Production of dihomo-γ-linolenic acid byMortierella alpina 1S-4

The mycelial dihomo-γ-linolenic acid content of an arachidonic acid-producing fungus,Mortierella alpina 1S-4, was found to increase, with an accompanying marked decrease in its arachidonic acid content, on cultivation with sesame oil. The resultant mycelia were found to be a rich source of dihomo-γ-linolenic acid. This unique phenomenon was suggested to be due to specific repression of the conversion of dihomo-γ-linolenic acid to arachidonic acid by the oil. After fractionation of the oil with acetone into oil and non-oil fractions, it was found that the effective factor(s) was present in the non-oil fraction. In a study on optimization of the culture conditions for the production of dihomo-γ-linolenic acid byM. alpina 1S-4, a medium containing glucose, yeast extract and the non-oil fraction was found to be suitable for the production. Under the optimal conditions in a 50-1 fermentor, the fungus produced 107 mg of dihomo-γ-linolenic acid/g dry mycelia (2.17 g/l of culture broth). This value accounted for 23.1% of the total fatty acids in the lipids extracted from the mycelia. The mycelia were also rich in arachidonic acid (53.5 mg/g dry mycelia, 11.2%). Other major fatty acids in the lipids were palmitic acid (24.1%), stearic acid (7.0), oleic acid (20.1), linoleic acid (6.6) and γ-linolenic acid (4.1). On leave from Suntory Ltd.     

Abstracts

Journal of the American Oil Chemists' Society -     

Silica-supported cobalt catalysts for the selective reduction of nitrogen monoxide with propene

Catalytic behavior of silica-supported transition metals for NO reduction with propene in the presence of oxygen was investigated. While both silica and cobalt oxides did not show any activity for the selective NO reduction, impregnated CoO/SiO₂ prepared from cobalt acetate showed good activity although the preparation conditions had significant effect on the activity. It was suggested that highly dispersed surface Co²⁺ ions on silica are responsible for the catalytic activity.     

Synthesis and electrode performance of layered nickel dioxide containing alkaline ions

Several polymorphs of layered nickel dioxide were prepared by using the chemical insertion of alkaline ions into Li_0.10NiO₂. We used aqueous AOH (A = Li, Na, K) solutions as reducing agents. Sodium and potassium insertion resulted in hydrated layered compounds that can be classified as γ-NiOOH with high crystallinity, while lithium insertion occurred without hydration. We discuss the coordination environment around the A⁺ ions for these inserted compounds. The thermal behavior, analyzed using high temperature (HT) X-ray diffraction (XRD) and thermogravimetric (TG) measurements, indicated that heating the hydrate at 150 °C yielded its dehydrate. The electrode performance of the nickelate was studied in lithium cells. We discuss the effect of interlayer water on cell rechargeability and the similarity between these nickelate and hydrated manganese dioxide (birnessite).     

Heterogeneous nucleation of organic vapours on a cold substrate

The heterogeneous phase transition of the organic vapours, cyclohexane and p-xylene, on a cold substrate was observed by cooling the substrate at a slow rate under reduced pressure conditions. Either organic vapour at a vapour pressure lower than 130 Pa formed directly solid crystals but p-xylene vapour at a higher vapour pressure formed liquid condensates with subsequent formation of solid crystals. The dependence of the critical supersaturation ratios on the critical temperatures and the physical properties of the organic vapours has been clarified by the equation derived on the basis of classical nucleation theory.     

Bromine addition and successive amine substitution of mesoporous ethylenesilica: Reaction, characterizations and arsenate adsorption

Bromination and subsequent ethylenediamine substitution of the CC double bond in mesoporous ethylenesilica were carried out to explore the characteristics of this periodic mesoporous organosilica. The structures of the products (BrPMO and EDA–BrPMO, respectively) were analysed by IR, Br K-edge EXAFS and NMR spectroscopies, as well as X-ray diffraction and nitrogen adsorption. We showed (1) that the formulae of the two products that formed were [CHBrSiO_1.5]_0.45[CHSiO_1.5]_0.55 and [NH₂CH₂CH₂NHCHSiO_1.5]_0.05 [CHBrSiO_1.5]_0.40[CHSiO_1.5]_0.55, respectively, (2) that the addition of Br₂ at room temperature occurred on the CC double bonds with disturbing the framework structure, (3) that IR absorption band of CC bonds that reacted with Br₂ is significantly different from that of inactive CC bond, (4) that the length of the C–Br bond was considerably longer than in conventional alkyl bromides, and (5) that a large proportion of the ν(C–Br) band remained at the same position in the IR absorption spectrum after the ethylenediamine (EDA) substitution, while a new ν(C–Br) absorption also appeared. The mechanisms of these reactions are discussed at both the micro and mesoscopic levels.

Arsenate adsorption on EDA–BrPMO, in which the EDA is directly bound to the “surface” of the mesopores, was compared with adsorption on EDA–Pr–PMO, which was prepared by the direct synthesis of 3-chloropropyl-functionalized mesoporous ethanesilica followed by the substitution of Cl with EDA. The strength of the adsorption, as measured with the distribution coefficient, was greater for the former adsorbent than the latter. The origin of this difference was attributed to the distance between amino group and the surface.     

《时尚学:时尚研究概述》前言

本文是<时尚学:时尚研究概述>(Fashion-ology:An Introduction to Fashion Studies)一书的前言部分,概括了书中的一些主要观点.作者认为应该将对时尚的研究与对衣着的研究区分开来.时尚无关服饰,它只是一种信仰.她主张应该把时尚研究列入社会科学、人文科学的研究范围内,并介绍了人们在心理学、社会心理学、历史学、艺术史、文化人类学和经济学等领域对时尚的研究.她所提倡的时尚理论认为,对时尚的研究应该从时尚系统入手,研究它整个运作过程中的社会属性.     

Control of molecular weight distribution of isotactic polypropylene obtained by a MgCl2-supported TiCl4 catalyst

It is of great importance in propene polymerization to control molecular weight and molecular weight distribution as well as isotacticity. Propene polymerization was carried out with an isospecific MgCl₂/TiCl₄-Cp₂TiMe₂ catalyst in the presence of various kinds of external Lewis bases. It was found that the molecular weight distribution of the isotactic polymer could be controlled while retaining high activity, high isospecificity and high molecular weight only by changing the kind and/or amount of the Lewis bases. © 1997 Elsevier Science Ltd.     

Short- and long-term strength characteristics of particulate-filled cast epoxy resin

Particulate-filled thermosetting composites are widely used, yet little systematic work has been done on their long-term strength characteristics. In this study short-term tensile, flexural, and impact tests as well as tensile creep-rupture tests were made for unfilled and filled epoxy to clarify the effects of filler size, filler content, and temperature. Fillers used were silica, alumina particles, and glass beads. Test temperatures were varied from 25 to 110°C. As a result of short-term testing, it was found that the Petch relation held between strength and filler size if brittle fracture occurred, while a strength and filler size if brittle fracture occurred, while a strengthening effect existed when ductile fracture occurred. On creeprupture testing, a strengthening is observed with filler size and content for silica and glass beads. The Arrhenius plot of rupture time for various filler sizes and contents converges to a characteristic point corresponding to the glass transition temperature of the material. Using this relation, a modified Larson-Miller master rupture curve is proposed which can predict the long-term strength of particulate-filled thermosetting composites as functions of rupture time, temperature, filler size, and content.     

Evaluating card-based protocols in terms of execution time

International Journal of Information Security - Card-based cryptography is an attractive and unconventional computation model; it provides secure computing methods using a deck of physical cards....