Thermodynamic properties for the quaternary system H2O + CH3OH + LiBr + ZnCl2

The thermodynamic properties (solubility, vapour pressure, density, viscosity, heat capacity and heat of mixing) of the H₂O + CH₃OH + LiBr + ZnCl₂ (9:1 H₂O:CH₃OH and 1:1 LiBr:ZnCl₂ by mass) system using H₂O + CH₃OH as the working media and LiBr + ZnCl₂ as the absorbents were measured. The solubility data were obtained in the temperature range from 270.35 to 389.55 K. The measurements of vapour pressure, density, viscosity and heat capacity were carried out at various temperatures and absorbent concentrations. The differential heat of dilution and differential heat of solution at 298.15 K were measured for solutionw with absorbent concentrations from 0 to 75.2 wt%. The integral heat of mixing data at 298.15 K were obtained from both sets of experimental data. The integral heats of mixing for this quaternary system showed exothermic behaviour. The vapour pressure data were correlated with an Antoine-type equation. An empirical formula for the heat capacity was obtained from experimental data. The experimental data for the basic thermodynamic properties of this quaternary system were compared with those of the basic H₂O + LiBr system.     

3He Melting Pressure Measurements in High Magnetic Fields

Experimental methods and preliminary results of high-precision measurements of the ³ He melting curve in high magnetic fields have been described. The purpose of this work is twofold. One is to establish a reliable millikelvin temperature scale in high fields (T 10 mK, B 15 T), The other is to investigate a high field region of the magnetic phase diagram of solid ³ He by measuring the melting pressure down to temperatures below 1 mK. Besides the two superfluid transitions, the phase transition temperatures between the spin ordered solid and the paramagnetic solid, T _HFP , were determined at B = 12 and 10 T with good accuracy, which is an extension of previous measurements up to 8 T. The present T _HFP (B) line can not be scaled to that at a higher density with a single Grüneisen parameter, indicating a variation of density dependencies of the multiple-spin exchange interactions.     

Studies of 2D Cryocrystals by STM Techniques

Scanning tunneling microscopy (STM) studies of two-dimensional (2D) cryocrystals ⁴ He, Kr, Xe) physisorbed on graphite surfaces are presented. Individual helium atoms, usually thought to be invisible with STM, were recently observed on graphite surfaces at a density corresponding to the commensurate solid. Here we show that a local elastic deformation seems to be the principal mechanism responsible to render the atoms visible. Recent tight-binding calculations of the local density of states (LDOS) of graphite which predict the appearance of an energy gap support this picture. I-z curve measurements for the case of ⁴ He show a sharp drop (increase) of the tunneling current I at a certain tip-surface distance z during retraction (approach) of the tip. This drop (increase) may be associated with the tunneling of a single He adatom, opening new possibilities to study the quantum tunneling of atoms via STM.     

Development of systems reliability analysis code SECOM-2 for seismic PSA

An integrated code system SECOM-2, developed at the Japan Atomic Energy Research Institute (JAERI), has the following functions for systems reliability analysis in seismic probabilistic safety assessments (PSAs): (1) calculation of component failure probability, (2) extraction of minimal cut sets (MCSs) from a given fault tree (FT), (3) calculation of frequencies of accident sequences and core damage, (4) importance analysis with several measures with consideration of unique parameters of seismic PSAs, (5) sensitivity analysis, and (6) uncertainty analysis. This paper summarizes the special features of SECOM-2 to perform the analyses mentioned above. At JAERI, using an integrated FT which represents seismically induced core damage due to all initiating events as a system model to calculate core damage frequency of a nuclear power plant, SECOM-2 can calculate conditional point estimate probabilities of system failures, losses of safety functions, and core damage as a function of earthquake motions. The point estimate is computed by a method which gives an exact numerical solution using the Boolean arithmetic model method. As for consideration of correlation of component failure, which has been an important issue in seismic PSAs, a new technique based on direct FT quantification by a Monte Carlo simulation is being added to SECOM-2. Adding this technique, the core damage frequency can be calculated not only with the upper bound approximation based on MCSs but also with a near exact solution taking into account the correlation among all components. This paper also presents the preliminary results of a seismic PSA of a generic BWR plant in Japan performed at JAERI to demonstrate the functions of the SECOM-2 code.     

IL-12 promotes the adhesion of NK cells to endothelial selectins under flow conditions

This study examined the adhesive interactions of peripheral blood NK cells with P- and E-selectin and analyzed the effect of IL-12 on the binding of NK cells to these selectins. P-selectin glycoprotein ligand-1 (PSGL-1) is expressed on most resting and IL-12-activated NK cells. However, the percentage of resting NK cells bound to P-selectin-IgG was 15%, and that of activated NK cells bound to P-selectin-IgG was 65%. Furthermore, the number of IL-12-activated NK cells bound to P-selectin-transfected Chinese hamster ovary cells was significantly higher than that of resting NK cells under flow conditions. These interactions were abolished by the incubation of these NK cells with anti-PSGL-1 (PL-1) mAb. Thus, PSGL-1/P-selectin interaction is important in the binding of resting and activated NK cells to P-selectin. NK cells express sialyl-Lewis(x) (sLe(x)) structure recognized by anti-sLe(x) mAb (KM-93), and IL-12 activation of NK cells increased the mean fluorescence intensity of KM-93-reactive NK cells. Adhesion of IL-12-activated NK cells to E-selectin-transfected Chinese hamster ovary cells was stronger than that of resting NK cells under flow conditions. These interactions were reduced markedly by incubation with anti-sLe(x) mAb. Thus, sLe(x) is the major ligand of resting and activated NK cells for E-selectin. These findings indicate that IL-12 stimulation of NK cells promotes their adhesion activity to endothelial selectins.     

Enantiomeric determination of amines by high-performance liquid chromatography using chiral fluorescent derivatization reagents

BACKGROUND: Despite increased awareness of risk factors, wound complications continue to be a problem following coronary artery bypass graft (CABG) surgery. A minimally invasive alternative was therefore developed to reduce the risk of complications while providing the same benefits as the standard open vein harvest procedure. METHODS: Video-assisted endoscopic technique for vein harvest was introduced in our medical center in October 1996. The procedure was evaluated and compared with the standard open vein harvest procedure. With the endoscopic technique, small incisions were made, each about 2-3 cm at the selected access sites (groin and above and below the knee). An endopath subcutaneous dissector was subsequently inserted along the anterior surface of the saphenous vein with the assistance of an endoscope and video monitor. The venous side branches were detected and positioned using a vessel dissector. A ligaclip was applied and the branches were divided using endopath-scissors. In some cases, the venous branches were divided directly using the endopath-scissors. Therefore, the distal and proximal ends of the saphenous vein were isolated, ligated and divided. The harvested veins were used for CABG. Each patient was evaluated for length of surgery, hospital stay and morbidity. RESULTS: From October 1996 through May 1997, we performed 50 procedures using video-assisted endoscopic vein harvest. The results were compared with those from 106 patients who underwent standard open vein harvest during the same period. The rate of complications was 2% in the endoscopic group compared with 13.2% in the open group (p < 0.05). The average hospital stay was 7.2 days in the endoscopic group and 11.5 days in the open group (p < 0.05). Twelve weeks after the operation, all of the incisions healed with good cosmetic results in the endoscopic group. However, long visible scars were found in the patients in the open group. CONCLUSIONS: Endoscopic saphenous vein harvest provides a minimally invasive alternative to open vein harvest. It provides good cosmetic results without a hypertrophic scar and enables the patient to regain early ambulation.