The evaluation of the emotion by near-infrared spectroscopy

Our purpose is to develop the technology for evaluating emotion objectively from the oxygenated hemoglobin within a brain. Nowadays, Japan is an aging society. The elderly people who need care will increase from now on increasingly. In the case of the person requiring the care who lost the function to convey an intention especially, the objective judgment to a physical and mental pain is required. Persons requiring care will also increase in number with the increase in this population. We gave subject stimulus of a comfortable or an uncomfortable sound and measured concentration of the oxygenated hemoglobin of a frontal lobe part by near-infrared spectroscopy. Based on the experimental result, a comfortable state or an uncomfortable state was distinguished by concentration of the oxygenated hemoglobin using the bayesian network. As a result, we were able to estimate the subject’s psychological condition.     

Voltage Control of Static Var Compensator for a Remote System Interconnected by Long‐Distance AC Cables

The voltage variation in a remote system is large when the system is connected by long‐distance AC cables due to the cable capacitance. In Japan, the longest 54‐km 66‐kV AC submarine cable interconnection between the Kyushu mainland and Goto Islands was commissioned in 2005. It was requested to mitigate the voltage variation caused by switching off and on one circuit of the two circuits in the AC cables when a fault occurs. Since the conventional voltage control methods such as transformer tap changer or shunt capacitor and reactor banks are not sufficient because of their slow response time, a static var compensator (SVC) was installed on the Goto Islands. In such an application, an SVC control method should be developed so as not to override the existing voltage control systems. This paper describes the SVC control method developed for the Goto Islands AC interconnection project, which can be applied to similar situations. The effectiveness of the control method was verified by the results of effective value simulation and of field testing, which was implemented before the SVC was commissioned in 2007. © 2013 Wiley Periodicals, Inc. Electr Eng Jpn, 186(3): 19–30, 2014; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.22337     

Time dependence of mesoscopic strain distribution for triaxial woven carbon-fiber-reinforced polymer under creep loading measured by digital image correlation

This paper presents the time dependence of the mesoscopic strain of a triaxial woven carbon-fiber-reinforced polymer under creep loading measured using digital image correlation (DIC). Two types of DIC techniques were employed for the measurement: conventional subset DIC and mesh DIC. Static tensile and creep tests were carried out, and the time dependence of the mesoscopic strain distribution was investigated by applying these techniques. The ultimate failure of this material is dominated by inter-bundle decohesion caused by relative rigid rotation and relating shear stress. Therefore, these were focused on in the present study. During the creep tests, the fiber directional strain, shear strain, and rotation were monitored using the DIC, and the mechanism for the increase in the specimen’s macro-strain over time was investigated based on the results obtained by the DIC measurement.     

Concentration of Antifouling Biocides and Metals in Sediment Core Samples in the Northern Part of Hiroshima Bay

Accumulation of Ot alternative antifoulants in sediment is the focus of this research. Much research had been done on surface sediment, but in this report, the accumulation in the sediment core was studied. The Ot alternative antifoulants, Diuron, Sea-Nine211, and Irgarol 1051, and the latter’s degradation product, M1, were investigated in five samples from the northern part of Hiroshima Bay. Ot compounds (tributyltin (TBT) and triphenyltin (TPT)) were also investigated for comparison. In addition, metal (Pb, Cu, Zn, Fe and Mn) levels and chronology were measured to better understand what happens after accumulation on the sea floor. It was discovered that Ot alternative antifoulant accumulation characteristics in sediment were like Ot compounds, with the concentration in the sediment core being much higher than surface sediment. The concentration in sediment seems to have been affected by the regulation of Ot compounds in 1990, due to the concentration of Ot alternative antifoulants and Ot compounds at the survey point in front of the dock, showing an increase from almost the same layer after the regulation.     

Alignment control of liquid crystals in a 1.0‐μm‐pitch spatial light modulator by lattice‐shaped dielectric wall structure

We achieved uniform liquid crystal (LC) alignment in lattice‐shaped dielectric walls 1 μm in pitch; this is a prerequisite when driving the individual pixels of spatial light modulators, facilitating the development of practical electronic holographic displays with a wide field of view. In lattice‐shaped dielectric walls, LC alignment becomes unstable, particularly on the bottom and the walls; the LC directors tend to align parallel to the walls. To overcome this problem, we created lattice‐shaped walls featuring partition plates that allow uniform LC alignment. When the plates confine LCs to small regions exhibiting spatial anisotropy, the LC elastic effect and wall anchoring forces align the LC directors parallel to the long anisotropic axis. We found that pixels 0.5 μm × 1.0 μm in pitch formed if the partition plates were sufficiently thick to allow shielding of electric field leakage.     

Multi-scale parallel finite element analyses of LDH sheet formability tests based on crystallographic homogenization method

A multi-scale parallel finite element (FE) procedure based on the crystallographic homogenization method was applied to the LDH sheet formability test analysis. For the multi-scale structure, two scales are considered. One is a microscopic polycrystal structure and the other is a macroscopic elastic plastic continuum. The analysis code can predict the formability of sheet metal in macro-scale, simultaneously the crystal texture and hardening evolutions in the micro-scale (Nakamachi E et al. Int J Plasticity 2007;23:450-8). Since huge computation time is required for the nonlinear dynamic multi-scale FE analysis, parallel computing technique based on domain partitioning of FE model for macro-continuum is introduced into the multi-scale code using the message passing interface (MPI) library and PC cluster (Kuramae H et al. In: Proceedings of the eighth international conference on computational plasticity, Part 1, 2005. p. 622-5). The explicit time stepping solution scheme in the nonlinear multi-scale FE dynamic problem is well-suited for parallel computing on distributed memory environment such as PC cluster because solving simultaneous equation is not required. We measured crystal morphologies of four automotive sheet metals, aluminum alloy sheet metals A6022-T43 and A5182-O, an asymmetrically rolled aluminum alloy sheet metal A6022-ASR, and mild steel HC220YD, by using the scanning electron microscope (SEM) with electron back scattered diffraction (EBSD) analyses, and defined a three-dimensional representative volume element (RVE) of micro polycrystal structure, which satisfy the periodicity condition of crystal orientation distribution. We evaluate not only macroscopic formability of the automotive sheet metals by the multi-scale LDH test analysis, but also microcrystalline texture evolution during plastic deformation. Furthermore, a relationship between the macroscopic formability and the microcrystal texture evolution was discussed through looking at multi-scale FE results. It is concluded that the mild steel HC220YD was the highest formability than the aluminum alloy sheet metals because of remaining and generating the γ-fiber texture, such as {1 1 1}〈1 1 0〉-{1 1 1}〈1 1 2〉 orientations, during plastic deformation.     

Effects of Atmospheric Composition on the Molecular Structure of Synthesized Silicon Oxycarbides

The dependence of silicon oxycarbides' chemical composition and molecular structure on their reaction conditions was tested by varying the atmosphere under which pyrolysis was performed. To obtain the silicon oxycarbides, densely cross‐linked silicone resin particles with an averaged diameter of 2 μm were pyrolyzed in various atmospheres of H₂, Ar, and CO₂, in the temperature range 700°C–1100°C. The residual mass of resin after pyrolysis was almost constant at 700°C, although their apparent colors varied distinctly. The sample obtained from the H₂ atmosphere was white, whereas that obtained from the CO₂ atmosphere was dark brown. Fourier‐transform infrared (FT‐IR) spectra of the residues suggested that the Si–O–Si network evolution was accelerated in the CO₂ atmosphere. Beyond 800°C, the chemical compositions of the compounds obtained from a H₂ atmosphere increasingly approached near‐stoichiometric SiO₂–xSiC composition with increasing the pyrolysis temperature. Compounds from a CO₂ atmosphere approached a composition of SiO₂–xC with no free SiC as the pyrolysis temperature increased. In the products from an Ar atmosphere, SiO₂–xSiC–yC compositions were typically obtained. The observed effects of the pyrolysis atmosphere on the resulting chemical compositions were analyzed in terms of thermodynamic calculations. Electron spin resonance (ESR) spectra revealed broad and intense signals from products obtained from either Ar or CO₂. Estimating from the signal intensity, the residual spin concentrations were in the range 10¹⁸–10¹⁹ g^?1. Meanwhile, the spectra from the samples obtained in H₂ showed weak and sharp signals with estimated spin concentrations ranging from 10¹⁶–10¹⁷ g^?1. This signal attenuation may have been due to the hydrogen capping of dangling bond formed during pyrolysis.