Morphological evolution and mechanical property enhancement of natural rubber/polypropylene blend through compatibilization by nanoclay

Nanocomposites of natural rubber (NR)/polypropylene (PP) (80/20 wt %) blends filled with 5 phr pristine clay were prepared by melt‐mixing process. Effects of clay incorporation technique via conventional melt‐mixing (CV) and masterbatch mixing (MB) methods on nanostructure and properties of the blend nanocomposites were investigated. The XRD, SAXS, WAXD, and TEM results showed that the clays in the NR/PP blend nanocomposites were presented in different states of dispersion and were locally existed at the interface between NR and PP as well as dispersed in the NR matrix. The presence of clay caused unique morphological evolution such as fine fibrillar PP domains. The tensile strength was improved over the unfilled NR/PP blends by 53% and 224%, and the storage modulus at 25 °C was increased by 78% and 120% for the NR/PP/clay nanocomposites prepared by CV and MB methods, respectively. Significant improvement in both properties was particularly obtained from the MB method due to finer dispersion fibrillar PP phase in the NR matrix and stronger interfacial adhesion between NR and PP fibers, as suggested from DMA. The oil resistance of blend nanocomposites was also improved over that of the unfilled NR/PP blend, and this property was further progressed by the masterbatch mixing method. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44574.     

Modification and laboratory evaluation of a TSI ultrafine condensation particle counter (Model 3776) for airborne measurements

A butanol-type ultrafine condensation particle counter (UCPC, Model 3776, TSI, Inc., Shoreview, MN, USA), which can achieve a 50% detection efficiency diameter (d₅₀) of 2.5 nm using a capillary-sheath structure, was modified and tested in the laboratory for airborne measurements. The aerosol flow rate through the capillary is a key factor affecting the quantification of aerosol particle number concentrations. A pressure-dependent correction factor for the aerosol flow rate was determined using a newly added mass flow meter for the sheath flow and the external calibration system. The effect of particle coincidence in the optical sensing volume was evaluated using an aerosol electrometer (AE, Model 3068B, TSI, Inc.) as a reference. An additional correction factor for the coincidence effect was derived to improve the quantification accuracy at higher concentrations. The particle detection efficiency relative to the AE was measured for mobility diameters of 3.1–50 nm and inlet absolute pressures of 101–40 kPa. The pressure dependence of the d₅₀ value, asymptotic detection efficiency, and shape of the particle detection efficiency curve is discussed, along with simple theoretical calculations for the diffusion loss of particles and the butanol saturation ratio in the condenser.

© 2017 American Association for Aerosol Science     

Aerosol-to-liquid collection: A method for making aqueous suspension of hydrophobic nanomaterial without adding dispersant

This article introduces an aerosol-based technique to make aqueous suspension of hydrophobic nanomaterial without adding dispersant. The method is intended for making a test-sample for evaluating the toxicities of nanomaterial by intra-tracheal administration. The method can wet the surface of hydrophobic nanomaterial within a few seconds. After the wetting process five to ten minutes of sonication assisted with manual stirring can fully disperse the hydrophobic nanomaterials in water. Two types of TiO₂ nanomaterial were used in this study; Tayca JMT-150IB whose surfaces are coated with negatively charged hydrophobic functional group, and P25 whose surfaces are naturally hydrophilic. Nanomaterials are aerosolized by a dry-method and become micrometer-sized agglomerates. Then supersaturated water vapor is condensed onto these airborne agglomerates by using a growth tube collector. The collected suspension (CS) of hydrophobic nanomaterial (JMT-150IB) is prepared in two steps; airborne agglomerates are collected onto a flat surface then transferred to liquid-water and subsequently sonicated for complete dispersion. This method works equally well for making the CS of hydrophilic nanomaterial. Size distribution measurements of the CS show that airborne agglomerates of TiO₂ dissociate into smaller units of agglomerates once they are captured into water, and the sizes of the agglomerates are in the nanometer to sub-micrometer range. Light scattering technique is used to show that a short sonication process can reproduce the particle number concentration of the CS after long storage.

Copyright © 2017 American Association for Aerosol Research     

A [meso-tetrakis(4-sulfonatophenyl)porphyrinato]zinc(ii) complex as an oral therapeutic for the treatment of type 2 diabetic KKA(y) mice

We prepared and characterized [meso-tetrakis(4-sulfonatophenyl)porphyrinato]zinc(II) ([Zn(tpps)]), and investigated its in vitro insulin-mimetic activity and in vivo hypoglycemic effect in type 2 diabetic KKA(y) mice. The results were compared with those of previously proposed insulin-mimetic zinc(II) complexes and zinc sulfate (ZnSO(4)). The in vitro insulin-mimetic activity of [Zn(tpps)] was considerably better than that of bis(allixinato)zinc(II) ([Zn(alx)(2)]), bis(maltolato)zinc(II) ([Zn(mal)(2)]), bis(2-aminomethylpyridinato)zinc(II) ([Zn(2-ampy)(2)](2+)), and ZnSO(4). In particular, the order of in vitro insulin-mimetic activity of the complexes was determined to be: [Zn(tpps)]>[Zn(alx)(2)]>[Zn(mal)(2)]>[Zn(2-ampy)](2+)>ZnSO(4). [Zn(tpps)] normalized the hyperglycemia of KKA(y) mice within 21 days when administered orally at doses of 10-20 mg (0.15-0.31 mmol) Zn per kg body mass for 28 days. In addition, metabolic syndromes such as insulin resistance, the degree of renal disturbance, and the degree of liver disturbance were significantly improved in [Zn(tpps)]-treated KKA(y) mice relative to those administered with saline and ZnSO(4). The improvement in diabetes was validated by the results of oral glucose-tolerance tests and the decrease in the HbA(1c) level observed. In contrast, ZnSO(4) and the ligand H(2)tpps did not lower the elevated blood glucose level under the same experimental conditions. Based on these observations, [Zn(tpps)] is proposed to be the first orally active zinc(II)-porphyrin complex for the efficacious treatment of not only type 2 diabetes but also metabolic syndromes in animals.     

Design Considerations and Performance Evaluation of a Compact Aerosol Particle Mass Analyzer

A compact aerosol particle mass analyzer (APM) of which the size of the classifier was significantly reduced than that of the first commercial model (Kanomax Model 3600) was developed. Firstly, requirements for desired performance in classifying particle mass were set forth. Secondly, a theoretical framework for the design parameters of an APM that satisfies the requirements was formulated. Thirdly, the design parameters were determined that satisfies the requirements while reducing the instrument size. The requirements include the condition that the classification range covers from 0.001 to 1000 fg (approximately 12 to 1200 nm in size for spherical particles having the density of 1 g/cm³), and the condition that both the classification resolution and particle penetration in this mass range are higher than certain specified values. A prototype having the design parameters determined according to this theoretical framework was constructed, and its performance was evaluated experimentally. The external dimensions of the electrodes of the compact APM are approximately 140 mm in length and 60 mm in diameter. It was confirmed that the performance of the compact APM operated at the aerosol flow rate of 0.3 L/min was comparable to that of the Model 3600 APM operated at 1 L/min. Because of the reduced size and of the resultant improved portability, it is expected that the compact APM is readily applicable to field measurements.

Copyright 2013 American Association for Aerosol Research     

A study of autonomous reactive power control method for distributed power generators to maintain power quality of the grid

Distributed power generators, such as cogenerators and renewable energy systems, have continued to advance and their penetration capacity is increasing. However, they may cause power quality problems in voltage regulation because of the reverse power flow. At present, when the distribution line voltage exceeds the limit value, distributed generators control reactive power to reduce the voltage, and if the reactive power output is not enough, they reduce the active power output. Therefore, an imbalance of active power output between distributed generators may occur because the voltage of generators varies by location and generators at lower voltage locations do not control the reactive power. A power control method for distributed generators needs to be established to solve these problems. In this study, an autonomous reactive power control method of sharing reactive power between distributed generators is proposed. The availability of this method is discussed experimentally and its applicability area is considered analytically by use of a model distribution system. © 2006 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Study on shock wave and turbulent boundary layer interactions in a square duct at Mach 2 and 4

In this paper, the outline of the Mach 4 supersonic wind tunnel for the investigation of the supersonic internal flows in ducts was firstly described. Secondly, the location, structure and characteristics of the Mach 2 and Mach 4 pseudo-shock waves in a square duct were investigated by color schlieren photographs and duct wall pressure fluctuation measurements. Finally, the wall shear stress distributions on the side, top and bottom walls of the square duct with the Mach 4 pseudo-shock wave were investigated qualitatively by the shear stress-sensitive liquid crystal visualization method. The side wall boundary layer separation region under the first shock is narrow near the top wall, while the side wall boundary layer separation region under the first shock is very wide near the bottom wall.     

SnO-SnO2 modified two-dimensional MXene Ti3C2Tx for acetone gas sensor working at room temperature

Acetone,as widely used reagents in industry and laboratories,are extremely harmful to the human.So the detection of acetone gas concentrations and leaks in special environments at room temperature is essential.Herein,the nanocomposite combining SnO-SnO2 (p-n junction) and Ti3C2Tx MXene was successfully synthesized by a one-step hydrothermal method.Because of the existence of a small amount of oxygen during the hydrothermal conditions,part of the p-type SnO was oxidized to n-type SnO2,forming in-situ p-n junctions on the surface of SnO.The hamburger-like SnO-SnO2/Ti3C2Tx sensor exhibited improved acetone gas sensing response of 12.1 (Rg/Ra) at room temperature,which were nearly 11 and 4 times higher than those of pristine Ti3C2Tx and pristine SnO-SnO2,respectively.Moreover,it expressed a short recovery time (9 s) and outstanding reproducibility.Because of the different work functions,the Schottky barrier was formed between the SnO and the Ti3C2Tx nanosheets,acting as a hole accumulation layer (HALs) between Ti3C2Tx and tin oxides.Herein,the sensing mechanism based on the formation of hetero-junctions and high conductivity of the metallic phase of Ti3C2Tx MXene in SnO-SnO2/Ti3C2Tx sensors was discussed in detail.     

Expanding the Toolbox of Upconversion Nanoparticles for In Vivo Optogenetics and Neuromodulation

Optogenetics is an optical technique that exploits visible light for selective neuromodulation with spatio‐temporal precision. Despite enormous effort, the effective stimulation of targeted neurons, which are located in deeper structures of the nervous system, by visible light, remains a technical challenge. Compared to visible light, near‐infrared illumination offers a higher depth of tissue penetration owing to a lower degree of light attenuation. Herein, an overview of advances in developing new modalities for neural circuitry modulation utilizing upconversion‐nanoparticle‐mediated optogenetics is presented. These developments have led to minimally invasive optical stimulation and inhibition of neurons with substantially improved selectivity, sensitivity, and spatial resolution. The focus is to provide a comprehensive review of the mechanistic basis for evaluating upconversion parameters, which will be useful in designing, executing, and reporting optogenetic experiments.