Sintering mechanism of low-temperature co-fired alumina featuring superior thermal conductivity

Densely sintered alumina is produced with a 5 wt% addition of a CuO-TiO₂-Nb₂O₅-Ag₂O sintering aid under a firing temperature of only 835°C with a prolonged holding time of 96 hours. The sintered material exhibits a thermal conductivity of 20 W/mK, which is significantly greater than that of conventional low-temperature co-fired ceramic (LTCC) materials (~2-7 W/mK). Additionally, suitable dielectric characteristics are observed, such as a relative dielectric constant ε_r of 11.3, quality factor–resonant frequency product Q × f of 4700 GHz, and temperature coefficient of resonant frequency τ_f of −87 ppm/K. The low-temperature densification is revealed to occur mainly in the solid state, before liquid phase formation. Lattice constant measurements, transmission electron microscopy, and energy dispersive spectroscopy reveal an increase in unit cell volume upon densification and the incorporation of Cu²⁺ and Ti⁴⁺ ions into the alumina lattice, which promotes densification. The diffusion speeds of Cu²⁺ and Ti⁴⁺ ions are indirectly affected by Nb and Ag atoms by lowering the additive melting temperature. Therefore, sintering additives with low melting points and elements that incorporate into the lattice of the base material are effective for low-temperature sintering of aluminum-based oxides.     

Exploiting Supramolecular Interactions from Polymeric Colloids for Strong Anisotropic Adhesion between Solid Surfaces

Adhesion occurs by covalent bonding, as in reactive structural adhesives, or through noncovalent interactions, which are nearly ubiquitous in nature. A classic example of the latter is gecko feet, where hierarchical features enhance friction across the contact area. Biomimicry of such structured adhesion is regularly achieved by top-down lithography, which allows for direction-dependent detachment. However, bottom-up approaches remain elusive given the scarcity of building blocks that yield strong, cohesive, self-assembly across multiple length scales. Herein, an exception is introduced, namely, aqueous dispersions of cellulose nanocrystals (CNCs) that form superstructured, adherent layers between solid surfaces upon confined evaporation-induced self-assembly (C-EISA). The inherently strong CNCs (E_A > 140 GPa) align into rigid, nematically ordered lamellae across multiple length scales as a result of the stresses associated with confined evaporation. This long-range order produces remarkable anisotropic adhesive strength when comparing in-plane (≈7 MPa) and out-of-plane (≤0.08 MPa) directions. These adhesive attributes, resulting from self-assembly, substantially outperform previous biomimetic adhesives obtained by top-down microfabrication (dry adhesives, friction driven), and represent a unique fluid (aqueous)-based system with significant anisotropy of adhesion. By using C-EISA, new emergent properties will be closely tied with the nature of colloids and their hierarchical assemblies.     

Measurement of pancreatic blood flow to prevent pancreatic juice leakage after pancreas-preserving total gastrectomy for gastric cancer

Disintegration apparatus according to P.Ph was adepted to measure the disintegration rate of tablets. The data obtained for 10 batches of aminophenazone tablets with different content of gelatine (2-20%) showed that there is a linear correlation between the area under non-disintegrated tablets mass curves (AUDC) and the area under release curves (AURC) described by equation: AUDC = bcr AURC - acr.     

Effect of 5-hydroxytryptamine on bioelectric properties of airway epithelial cells in culture

Waardenburg syndrome type 1 is caused by mutations in PAX3. Over 50 human PAX3 mutations that lead to hearing, craniofacial, limb, and pigmentation anomalies have been identified. A PAX3 mutant allele, segregating in a family, can show reduced penetrance and variable expressivity that cannot be explained by the nature of the mutation alone. The Mus musculus Pax3 mutation Spd (Splotch-delayed, Pax3Spd), coisogenic on the C57BL/6J (B6) genetic background, produces in heterozygotes a white belly spot with 100% penetrance and very few other anomalies. By contrast, many Spd/+ BC1 progeny [F1 female Spd/+ (female Spd/+ B6 x male +/+ Mus spretus) x male +/+ B6] exhibit highly variable craniofacial and pigmentary anomalies. Of the BC1 Spd/+ progeny, 23.9% are estimated to be nonviable, and 32.1% are nonpenetrant for the white belly spot. The penetrance and expressivity of the Spd/+ genotype are controlled in part by the genetic background and the sex of the individual. A minimum of two genes interact with Spd to influence the craniofacial features of these mice. One of these genes may be either X-linked or sex-influenced, while the other is autosomal. The A-locus (Agouti) or a gene closely linked to A also plays a role in determining craniofacial features. At least one additional gene, possibly the A-locus or a gene linked to A, interacts with Spd and determines the presence and size of the white belly spot. The viability of BC1 mice is influenced by at least three factors: Spd, A-locus alleles or a gene closely linked to the A-locus, and the sex of the mouse. These BC1 mice provide an opportunity to identify genes that interact with and modify the expression of Pax3 and serve as a model to identify the genes that modify the expression of human PAX3 mutations.