Distributions of density and fission products in the reaction product between irradiated MOX fuel and molten zircaloy-2

Two- and three-dimensional images were obtained by X-ray CT in the reaction product between zircaloy-2 cladding tube and MOX fuel. The gamma-ray intensity distributions in the same specimen were also obtained by gamma-ray measurements of two fission products (Cs-137 and Eu-154) and one neutron-activated nuclide (Co-60). The average values of the fuel density (about 10.5 g/cm³) and the cladding density (about 6.55 g/cm³) were obtained in the metallic phase region by evaluation of the density distributions on two-dimensional X-ray CT images. The distributions of the crushed fuel pellet and the pores were also clearly observed in the three-dimensional X-ray CT images. The following results were found from the gamma-ray measurement. First, Cs-137 was observed in the unreacted fuel region and the pore region in the metallic phase region. Second, Eu-154 was widely distributed to all regions. Finally, Co-60 was confirmed only in the metallic phase region.     

Benchmarking of the 3-D CAD-based Discrete Ordinates code “ATTILA” for dose rate calculations against experiments and Monte Carlo calculations

Shutdown dose rate (SDDR) inside and around the diagnostics ports of ITER is performed at PPPL/UCLA using the 3-D, FEM, Discrete Ordinates code, ATTILA, along with its updated FORNAX transmutation/decay gamma library. Other ITER partners assess SDDR using codes based on the Monte Carlo (MC) approach (e.g. MCNP code) for transport calculation and the radioactivity inventory code FISPACT or other equivalent decay data libraries for dose rate assessment. To reveal the range of discrepancies in the results obtained by various analysts, an extensive experimental and calculation benchmarking effort has been undertaken to validate the capability of ATTILA for dose rate assessment. On the experimental validation front, the comparison was performed using the measured data from two SDDR experiments performed at the FNG facility, Italy. Comparison was made to the experimental data and to MC results obtained by other analysts. On the calculation validation front, the ATTILA's predictions were compared to other results at key locations inside a calculation benchmark whose configuration duplicates an upper diagnostics port plug (UPP) in ITER. Both serial and parallel version of ATTILA-7.1.0 are used in the PPPL/UCLA analysis performed with FENDL-2.1/FORNAX databases. In the FNG 1st experimental, it was shown that ATTILA's dose rates are largely over estimated (by ～30–60%) with the ANSI/ANS-6.1.1 flux-to-dose factors whereas the ICRP-74 factors give better agreement (10–20%) with the experimental data and with the MC results at all cooling times. In the 2nd experiment, there is an under estimation in SDDR calculated by both MCNP and ATTILA based on ANSI/ANS-6.1.1 for cooling times up to ～4 days after irradiation. Thereafter, an over estimation is observed (～5–10% with MCNP and ～10–15% with ATTILA). As for the calculation benchmark, the agreement is much better based on ICRP-74 1996 data. The divergence among all dose rate results at ～11 days cooling time is no more than 15% among all participants.     

Upgrading of X-ray CT technology for analyses of irradiated FBR MOX fuel

The X-ray CT technology previously developed by JAEA was upgraded. The shape of the X-ray source beam was changed from a circular shape to an elliptical one and the collimator slit width was decreased from 0.3 to 0.1 mm. The X-ray detector was improved by changing a CdWO₄ scintillator to a highly sensitive silicon semiconductor detector. The analysis code of X-ray CT image was revised with respect to the number of points by using two kinds of experimental results and taking into account the effects of crack existence and deviation of the central void position from the radial center of a fuel pellet. As a result, high resolution X-ray CT images could be obtained on the transverse cross section of irradiated fuel assemblies. The error of the dimensional measurement was improved from ±0.1 to ±0.03 mm by upgrading the instrument and revising the analysis code of X-ray CT image. The discriminating accuracy of density difference could be increased, and the low density region (undisturbed region) and high density region (equi-axial and columnar regions) in the X-ray CT image on the cross section of irradiated fuel could be discriminated from each other. The reliability of fuel performance analysis improves because a large number of PIE data can be collected, compared with the conventional destructive PIE.     

Parallel processing of steady‐state analysis for a power electronic system by PVM3

It is important to get a steady‐state operation of a power electronic circuit for its design. The shooting method, which is one of the steady‐state analysis methods, solves a boundary value condition which equates initial values to final values after one‐period transient. This paper proposes how to process the analysis in parallel by using a Parallel Virtual Machine (PVM3) system. In particular, the multiple shooting method (MSM) which divides the shooting time into subsections is suitable because it can parallel numerical processes for the divided shooting times by using multiple CPU units independently. This parallel method is applied to converter examples which are processes by PVM3. The computed results are investigated for their convergence and CPU times to check their parallel effects. According to the MSM algorithm, CPU times are reduced almost to one‐fifth by using five computer units from a PVM3 system example. © 2001 Scripta Technica, Electr Eng Jpn, 135(2): 69–76, 2001     

Free D-serine, D-aspartate and D-alanine in central nervous system and serum in mutant mice lacking D-amino acid oxidase

We have examined whether D-amino acid oxidase (DAO) regulates free D-serine content using mutant ddY/DAO- mice lacking DAO activity. We find that the content of D-serine in the serum and cerebellum of mutant mice is much higher than that of normal mice, whereas a slight but significant difference in the cerebral D-serine level is observed between the two strains. These results suggest that, although DAO may participate in the catabolism of D-serine in the cerebellum and periphery, there appears to be other mechanisms for catabolism of endogenous D-serine in the brain.     

The role of pyrophosphate in copper deposition from cupric pyrophosphate solutions

Cathodic polarization characteristics of copper was examined in cupric pyrophosphate solutions of different concentrations and temperatures. The structure and composition of the deposited copper was examined by scanning electron microscopy, X-ray diffraction, electron probe microanalysis and Auger electron spectroscopy. The polarization characteristics implied that the coverage of the electrode by adsorbed pyrophosphate ions decreases with increasing cathodic polarization and it becomes almost zero past a critical potential E_b of about ?0.75 V vs sce. E_b becomes more negative with increasing concentration of free pyrophosphate ions. As expected, pyrophosphate was incorporated at relatively high concentrations (0.05–0.07 wt% as P) in the deposits in the potential region I (E ? E_b) and at lower concentrations (ca. 0.02 wt%) in region II (E < E_b). Smooth deposits with random crystalline orientations were obtained in a part of region I for cd ? ca. 5 mA/cm². The rough deposits obtained outside this showed preferred (220) orientations as could be expected from the orientation theory. The smooth deposition in region I is due to the pyroposphate adsorption which inhibits the ordered deposition of copper.     

Nuclear reactor strategies: Sensitivity analysis of the Häfele — Manne model

In the March issue Professors Häfele and Manne described their linear programming model of the transition from fossil to nuclear fuels. The present authors report on the sensitivity analyses they have performed on this model.     

Detection of irradiated meat, fish and their products by measuring 2-alkylcyclobutanones levels after frozen storage

2-Alkylcyclobutanones, such as 2-dodecylcyclobutanone and 2-tetradecylcyclobutanone, were analyzed to assess the irradiation history of irradiated meats or fish, and cooked foods with irradiated ingredients, which had been stored frozen for up to one year. The purpose of the study was to show that irradiated meats could be detected even after having been stored in the distribution system. 2-Alkylcyclobutanones showed a small decrease in irradiated raw meats that had been stored frozen for one year. Cooked foods, such as pancake and fried chicken made with irradiated eggs and chicken, respectively, contained detectable levels of 2-alkylcyclobutanones after storage frozen for one year. The 2-alkylcyclobutanones became undetectable in highly dried samples, such as feed for lab animals, during the same period.     

Development of a quantitative real-time PCR method to enumerate total bacterial counts in ready-to-eat fruits and vegetables

A newly developed real-time PCR assay rapidly quantifies the total bacterial numbers in contaminated ready-to-eat vegetables and fruits compared with the standard plate count method. Primers targeting the rpoB gene, which encodes for the beta subunit of the bacterial RNA polymerase and which is common to most bacterial species, was used instead of the 16S rRNA gene, which has multiple copies and varies among bacterial species. A primer pair specific for rpoB was confirmed to amplify rpoB in a wide range of bacterial species after we assessed 49 strains isolated from five kinds of fruits and vegetables. We purchased fruits and vegetables from retail shops and enumerated the bacteria associated with them by use of real-time PCR and compared this to the number found by the culture method. We found a high correlation between the threshold PCR cycle number when compared with the plate count culture number. The real-time PCR assay developed in this study can enumerate the dominant bacterial species in ready-to-eat fruits and vegetables.