Multi-dimensional transient mathematical simulator of blast furnace process based on multi-fluid and kinetic theories

The ironmaking blast furnace is regarded as one of the biggest and most complex industrial reactors, because it includes various materials like gas, lump granular materials, liquids and powders and more than 30 major reactions and phase changes in a single reaction vessel. The mathematical simulator of this process developed in this study used the multi-fluid treatment as its framework, since the motions of these materials were governed by different flow mechanisms. The rates of the interactions among the phases and the chemical reactions were evaluated based on kinetic theories. The model successfully reproduced the fields of velocity, temperature and reaction in the furnace and its validity was confirmed. The simulator was also applied to a novel operation, namely the top gas recycling combined with the carbon-composite iron-ore charging and the waste plastics injection, and the advantages in furnace efficiency and environmental load were quantitatively indicated.     

Effect of Silicon Dioxide on the Thermal Diffusivity of Aluminum Nitride Ceramics

The thermal diffusivity of AlN ceramics was significantly decreased by the addition of SiO₂. The AlN ceramics with 4 wt% SiO₂ could not be densified by pressureless sintering in the temperature range 1400° to 1800°C. The thermal diffusivity of these samples was very low because of their porous structure. The AlN ceramics containing 2, 4, and 8 wt% SiO₂ were densified by hot-pressing and also had low thermal diffusivity. In these samples, the grains of the 27R polytype that resulted from the reaction between AlN and SiO₂ were dispersed, obstructing the conduction of heat. The relation between the amount of 27R polytype and the thermal diffusivity of the AlN ceramics was determined.     

An absolute requirement of fructose 1,6-bisphosphate for the Lactobacillus caseiL-lactate dehydrogenase activity induced by a single amino acid substitution

Lactobacillus casei allosteric L-lactate dehydrogenase (L-LDH)absolutely requires fructose 1,6-bisphosphate [Fru(1,6)P2] forits catalytic activity under neutral conditions, but exhibitsmarked catalytic activity in the absence of Fru(1,6)P₂ underacidic conditions through the homotropic activation effect ofsubstrate pyruvate. In this enzyme, a single amino acid replacement,i.e. that of His205 conserved in the Fru(1,6)P₂-binding siteof certain allosteric L-LDHs of lactic acid bacteria with Thr,did not induce a marked loss of the activation effect of Fru(1,6)P₂or divalent metal ions, which are potent activators that improvethe activation function of Fru(1,6)P₂ under neutral conditions.However, this replacement induced a great loss of the Fru(1,6)P₂-independentactivation effect of pyruvate or pyruvate analogs under acidicconditions, consequently indicating an absolute Fru(1,6)P₂ requirementfor the enzyme activity. The replacement also induced a significantreduction in the pH-dependent sensitivity of the enzyme to Fru(1,6)P₂,through a slight decrease and increase of the Fru(1,6)P₂ sensitivityunder acidic and neutral conditions, respectively, indicatingthat His205 is also largely involved in the pH-dependent sensitivityof L.casei L-LDH to Fru(1,6)P₂. The role of His205 in the allostericregulation of the enzyme is discussed on the basis of the knowncrystal structures of L-LDHs.     

Ni-Mo alloying of nickel surface by alternating pulsed electrolysis using molybdenum(VI) baths

Electrochemical Ni-Mo alloying of the surface of a nickel substrate was investigated using alternating pulsed electrolysis in an aqueous solution containing only molybdate ions (MoO₄²⁻) as a metal ion component. In this electrochemical process, the nickel substrate was slightly dissolved during the anodic pulses, providing nickel ions into the solution in the vicinity of the substrate, while Ni and Mo were both electrodeposited on the substrate surface during the subsequent cathodic pulses. Through the optimization of anodic and cathodic conditions independently based on a set of direct-current electrolysis data, amorphous Ni-Mo alloy layers were found to be formed at the surface of the nickel substrate by the alternating pulsed electrolysis using the MoO₄²⁻ solution of pH 3.0-5.0. The conditions for Ni-Mo alloy formation were discussed in terms of the dissolving regime of ionic species in the electrolytes determined by an equilibrium calculation.     

Residues important for the function of a multihelical DNA binding domain in the new transcription factor family of Cam and Tet repressors

We report that some prokaryotic repressors including CamR andTetR belong to the same family. CamR and TetR bind to DNA usinga multihelical DNA binding domain (DBD) at the N-termini ofthe proteins, while the C-termini are important for regulatingthe DNA binding in a manner dependent on their co-factors (camphorfor CamR, tetracycline for TetR). In all, 11 important aminoacid positions have been identified in the CamR DBD by the systematicsubstitution of residues by Ala. Of the 11 positions, 10 areeither buried in the core, and thus important for creating thehydrophobic environment, or exposed on the surface, and thusimportant for binding to DNA. The eleventh residue, Gly, seemsto be important for a loop structure. The DNA binding mode ofthis type of DBD and a general mechanism of regulating theirDNA binding are discussed in reference to the crystal structureof TetR [Hinrichs et al., (1994) Science, 264, 418–420].     

Radiation-induced polymerization of ethylene in pilot plant. III. Heavy-phase recycling process

Radiation-induced polymerization of ethylene using aqueous tert-butyl alcohol as medium was carried out in a large-scale pilot plant with a 50-liter central source-type reactor at a pressure of 105 to 395 kg/cm², temperature of 30° to 80°C, mean dose rate of 4.5 × 10⁴ to 1.9 × 10⁵ rads/hr, ethylene feed rate of 5.5 to 23.5 kg/hr, and medium feed rate of 21 to 102 l./hr. The space–time yield and molecular weight of the polymer were in the range of 4.7 to 16.8 g/l.-hr and 1.3 × 10⁴ to 8.9 × 10⁴, respectively. The space–time yield and molecular weight increased with mean residence time at 30°C, whereas at 80°C they became almost independent of the time. The space–time yield increased with pressure and dose rate, slightly decreased with temperature, and was maximum at ethylene molar fraction of 0.5. The polymer molecular weight increased with pressure and ethylene molar fraction, and decreased with dose rate and temperature. The total amount of deposited polymer on the reactor wall, source case wall, and scraping blades was usually less than 1 kg, which was negligibly small for the analysis of polymerization. Continuous discharge of the polymer slurry and production of fine-powder polyethylene were successfully carried out. In the central source-type reactor, a dose rate of 1.9 × 10⁵ rads/hr was obtained with a ⁶⁰Co source of ca. 12 kCi.     

Exploring and exploiting a historical corpus for Arabic

This paper presents a historical Arabic corpus named HAC. At this early embryonic stage of the project, we report about the design, the architecture and some of the experiments which we have conducted on HAC. The corpus, and accordingly the search results, will be represented using a primary XML exchange format. This will serve as an intermediate exchange tool within the project and will allow the user to process the results offline using some external tools. HAC is made up of Classical Arabic texts that cover 1600 years of language use; the Quranic text, Modern Standard Arabic texts, as well as a variety of monolingual Arabic dictionaries. The development of this historical corpus assists linguists and Arabic language learners to effectively explore, understand, and discover interesting knowledge hidden in millions of instances of language use. We used techniques from the field of natural language processing to process the data and a graph-based representation for the corpus. We provided researchers with an export facility to render further linguistic analysis possible.     

A modified θ projection model for constant load creep curves-II. Application of creep life prediction

To minimize the deviation of the predicted creep curves obtained under constant load conditions by the original θ projection model, a new modified version that can be expressed by $\epsilon ={\theta }_1\left(1-e^{-{\theta }_{2}t}\right)+{\theta }_3\left(e^{{\theta }_4{e}^{{\theta }_5\epsilon }t}-1\right)$, was derived and experimentally validated in our last study. In the present study, the predictive capability of the modified θ projection model was investigated by comparing the simulated and experimentally determined creep curves of K465 and DZ125 superalloys over a range of temperatures and stresses. Furthermore, the linear relationship between creep temperature and initial stress was extended to the 5-parameter model. The results indicated that the modified model could be used as a creep life prediction method, as it described the creep curve shape and resulted in predictions that fall within a specified error interval. Meanwhile, this modified model provides a more accurate way of describing creep curves under constant load conditions. The limitations and future direction of the modified model were also discussed. In addition, this modified θ projection model shows great potential for the evaluation and assessment of the service safety of structural materials used in components governed by creep deformation.     

Thermal conductivity and phonon scattering mechanisms in La#x2212;x#x2212;x#x2212;xMxCuO4

The thermal conductivity of high density La_2–xM_xCuO₄ (M=Ba, Sr) sintered materials was measured between 15K and 150K for the various concentrations of Ba and the phonon thermal conductivity was analyzed comparing with that of Nd_2–xCe_xCuO₄. The pretty large value for pure La₂CuO₄ was drastically diminished by substituting La by a small amount of Ba atoms especially at low temperatures. It was found that a new type of the phonon scattering center such as a two-level tunneling must be taken account of in order to explain the observed reduction.