Polarity Effect and Electromagnetic Radiation of Partial Discharge Accompanying Growth of Electrical Tree

We have investigated the characteristics of radiated electromagnetic (EM) waves from positive and negative partial discharges (PD) in epoxy resin and cross‐linked polyethylene. We found that there is a correlation among the EM level from PD, the positive PD current, and electrical trees. Therefore, the growth of an electrical tree produces a lot of positive PD. We have also investigated the characteristics of the frequency region of EM waves from PD in air, insulating oil, and liquid epoxy in addition to the above insulators. EM waves were detected in the frequency region of 40 MHz to 300 MHz from positive and negative PD in epoxy resin and cross‐linked polyethylene. EM waves were also detected in the frequency region of 40 MHz to 150 MHz from positive and negative PD in air. In the case of insulating oil and liquid epoxy, EM waves were detected in the frequency regions of 40 MHz to 150 MHz from positive PD, and 40 MHz to 250 MHz from negative PD. The frequency region differed depending on the material and the discharge polarity. Our investigation indicates that the cause is differences in electric field strength at the time of PD occurrence.     

A method for testing the interface toughness of ceramic environmental barrier coatings (EBCs) on ceramic matrix composites (CMCs)

A simple interface fracture test for ceramic environmental barrier coatings (EBCs) on ceramic matrix composites (CMCs) was developed. A variation on the asymmetric double cantilever beam (ADCB) test was proposed so that the interface toughness could be measured in a small specimen of simple shape without applying interlaminar loading to the CMC substrate. The proposed test was applied to an EBC consisting of a mullite layer and Si bond coat on a monolithic SiC substrate. A pre-crack was introduced by pop-in cracking, and then a notch overlapping the pre-crack was machined. The pre-crack was opened by inserting a wedge into the notch. From the critical notch opening displacement the crack starts to propagate, interface toughness is calculated. The measured interface toughness was 4.1?J/m2. Finally, the application range of the test was discussed and suggestions were made for introduction of the notch and pre-crack.     

Push-Pull Fatigue of Sintered Silicon Nitride Ceramics at Elevated Temperatures

The fatigue tests under push-pull completely reversed loading and pulsating loading were performed for silicon nitride ceramics at elevated temperatures. Then the effects of stress wave form, stress rate, and cyclic understressing on fatigue strength, and cyclic straining behavior, were examined. The cycle-number-based fatigue life is found to be shorter under trapezoidal stress wave loading than under triangular stress wave loading, and to become shorter with increasing hold time under the trapezoidal stress wave loading. Meanwhile, the equivalent time-based life curve, which is estimated from the concept of slow crack growth, almost agrees with the static fatigue life curve in the short and intermediate life regions, showing the small cyclic stress effect and the dominant stress-imposing period effect on cyclic fatigue life. The fatigue strength increased in stepwise stress amplitude increasing test, where stress amplitude is increased stepwise every given number of stress cycles, at 1100° and 1200°C. Occurrence of cyclic strengthening was proved through a gradual decrease in strain amplitude during a pulsating loading test at 1200°C in this material, corresponding to the above cyclic understressing effect on fatigue strength.     

The Role of microRNAs in Cholangiocarcinoma

Cholangiocarcinoma (CCA), an aggressive malignancy, is typically diagnosed at an advanced stage. It is associated with dismal 5-year postoperative survival rates, generating an urgent need for prognostic and diagnostic biomarkers. MicroRNAs (miRNAs) are a class of non-coding RNAs that are associated with cancer regulation, including modulation of cell cycle progression, apoptosis, metastasis, angiogenesis, autophagy, therapy resistance, and epithelial–mesenchymal transition. Several miRNAs have been found to be dysregulated in CCA and are associated with CCA-related risk factors. Accumulating studies have indicated that the expression of altered miRNAs could act as oncogenic or suppressor miRNAs in the development and progression of CCA and contribute to clinical diagnosis and prognosis prediction as potential biomarkers. Furthermore, miRNAs and their target genes also contribute to targeted therapy development and aid in the determination of drug resistance mechanisms. This review aims to summarize the roles of miRNAs in the pathogenesis of CCA, their potential use as biomarkers of diagnosis and prognosis, and their utilization as novel therapeutic targets in CCA.     

Abscopal Effect of Frozen Autograft Reconstruction Combined with an Immune Checkpoint Inhibitor Analyzed Using a Metastatic Bone Tumor Model

We evaluated the abscopal effect of re-implantation of liquid nitrogen-treated tumor-bearing bone grafts and the synergistic effect of anti-PD-1 (programmed death-1) therapy using a bone metastasis model, created by injecting MMT-060562 cells into the bilateral tibiae of 6–8-week-old female C3H mice. After 2 weeks, the lateral tumors were treated by excision, cryotreatment using liquid nitrogen, excision with anti-PD-1 treatment, and cryotreatment with anti-PD-1 treatment. Anti-mouse PD-1 4H2 was injected on days 1, 6, 12, and 18 post-treatment. The mice were euthanized after 3 weeks; the abscopal effect was evaluated by focusing on growth inhibition of the abscopal tumor. The re-implantation of frozen autografts significantly inhibited the growth of the remaining abscopal tumors. However, a more potent abscopal effect was observed in the anti-PD-1 antibody group. The number of CD8+ T cells infiltrating the abscopal tumor and tumor-specific interferon-γ (IFN-γ)-producing spleen cells increased in the liquid nitrogen-treated group compared with those in the excision group, with no significant difference. The number was significantly higher in the anti-PD-1 antibody-treated group than in the non-treated group. Overall, re-implantation of tumor-bearing frozen autograft has an abscopal effect on abscopal tumor growth, although re-implantation of liquid nitrogen-treated bone grafts did not induce a strong T-cell response or tumor-suppressive effect.     

Thermal conductivity analysis using three‐dimensional microstructures of gelation freezing derived cellular mullite

The relationship between thermal conductivity and unidirectional cellular mullite microstructures created with the freeze casting route is discussed using actual three‐dimensional (3D) images, in which a homogenization method was conducted with microscopic models created from 3D images, the temperature variation in macroscopic models by the finite element method (FEM), and local heat conduction in microscopic models. The simulation results were consistent with the experimental results. This image‐based modeling technique was thus confirmed to be a strong tool for the prediction of various thermal properties of porous ceramics.     

Preparation of flexible transparent acryl/alumina nano-hybrid materials exhibiting low thermal expansion coefficient

In this study, flexible transparent hybrid films with low thermal expansion coefficient were prepared by combination of alumina fillers and polymerizable/non-polymerizable surface modifiers with carboxyl group. Four types of alumina fillers with different shape and size were used in this study, and could modify with surface modifiers containing carboxyl groups by electrostatic interaction and disperse homogeneously in resulting hybrid films regardless of the shape and size. So the hybrid films obtained showed high transmittance around 90%T, and it was considered, from transmission electron microscopic analysis, alumina fillers were dispersed at near original filler size, without aggregation. Moreover, thermal mechanical analysis cleared that the use of pillar or fiber type filler is more effective to reduce CTE compared with plate type fillers, especially CTE of hybrid film prepared with fiber type filler was drastically decreased to 17 ppm/K, while the influence by the difference of filler shape/size was not observed on tensile properties, surface hardness. By use of fiber type alumina filler and combination of polymerizable surface modifier and non-polymerizable surface modifier which seems to interact with matrix, for optimizing of the crosslink density, it was possible to reduce CTE, while the good mechanical properties was kept. Finally, hybrid film indicating low CTE value as 19 ppm/K, high flexibility (windable against 0.4 mm radius steel bar), and good tensile properties and surface hardness which were equal to or higher than those of matrix could prepared.     

Out-of-Plane Negative Magnetoresistance of Bi2Sr1.6La0.4CuO6+δ Single Crystals in the Underdoped Region

In order to investigate a relationship between the carrier concentration and negative magnetoresistance in the underdoped region, we have performed out-of-plane electrical resistivity measurements for underdoped Bi ₂ Sr _1.6 La _0.4 CuO ₆₊ single crystals. Giant negative magnetoresistance has been observed in the most abundant carrier sample with = 0.12 in our experiment. The negative magnetoresistance reduces with decreasing carrier concentration.     

MRF-based texture segmentation using wavelet decomposed images

In recent textured image segmentation, Bayesian approaches capitalizing on computational efficiency of multiresolution representations have received much attention. Most of the previous researches have been based on multiresolution stochastic models which use the Gaussian pyramid image decomposition. In this paper, motivated by nonredundant directional selectivity and highly discriminative nature of the wavelet representation, we present an unsupervised textured image segmentation algorithm based on a multiscale stochastic modeling over the wavelet decomposition of image. The model, using doubly stochastic Markov random fields, captures intrascale statistical dependencies over the wavelet decomposed image and intrascale and interscale dependencies over the corresponding multiresolution region image.