Zur Bestimmung der Wärmeleitfähigkeit von Eisenschwamm

Messung der Wärmeleitfähigkeit von Eisenschwamm nach der Laserimpuls-Methode bei Temperaturen zwischen 20 und 1400°C. Vergleich der Meßwerte mit der Wärmeleitfähigkeit von Reineisen. Theoretische Überlegungen zum Temperaturverlauf der Wärmeleitfähigkeit des Eisenschwamms.     

Information transport and computation in nanometre-scale structures

We discuss two examples of novel information-transport and processing mechanisms in nanometre-scale structures. The local modulation and detection of a quantum state can be used for information transport at the nanometre length-scale, an effect we call a 'quantum mirage'. We demonstrate that, unlike conventional electronic information transport using wires, the quantum mirage can be used to pass multiple channels of information through the same volume of a solid. We discuss a new class of nanometre-scale structures called 'molecule cascades', and show how they may be used to implement a general-purpose binary-logic computer in which all of the circuitry is at the nanometre length-scale.     

Einfluß von Werkstoffzusammensetzung und Ferritkorngröße auf die Konstanten der Ludwik-Gleichung

Beschreibung der Spannung-Dehnung-Kurve ferritischer und ferritisch-perlitischer Stähle mit der Ludwik-Gleichung. Einfluß der Korngröße auf den Vorfaktor der Ludwik-Gleichung. Anstieg des Vorfaktors mit zunehmendem C- und Mn-Gehalt sowie mit steigendem Perlitanteil am Gefüge. Korngrößenunabhängigkeit des Verfestigungsexponenten. Einfluß des C- und Mn-Gehaltes auf den Verfestigungsexponenten.     

A note on upwinding and anisotropic balancing dissipation in finite element approximations to convective diffusion problems

In one dimension, Petrov—Galerkin nonsymmetric weighting for the convective diffusion equation can be interpreted as an added dissipation. The addition of an appropriate amount of dissipation can therefore give the same oscillation-free solutions as the ‘unwinding’, Petrov—Galerkin, finite element methods. The ‘balancing dissipation’ is optimally chosen so that excessive dissipation does not occur. A scheme is presented for extending this approach to two-dimensional problems, and numerical examples show that the new method can be used with improved computational efficiency.     

Quantitative characterisation of chemical inhomogeneities in Al-Ag using high-resolution Z-contrast STEM

The incoherent imaging model is applied to interpret high-resolution Z-contrast micrographs. A simple method for a column-by-column resolved characterisation of Ag-rich precipitates in Al-Ag is developed. No information on the detailed imaging process is required. Evaluating the high-angle scattering intensities of Al and Ag by image analysis, the number of Ag atoms contained in individual atomic columns can be determined accurately and moreover, the thickness of the thin foil can be calculated. Multislice simulations confirm the broad validity of the incoherent imaging model for Z-contrast STEM and are used to check the method presented. Finally, the image analysis is applied to experimental Z-contrast images of Guinier-Preston zones in Al-3 at% Ag. The Ag content of the individual atomic columns can be determined with an accuracy better than +/-10%.     

High-speed free-flow electrophoresis on chip

A microfluidic device has been developed for continuous separation in free-flow electrophoresis (FFE) mode. A mixture of two fluorescent reagents is separated into two component streams in 75 ms using a sample flow rate of 2 nL/s. The residence time of sample in the whole separation compartment is 2 s. The separation bed volume is 0.2 microL. The chip has also been used for free-flow electrophoresis of fluorescein-5-isothiocyanate-labeled amino acids in both aqueous and binary media. The short residence time and small sample flow rate make the FFE chip feasible for on-line monitoring on production lines and other chemical or biochemical processes. The in-house-made chip was composed of a plain glass substrate of 1.5-mm thickness and a PDMS layer of 0.3-mm thickness with micromachined channels. The channel design presented in this paper is versatile. With the same kind of PDMS substrates, chips for various purposes can be made depending on the locations of the reservoirs, which are cut out on the PDMS substrate. The results presented verify the scaling laws and allow prediction of FFE performances comparable to what is now state of the art on capillary electrophoresis chips.     

Visual Analysis of Trajectories in Multi‐Dimensional State Spaces

Multi‐dimensional data originate from many different sources and are relevant for many applications. One specific sub‐type of such data is continuous trajectory data in multi‐dimensional state spaces of complex systems. We adapt the concept of spatially continuous scatterplots and spatially continuous parallel coordinate plots to such trajectory data, leading to continuous‐time scatterplots and continuous‐time parallel coordinates. Together with a temporal heat map representation, we design coordinated views for visual analysis and interactive exploration. We demonstrate the usefulness of our visualization approach for three case studies that cover examples of complex dynamic systems: cyber‐physical systems consisting of heterogeneous sensors and actuators networks (the collection of time‐dependent sensor network data of an exemplary smart home environment), the dynamics of robot arm movement and motion characteristics of humanoids.     

Fixed mesh front‐tracking methodology for finite element simulations

A direct front‐tracking method using an Eulerian–Lagrangian formulation is developed in two space dimensions. The front‐tracking method is general in that it can track any type of interface once its local velocity is specified or has been determined by calculation. The method uses marker points to describe the interface position and tracks the interface evolution on a fixed finite‐element mesh, including growth, contraction, splitting and merging. Interfacial conditions are applied directly at the interface position. The method is applied to three scenarios that involve different interface conditions and are based on energy and mass diffusion. The three calculations are for the dendritic solidification of a pure substance, the cellular growth of an alloy, and the Ostwald ripening of silica particles in silicon. Numerical results show that very complicated interface morphologies and topological changes can be simulated properly and efficiently. Copyright © 2004 John Wiley & Sons, Ltd.