Research and development of liquid hydrogen (LH2) temperature monitoring system for marine applications

Monitoring the temperature in liquid hydrogen (LH₂) storage tanks on ships is important for the safety of maritime navigation. In addition, accurate temperature measurement is also required for commercial transactions. Temperature and pressure define the density of liquid hydrogen, which is directly linked to trading interests. In this study, we developed and tested a liquid hydrogen temperature monitoring system that uses platinum resistance sensors with a nominal electrical resistance of approximately 1000 Ω at room temperature, PT-1000, for marine applications. The temperature measurements were carried out using a newly developed temperature monitoring system under different pressure conditions. The measured values are compared with a calibrated reference PT-1000 resistance thermometer. We confirm a measurement accuracy of ±50 mK in a pressure range of 0.1 MPa–0.5 MPa.     

Re-evaluation of the phase relationship between plutonium and zirconium dioxides

The phase relationship between ZrO₂ and PuO₂ was examined in a low PuO₂ content region, from 3.1 to 11.2 mol% PuO₂, at temperatures between 1273 K and 1473 K, by high temperature X-ray diffractometry. The measurements were carried out in air. At 1273 K, the samples in this composition range consisted of two phases, monoclinic and cubic. Another phase, tetragonal, was observed at 1373 K. The low temperature monoclinic phase disappeared at 1473 K. It was confirmed that the monoclinic phase disappears around 1463 K; the disappearance temperature does not depend on the composition of the sample. It was, thus, inferred that there should be a eutectoid line in the phase diagram. Though the eutectoid point is not clear, the PuO₂ content at the point should be less than 3.1 mol%.     

Role of protein kinase Cbeta in rhythmic contractions of human pregnant myometrium

To assess the role of protein kinase Cbeta (PKCbeta) in human myometrial contractions during pregnancy, we evaluated the effect of a PKCbeta inhibitor (LY333531) on the pregnant and nonpregnant myometrial contractions and compared the level of PKCbeta in the pregnant myometrium with that in the nonpregnant myometrium. The effects of LY333531 on the myometrial contractions were examined by measuring contractile activity (frequency and amplitude). PKCbeta in human myometrium was assessed at mRNA level using real-time PCR method. The characteristics of contractile activity were different between the pregnant and the nonpregnant myometrium. The amplitude of rhythmic contractions in the preterm and term myometrium was increased 2- to 2.5-fold when compared with that in the nonpregnant myometrium, but the frequency of rhythmic contractions was decreased by about half. LY333531 (10(-6) M) reduced the increased amplitude in the preterm and term myometrium by about 50%, and the inhibitory effects of LY333531 in the pregnant myometrium were significantly greater than that in the nonpregnant myometrium (about 50 vs 25%). However, the frequency in the pregnant and nonpregnant myometrium was not influenced by LY333531. Real-time PCR revealed a significant, five- to sevenfold increase in the expression of PKCbeta mRNA in the preterm and term myometrium when compared with the nonpregnant myometrium. These findings suggest that the increased amplitude of human myometrial contractions during pregnancy is related to the increased level of PKCbeta. A PKCbeta inhibitor may reduce preterm uterine contractions and prevent preterm delivery.     

Strain selection and scale-up fermentation for FR901379 acylase production by Streptomyces sp. no. 6907

Micafungin (FK463) is a widely used treatment for life-threatening, deep-seated fungal infections. It is an echinocandin-like lipopeptide derived from the chemical modification of deacylated FR901379, a type of lipopeptide antibiotic produced by Coleophoma empetri F-11899. The palmitoyl moiety of FR901379 is deacylated by FR901379 acylase produced by Streptomyces sp. no. 6907. In this study, our goal was to generate an improved strain of Streptomyces sp. no. 6907 capable of hyperproducing the FR901379-acylase enzyme. To accomplish this goal, modified strains of Streptomyces sp. no. 6907 were generated using UV-irradiation mutagenesis, and strain selection was performed using an agar-plate screening method to efficiently select an acylase-hyperproducing strain. Three marker indices were shown to correlate with elevated acylase production: decreased candidacidal activity of FR901379, decreased proteolytic activity on skim milk, and phenotypic characteristics. Cloning and subsequent sequencing of the acylase gene from the hyperproducing mutant revealed no mutations in either the acylase structural gene or the 5'-flanking region required for gene expression. The growth medium was also modified to maximize acylase production. We successfully increased acylase activity approximately 65-fold, compared with the original growth conditions (wild strain cultured in the original unmodified medium). To minimize formation of excess foam during the fermentation process, we optimized the parameters of agitation speed, as calculated from the discharge flow rate. Using our improved strain and the optimized medium and growth conditions, we have developed an improved and highly reproducible method for stable large-scale production of FR901379-acylase.     

Effects of pH and temperature on the deposition properties of stannate chemical conversion coatings formed by the potentiostatic technique on AZ91 D magnesium alloy

The effects of pH and temperature of a stannate bath on the quality of stannate chemical conversion coatings formed on AZ91 D magnesium alloy by using the potentiostatic polarization technique at E = −1.1 V were investigated in order to improve uniformity and corrosion protection performance of the coating films. It was found that the uniformity and corrosion resistance of coating films deposited by potentiostatic polarization were closely associated with pH and temperature of the coating bath. The pH and temperature to obtain the best coating film were investigated as a function of corrosion protection performance evaluated by curves of potentiodynamic anodic polarization conducted in borate buffer solution. Scanning electron microscope observation and electrochemical corrosion tests of the stannate-coated samples confirmed significant improvement in uniformity and corrosion resistivity of coating films deposited by the potentiostatic technique by modifying the pH and temperature of the coating bath. It was also found that uniformity and corrosion resistivity of the coating films deposited by the potentiostatic technique were considerably improved compared to those of coatings deposited by the simple immersion method at the best conditions of pH and temperature of the coating bath.     

Gas permeation properties of a composite membrane filled with poly(ethylene oxide) into a porous membrane

The permeability coefficients of O₂, N₂, and CO₂ gases at 25°C were examined for composite membranes that were prepared by filling poly(ethylene oxide)(PEO) with different molecular weights into a porous membrane. The permeability coefficients of O₂, N₂, and CO₂ were 2 × 10⁻¹⁰ – 4 × 10⁻¹⁰, 5 × 10⁻¹¹ – 9.5 × 10⁻¹¹, and 6 × 10⁻¹⁰ – 1 × 10⁻⁹ (cm³ STPcm/cm² s cmHg), respectively. The higher permeability coefficients of CO₂ are explained in terms of high solubility of CO₂ in filled PEO. The permeability coefficient of CO₂ was affected by the degree of crystallinity of PEO in the composite. On the other hand, there was little effect of crystallinity on O₂ and N₂ permeability coefficients. Some probable relationships between selectivities of O₂ to N₂ and CO₂ to N₂ and the degree of crystallinity of PEO were observed. The CO₂ gas permeability coefficients of the composite membrane for PEO50000 (M_w = 5 × 10⁴) showed a marked change due to melting or crystallization of PEO. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 73: 2733–2738, 1999     

Preparation of Pt-loaded TiO2 nanofibers by electrospinning and their application for WGS reactions

Preparation of Pt-loaded TiO₂ nanofibers and their catalytic performance for water gas shift (WGS) reactions have been explained in this work. The Pt-loaded TiO₂ nanofibers were obtained by electrospinning poly-ethylene oxide (PEO) aqueous solutions containing Ti(OH)_n slurry and Pt nanoparticles at room temperature, followed by calcination at 773 K for 4 h. The calcined nanofibers were rougher than the nanofibers of PEO/Ti(OH)_n/Pt due to the PEO degradation and oxidation of Ti(OH)_n to TiO₂. Diameters of the Pt-loaded TiO₂ nanofibers ranged between 200 and 900 nm. Catalytic activity of the Pt-loaded TiO₂ nanofibers for water gas shift (WGS) reactions was evaluated and it was observed that their activity was 5–7 times higher than that of a bulk catalyst. Such improvement is attributed to the larger surface area of the nanofiber catalyst compared to that of the bulk catalyst. To the best of our knowledge, this is the first demonstration of a synthesis of Pt-loaded TiO₂ nanofibers from a Ti(OH)_n nanoparticle slurry using electrospinning and its application to WGS reactions.     

SWAN: A distributed knowledge infrastructure for Alzheimer disease research

SWAN – a Semantic Web Application in Neuromedicine – is a project to develop an effective, integrated scientific knowledge infrastructure for Alzheimer Disease (AD) researchers, enabled by Semantic Web technology and deployed on Alzforum (www.alzforum.org), a scientific web community for AD research. This infrastructure may later be deployed for research communities in other neuromedical disorders. SWAN incorporates the full biomedical research knowledge lifecycle in its ontological model, including support for personal data organization, hypothesis generation, experimentation, lab data organization, and digital pre-publication collaboration. Community, laboratory, and personal digital resources may all be organized and interconnected using SWAN's common semantic framework.     

Effects of scatter and attenuation correction on quantitative assessment of regional cerebral blood flow with SPECT

The pyruvate dehydrogenase complex (PDC) plays a key role in the anaerobic mitochondrial metabolism of the parasitic nematode Ascaris suum. A cDNA coding for an A. suum pyruvate dehydrogenase kinase (APDK) has been cloned and sequenced from poly(A)+ RNA isolated from adult A. suum muscle.2 APDK exhibited significant sequence identity to mammalian PDKs. Nucleotide sequence analysis of the APDK cDNA revealed a 22-nucleotide spliced leader, characteristic of many nematode mRNAs, a 5'-UTR of 6 nucleotides, an open reading frame of 1197 nucleotides, and a 3'-UTR of 101 nucleotides that included a putative polyadenylation signal. The open reading frame predicted a protein of 399 amino acids with a molecular weight of 45,402 that included a putative 18-aminoacid leader peptide. Recombinant APDK (rAPDK) was functionally expressed in Escherichia coli with a his tag at its N-terminus and purified to apparent homogeneity on Ni-NTA-agarose. Recombinant APDK was a dimer and was not autophosphorylated and its activity was stimulated in the presence of APDK-deficient adult A. suum muscle PDC presumably by the binding of APDK to the dihydrolipoyl transacetylase (E2) core of the complex. After binding to the core, rAPDK activity was stimulated by elevated NADH/NAD+ and acetyl CoA/CoA ratios within the same ranges as observed for the native APDK. Immunoblotting suggested that native APDK focused as a series of 43-kDa spots (pI 6.1-6.8) on two-dimensional gels of the purified adult A. suum muscle PDC.