Combating/eliminating dispersion-induced fading using suppressed carrier link for OFDM signal

We investigate the performance of 20-GHz radio over fibre (RoF) system having orthogonal frequency division multiplexed (OFDM) as radio signal using two modulation techniques – balanced detection for intensity modulation direct detection (IMDD) and coherent heterodyne detection suppressed carrier (SC) modulation. Dispersion-induced power fading is seen in conventional IMDD links due to the dependence of dispersion over frequency-dependent refractive index of the fibre. SC link is seen to compensate the power fading by terminating the direct current and even-order harmonics with the suppression of carrier along with balanced detection.     

Application of analytical solutions to simulate some mine inflow problems in underground coal mining

The paper considers the interaction of ground water flow characteristics, aquifer parameters and mining geometry in order to estimate mine water inflows. The ground water flow conditions include both steady and unsteady state flow in an infinite and finite aquifers to an imaginary pumping out well. Both linear and non-linear flow equations are discussed. The application of non-linear equations has indicated that with the use of appropriate terms in these equations both laminar as well as turbulent inflows can be simulated. Water inflow to underground dewatering tunnels are also discussed in terms of both laminar and turbulent flow. Mine water inflow to a mine discharging to multiple dewatering outlet is also included. The application of various techniques outlined enables a more realistic estimate of water inflow to be made which can be conductive to planning mine dewatering systems with reference to economics and safety.     

An appraisal of mathematical models to predict water inflows into underground coal workings

The paper describes various analytical and numerical models which have been used to predict the quantities of water flowing into underground mines. Analytical models of flow into wells are discussed briefly and their limitations when applied to mine water flow are listed. Numerical models designed specifically for underground mines are examined in detail under the three categories of water resource models, mine water models and methane and water models. The extent to which the available numerical models are applicable to British longwall coal mining operations is considered and the need for further work is identified.     

Temperature dependence of I-V characteristics and performance parameters of silicon solar cell

The temperature dependence of open-circuit voltage (V_oc) and curve factor (CF) of a silicon solar cell has been investigated in temperature range 295-320 K. The rate of decrease of V_oc with temperature (T) is controlled by the values of the band gap energy (E_g), shunt resistance (R_sh) and their rates of change with T. We have found that R_sh decreases nearly linearly with T and its affect on dV_oc/dT is significant for cells having smaller R_sh values. Series resistance also changes nearly linearly with voltage. CF depends not only on the value of R_s and other parameters but also on the rate of change of R_s with voltage. The rate of decrease of R_s with voltage and T are important to estimate the value of CF and its decrease with temperature accurately.     

Mixed convection from an isolated spherical particle

A numerical study on mixed convection around a hot spherical particle moving vertically downwards in a still fluid medium has been made. The flow field is considered to be axisymmetric for the range of Reynolds number (based on the diameter and the settling velocity of the particle) considered. A third-order accurate upwind scheme is employed to compute the flow field and the temperature distribution. The form of the wake and the thermal field is analyzed for several values of Grashof number and the Reynolds number. The influence of buoyancy on drag and the rate of heat transfer are studied. At moderate Reynolds number, recirculating eddy develops in the downstream of the sphere. With the rise of surface temperature this eddy collapses and the fluid adjacent to the heated surface develops into a buoyant plume above the sphere. The increase in surface temperature of the sphere delays the flow separation. Our results show that the drag force and the rate of heat transfer strongly depend on Grashof number for the moderate values of Reynolds number. The conjugate heat transfer from the moving sphere is also addressed in the present paper. We have compared our computed solution with several empirical and asymptotic expressions available in the literature and found them in good agreement.     

Gate leakage current reduction in IP3 SRAM cells at 45 nm CMOS technology for multimedia applications

We have presented an analysis of the gate leakage current of the IP3 static random access memory (SRAM) cell structure when the cell is in idle mode (performs no data read/write operations) and active mode (performs data read/write operations), along with the requirements for the overall standby leakage power, active write and read powers. A comparison has been drawn with existing SRAM cell structures, the conventional 6T, PP, P4 and P3 cells. At the supply voltage, V_DD = 0.8 V, a reduction of 98%, 99%, 92% and 94% is observed in the gate leakage current in comparison with the 6T, PP, P4 and P3 SRAM cells, respectively, while at V_DD = 0.7 V, it is 97%, 98%, 87% and 84%. A significant reduction is also observed in the overall standby leakage power by 56%, the active write power by 44% and the active read power by 99%, compared with the conventional 6T SRAM cell at V_DD = 0.8 V, with no loss in cell stability and performance with a small area penalty. The simulation environment used for this work is 45 nm deep sub-micron complementary metal oxide semiconductor (CMOS) technology, t_ox = 2.4 nm, V_thn = 0.22 V, V_thp = 0.224 V, V_DD = 0.7 V and 0.8 V, at T = 300 K.     

Time delays and angles of arrival estimation using known signals

Channel estimation in a multipath mobile communication system is addressed in this paper, and a novel approach based on the linear prediction in frequency domain and the singular value decomposition technique is presented for joint estimation of the angles of arrival and the time delays of multiple reflections of a known signal. Simulation results illustrating the performance of the proposed algorithm are included, and the results show that the proposed method is close in accuracy when compared to the iterative maximum-likelihood method. However, when the two methods are compared in computational complexity, it is demonstrated that the proposed method reduces the complexity to nearly half of that of the maximum-likelihood method. The Cramer–Rao bounds are computed for comparison.     

Design and analysis of all-optical up- and down-wavelength converter based on FWM of SOA-MZI for 60 Gbps RZ data signal

In this paper, the design and analysis of the all-optical up- and down-wavelength converter based on four-wave mixing (FWM) effect of semiconductor optical amplifier Mach–Zehnder interferometer (SOA-MZI) have been presented. The return-to-zero (RZ) modulated data signal at a bit rate of 60 Gbps has been evaluated for error-free operation to show the feasibility of proposed system at different pump wavelength. The converted signal power and quality factor are investigated as the function of variable signal power and pump power. The optimized operating input signal power of ?5 dBm with Q-factor of \(\sim \)28 dB for RZ modulated signal by using SOA-MZI structure with enhanced FWM effect. The important contribution of these investigations that it is possible to expand the optical network with limited available channel bandwidth by utilizing the wavelength converter and gives an approach to implement wavelength converter for future hybrid optical access networks.     

Shorting pin loaded dual-band compact rectangular microstrip antenna

Theoretical and experimental investigations carried out on shorted microstrip patch antenna for dual band operation. The investigations were carried out by varying the shorting-pin position from the edge to the centre of the patch; such an antenna provides a frequency tunability range from 0.88?GHz to 1.08?GHz for first resonance and from 2.20?GHz to 2.59?GHz for second resonance. A frequency ratio of about 2.91 to 2.2 for the two operating frequencies is observed. When the shorting-pin position is close to centre or at the centre of the patch, a single resonant frequency is observed. It is also observed that the resonant frequency of the antenna heavily depends upon the thickness of the substrate, dielectric constant of the substrate and radius of the shorting-pin.     

Fast complex memory polynomial-based adaptive digital predistorter

Today's 3G wireless systems require both high linearity and high power amplifier (PA) efficiency. The high peak-to-average ratios of the digital modulation schemes used in 3G wireless systems require that the RF PA maintain high linearity over a large range while maintaining this high efficiency; these two requirements are often at odds with each other with many of the traditional amplifier architectures. In this article, a fast and easy-to-implement adaptive digital predistorter has been presented for Wideband Code Division Multiplexed signals using complex memory polynomial work function. The proposed algorithm has been implemented to test a Motorola LDMOSFET PA. The proposed technique also takes care of the memory effects of the PA, which have been ignored in many proposed techniques in the literature. The results show that the new complex memory polynomial-based adaptive digital predistorter has better linearisation performance than conventional predistortion techniques.