Analysis of thermal diffusivity of Ti thin film by thermoreflectance and periodic heating technique

Thermal diffusivity of Ti thin film with several hundred nanometers thickness has been measured by means of thermoreflectance (TR) technique and periodic heating using front heating and front detection configuration. Ti thin films were prepared on Si substrates by dc sputtering method. Then thin Mo layers as reflection layers were coated on Ti thin films. Surface of the Mo layer is irradiated by sinusoidally intensity modulated heating laser. Temperature response at the heated area is measured by a probe laser beam with constant intensity, as a TR signal. Phase lag between the phase of TR signal and that of heating laser beam was obtained from 100 kHz to 2.6 MHz. To analyze thermal diffusivity of Ti thin films using the phase lag data, we developed a three-layer analytical model such as Mo coating (100 nm)∕thin film∕semi-infinite substrate. The calculated phase lag using analytical model is in good agreement with the experimental data for the whole frequency range. The thermal diffusivity of two Ti thin films is determined to be 5 × 10(-6) m(2)∕s, which is 53% of the bulk one.     

An Investigation of Titanium Nitride Prepared by a DC Arc Plasma Jet

The properties of a titanium nitride film prepared by a DC arc plasma jet were investigated by microscopic observations, composition analysis, and hardness measurements. Scanning electron microscopy showed that the film was composed of three phases, designated the A, B, and C regions from the outer surface. The existence of three regions was also supported by composition analysis and hardness measurements on the cross section. XRD patterns showed the presence of -TiN in the A region. In the B region, a number of voids were observed, which have never been reported in previous papers. These were made up from specific crystallographic surfaces. The C region also had a few voids which were somewhat different from those in the B region. In the matrix, an acicular texture was found and identified as -Ti solid solution by XRD. The cross section of the film changed the color determined by the nitrogen content.     

Solution‐Processed Silicane Field‐Effect Transistor: Operation Due to Stacking Defects on the Channel

2D silicon nanomaterials have unique potential for use in applications owing to their many different exotic electronic properties. Field‐effect transistors are fabricated based on free‐standing silicanes through a solution process. Owing to the sensitive surface and the nanometer thickness, the devices require the use of fabrication conditions similar to those of lithium‐ion batteries to prevent oxidation of the sheets. Reliable transistor performance is observed at room temperature in a channel thinner than 3 nm, as drain voltage dependent transfer curves current modulation, depending on the edge effect of the silicane, although the transistor property is modest (hole mobility of 1.8 cm² V^?1 s^?1). The results suggest the feasibility of other air‐sensitive 2D nanomaterials for applications in nanoelectronic devices.     

Topology optimization of density type for a linear elastic body by using the second derivative of a KS function with respect to von Mises stress

This study demonstrates the use of Newton method to solve topology optimization problems of density type for linear elastic bodies to minimize the maximum von Mises stress. We use the Kreisselmeier–Steinhauser (KS) function with respect to von Mises stress as a cost function to avoid the non-differentiability of the maximum von Mises stress. For the design variable, we use a function defined in the domain of a linear elastic body with no restriction on the range and assume that a density is given by a sigmoid function of the function of design variable. The main aim of this study involves evaluating the second derivative of the KS function with respect to variation of the design variable and to propose an iterative scheme based on an H¹ Newton method as opposed to the H¹ gradient method that was presented in previous studies. The effectiveness of the scheme is demonstrated by numerical results for several linear elastic problems. The numerical results show that the speed of the proposed H¹ Newton method exceeds that of the H¹ gradient method.     

Reworkable adhesives composed of photoresponsive azobenzene polymer for glass substrates

ABSTRACT

A reversible isothermal phase transition between the liquid and solid states in response to light irradiation was achieved in side chain-type azobenzene polymers. These materials can be used as adhesives that are detachable without applying any mechanical and thermal stress but also repeatedly reworkable because of their photoinduced liquefaction and solidification properties. The adhesive strength to glass plates was more than 3 MPa in single lap shear tests. This value is three times higher than previously reported and is sufficiently strong for glass substrates.     

Development of a method to lower recontamination after chemical decontamination by depositing Pt nano particles: (I) Consideration of the suppression mechanism using a quantum dynamics calculation

The Pt coating (Pt-C) process has been developed to lower the recontamination by radioactive elements after chemical decontamination of piping surfaces. In this process, a layer of fine Pt nano particles is formed in an aqueous solution on the base metal of the piping following the chemical decontamination. In this study, we confirmed that the suppression effect by the Pt-C toward ⁶⁰Co deposition on type 316 stainless steel using a ⁶⁰Co deposition test under hydrogen water chemistry. Furthermore, we investigated the suppression mechanism of deposition of radioactive elements by a quantum molecular simulation. The deposition amounts of ⁶⁰Co which were incorporated in oxides after 1000 h with and without the Pt-C process were about 90 and 10.2 Bq/cm², respectively. The amount of ⁶⁰Co deposition with Pt-C is about 10% that of non-coated specimens. The ⁶⁰Co incorporation for the Pt-C specimen was suppressed by decreasing the formation of oxides. We considered this phenomenon using a quantum dynamics calculation and concluded that the Fe–O bonds in oxides were weakened by the effect of Pt and hydrogen radicals which were produced in the reaction between H₂ and Pt, and then oxides were dissolved into the water.     

Noise distribution of Mueller matrices retrieved with active rotating polarimeters

Two methods used to retrieve Mueller matrices from intensity measurements are revisited. It is shown that with symmetry or orthogonality considerations, numerical inversions of polarimetric equations can be avoided. With the obtained analytical formulas, noise propagation can be analyzed. If the intensity noise is a Gaussian white noise, the noise of Mueller matrices features remarkable properties. Mueller components are mutually correlated according to a scheme that involves decomposition into four blocks of 2x2 matrices. Variances are unequally distributed: the middle 2x2 block has the highest variance, the element on the bottom right has the lowest. These characteristics have been validated on experimental Mueller images of the free space.     

Culture characteristics of carotenoid-producing filamentous fungus T-1, and carotenoid production

The culture characteristics, carotenoid production, and associated biosynthetic pathway of strain T-1 were examined. As a result of examining the culture temperature and light irradiation, an increase of neurosporaxanthin and neurosporaxanthin beta-D-glucopyranoside was observed at a low temperature and 0 lx. It was suggested that highly polar carotenoids, such as neurosporaxanthin, and carotenoid glycosides were involved in the stabilization of membrane during nutrition storage other than the defense function of fungus bodies. Strain T-1 produced lycopene, beta-carotene, gamma-carotene, torulene, neurosporaxanthin, and neurosporaxanthin beta-D-glucopyranoside, as assessed by HPLC, LC-MS, and NMR analysis. Carotenoid biosynthesis begins with neurosporene, passing to lycopene and gamma-carotene through cyclization, and produces beta-carotene. In addition, it is saturated, gamma-carotene is converted to torulene, and neurosporaxanthin is produced. Thus, the carotenoid biosynthetic pathway in strain T-1 was estimated.     

New water-soluble metal working fluids additives from phosphonic acid derivatives for aluminum alloy materials

Water-soluble metal working fluids are used for processing of aluminum alloy materials. This short paper describes properties of new additives for water-soluble cutting fluids for aluminum alloy materials. Some alkyldiphosphonic acids were prepared with known method. Amine salts of these phosphonic acids showed anti-corrosion property for aluminum alloy materials. However, they have no hard water tolerance. Monoesters of octylphosphonic acid were prepared by the reaction of octylphosphonic acid dichloride with various alcohols in the presence of triethylamine. Amine salts of monoester of octylphosphonic acid with diethyleneglycol monomethyl ether, ethyleneglycol monomethyl ether and triethyleneglycol monomethyl ether showed both of a good anti-corrosion property for aluminum alloy materials and hard water tolerance.     

Distance measurement between Tyr10 and Met35 in amyloid beta by site-directed spin-labeling ESR spectroscopy: implications for the stronger neurotoxicity of Abeta42 than Abeta40

The neurotoxicity of the 42-mer and 40-mer amyloid beta peptides (Abeta42 and Abeta40) is closely related to the radicalization at both Tyr10 and Met35. Abeta42 is more neurotoxic than Abeta40. Our previous structural analyses of Abeta42 suggested that Tyr10 and Met35 are brought closer together by the turn at positions 22 and 23, and the S-oxidized radical cation at position 35, which is the ultimate toxic radical species, can be produced effectively through oxidation by the phenoxy radical at position 10. To verify this idea, their separation was measured by site-directed spin labeling (MTSSL) by using ESR spectroscopy. Among the three kinds of Abeta42 derivatives, which are doubly or singly spin-labeled at position 10 and 35, only 10,35-MTSSL-Abeta42 showed a clear dipole coupling in continuous-wave ESR; this suggests that the intramolecular spin labels at position 10 and 35 in Abeta42 are located within approximately 15 A. In contrast, 10,35-MTSSL-Abeta40 did not give such signals. The distance between Tyr10 and Met35 in 10,35-MTSSL-Abeta40, which was successfully measured by pulsed ESR spectroscopy was 30 A long. The difference in the distance between Abeta42 and Abeta40 could explain in part the stronger neurotoxicity of Abeta42 compared to Abeta40.