Dearomatization of Diesel by Solvent Extraction: Influence of the Solvent Ratio and Temperature on Diesel Raffinate Properties

To comply with the stringent environmental regulations concerning the quality of fuels the production of ultra low sulfur fuels is obligatory. Consequently, the removal of aromatics from fuels has turned to be a serious issue. This is due to the fact that the presence of aromatics in fuel deters the ultra-low sulfur fuel production. Therefore the researcher’s interest has involved the dearomatization of fuels. As a result of the dearomatization, the quality of fuels improves tremendously. Here, solvent extraction was performed to dearomatize a feedstock sample with 20.1% aromatic and 166 ppm sulfur using acetonitrile. The extraction was performed at low temperature and ambient atmospheric pressure. The aromatic contents were determined via HPLC, while the ASTM methods were employed in other parameters determination. The results showed 72% minimum yield, 8.6% aromatic content, 58–64 cetane index, 73.2 ppm sulfur content, 5.4 viscosity, RI 1.4535, aniline point 82.15, specific gravity 0.824–0.812 with API 40.32–42.88 and flash point 70–78°C. The boiling range of the produced diesel fraction raffinate (172–373°C) that corresponds to C₈–C₂₄ cuts render it a potential candidate for other petrochemical applications.     

Modest but useful erasure technique for DPSK

A simple selective erasure forward error correction (FEC) technique for differential phase shift keyed (DPSK) data is presented. The method provides a modest coding gain and requires very little overhead and computation. It is very similar to the Wagner code and may be useful as a stand alone technique in some applications and as a preconditioner to more sophisticated FEC techniques in others     

The impact of metal-1 plasma processing-induced hot carrierinjection on the characteristics and reliability of n-MOSFETs

We report on plasma processing-induced damage to sub-half-micron n-MOSFETs that is invoked by potential differences between device terminals during metal-1 plasma processing. The damage mechanism is identified as hot carrier (HC) injection promoted by the layout of metal-1 interconnect. Using conventional and modified charge pumping techniques as well as transistor parameter measurements, we also investigate the impact of the damage on device reliability by applying Fowler-Nordheim (FN) and hot carrier stresses. The results show the severe impact of this damage on device reliability, which is attributed to trapping of positive charge at the drain edge that is enough to shorten the device channel     

A BIST-DFT technique for DC test of analog modules

Among test techniques for analog circuits, DC test is one of the simplest method for BIST application since easy to integrate test pattern generator and response analyzer are conceivable. Precisely, this paper presents such an investigation for a CMOS operational amplifier that is latter extended to active analog filters. Since the computation of fault coverage is still a controversy question for analog cells, we develop first an evaluation technique for optimizing the tolerance band of the measurements to test. Then, using some DFT solutions we derive single DC pattern and discuss the minimal number of points to test for the detection of defects. A response analyzer is integrated with a Built-in Voltage Sensor (BIVS) and provides directly a logic pass/fail test result. Finally, the extra circuitry introduced by this BIST technique for analog modules does not exceed 5% of the total silicon area of the circuit under test and detects most of the faults.     

Error rate for optimal follower tone-jamming

The performance of a countermeasure technique in the presence of the optimal follower multitone jammer is evaluated for frequency-hopped spread spectrum (FHSS) communications. It is shown that, with a certain probability, the optimal jammer will have dual tones in a frequency channel     

Capacity analysis of a TDMA-based slow-frequency-hopped cellularsystem

Time-division multiple access (TDMA)-based systems have been adopted as the first generation digital cellular standards in North America, Europe, and Japan. The increasing demand for capacity motivates the study of alternate systems and enhancements to the adopted TDMA standards. In particular, CDMA techniques using direct sequence and slow frequency hopping have been suggested. We analyze the capacity of a slow-frequency-hopped TDMA-based cellular system via calculation of the outage probability. Expressions for the outage probability as a function of voice activity, power control, and antenna diversity are provided for mobile-to-base transmission. These expressions are used to evaluate the system capacity (users/MHz/cell) based on simulating mobile locations within 37 hexagonal cells. The sensitivity to power control error, voice activity factor, and soft capacity of the system is investigated     

The exergy fields in transport processes: Their calculation and use

This paper is a brief review of the method for analyzing the space and time dependent exergy and irreversibility fields in processes. It presents the basic equations, the method for their use, major literature sources, and three examples from the authors' work: flow desiccation, combustion of oil droplets, and combustion of pulverized coal. Conclusions from this Second Law analysis are used to attempt process improvement suggestions.     

Free convection performance of circular cavities having two active curved vertical sides and two inactive curved horizontal sides

A detailed review of the archival reveals that the heat transfer and fluid flow characteristics of circular cavities have not been investigated so far and of course their physical features are not understood. A prominent application of these cavities arises in the miniaturized packaging of electronic components that are subject to strict constraints. This paper addresses primarily steady-state laminar natural convection of air in a circular cavity of diameter H inscribed in a square cavity of side H where the corresponding sides are in contact at four points. A third cavity, an arc–square cavity whose shape lies between the square and circular cavity shapes is included in the analysis. The finite volume method is used to perform the numerical simulations. The methodology takes into account the second-order-accurate QUICK scheme for the discretization of the convective term, whereas the pressure–velocity coupling is handled with the SIMPLE scheme. Since the air is not assumed a Boussinesq gas, it was decided to take all thermophysical properties as temperature-dependent. In the end, it has been demonstrated that the circular cavity possesses a superior balance between heat transfer enhancement and size in cross-section area in comparison with the standard square cavity. The side of the square cavity is similar to the diameter of the circular cavity.     

Analytical EVM, BER, and TD performances of the OFDM systems in the presence of jointly nonlinear distortion and IQ imbalance

The orthogonal frequency-division multiplexing (OFDM) systems are highly sensitive to the nonlinear distortions introduced by the high-power amplifier at the transmitter and to the in-phase and quadrature (IQ) imbalance of the down converter at the receiver. In this paper, the joint effects of these impairments on the performance of the OFDM systems with M signal points quadrature amplitude modulation (M-QAM) are investigated. Moreover, the analytical formulations for the error vector magnitude, the bit error rate, and the total degradation performances of the M-QAM-OFDM systems in additive white Gaussian noise channels as a function of the output back off and IQ imbalance parameters are derived. The computer simulation results confirm the accuracy and validity of our proposed analytical approach.     

Trust establishment in cooperative wireless relaying networks

In cooperative wireless networks, relay nodes are employed to improve the performance of the network in terms of throughput and reliability. However, the presence of malicious relay nodes in the network may severely degrade the performance of the system. When a relay node behaves maliciously, there exists a possibility that such a node refuses to cooperate when it is selected for cooperation or deliberately drops the received packets. Trust establishment is a mechanism to detect misbehaving nodes in a network. In this paper, we propose a trust establishment method for cooperative wireless networks by using Bayesian framework. In contrast with the previous schemes proposed in wireless networks, this approach takes the channel state information and the relay selection decisions into account to derive a pure trust value for each relay node. The proposed method can be applied to any cooperative system with a general relay selection policy whose decisions in each cooperative transmission are independent of the previous ones. Moreover, it does not impose additional communication overhead on the system as it uses the available information in relay selection procedure. Copyright © 2012 John Wiley & Sons, Ltd.