Hematopoietic–Mesenchymal Signals Regulate the Properties of Mesenchymal Stem Cells

It is well known that the properties of hematopoietic stem/progenitor cells (HSCs), such as their self-renewal ability and multipotency, are maintained through interactions with mesenchymal stem/stromal cells (MSCs). MSCs are rare cells that are present in the bone marrow and are useful for clinical applications due to their functional ability. To obtain the necessary number of cells, MSCs must be cultured to expand, but this causes a remarkable decrease in stem cell properties, such as multipotency and proliferation ability. In this study, we show that the c-Mpl signal, which is related to the maintenance of hematopoietic stem cells, has an important effect on the proliferation and differentiation ability of MSCs. Utilizing a co-culture system comprising MSCs and HSCs, it is suggested that signaling from hematopoietic cells to MSCs supports cell proliferation. Interestingly, the enhanced proliferation ability of the HSCs was decreased in c-Mpl knock-out HSCs (c-Mpl-KO). In addition, the MSCs co-cultured with c-Mpl-KO HSCs had reduced MSC marker expression (PDGFRa and Sca-1) compared to the MSCs co-cultured with c-Mpl-wild-type HSCs. These results suggest that a hematopoietic–mesenchymal signal exists, and that the state of the HSCs is important for the stability of MSC properties.     

Effects of Sampling Tube Geometry on Soft Clayey Sample Quality Evaluated by Nondestructive Methods

Sample disturbance caused by difference in sampling tube geometry was evaluated by two nondestructive methods: the measurement of the residual effective stress (p_r') by ceramic disc; and the use of the bender element to ascertain the shear wave velocity (V_s), and thus the maximum shear modulus (G_BE). Samples were measured under atmosphere, i.e., not under confined stress conditions. The soil samples were obtained from two sources: reconstituted Kasaoka clay prepared in the laboratory, and at the test site at Takuhoku, Hokkaido, Japan. Samplers with different geometrical designs, referring to the Japanese standard stationary piston sampler, were used for the model ground and field sampling. The geometrical effects of the sampling tube, for example, the thickness of the tube wall, the edge angle, and the existence of a piston were carefully examined. The quality of the samples taken with different samplers was evaluated by p_r' and G_BE, values which were normalized by the in situ vertical effective stress (σ'_vo) and G_f measured by the seismic cone test in the field. It was found from these studies that p_r'/σ'_vo and G_BE/G_f vary considerably due to the geometry of the sampler, with the edge angle of sampling tubes being the most important feature in obtaining high quality samples. The wall thickness, and thus, the area ratio of the sampler is not critical to the sample quality if the edge angle is sharp enough. The existence of the piston does not significantly influence the sample quality in field samples. Furthermore, the correlation between G_BE and p_r' was also investigated, and it was found that the two parameters are strongly dependent.     

分子谱线参数测量新方法

介绍了一种利用F-P腔透射峰宽度测量分子谱线参数的新方法,论文从多光束干涉叠加原理出发,推导出有样品气体吸收的F-P腔的透过率函数,F-P腔的透过率是样品气体吸收线型的函数,随着样品吸收的增加,F-P腔透射条纹宽度增加.实验测量得到的谱线强度与HITRAN2004数据库数据、谱线宽度与理论计算结果很好地一致.     

Explanation of impact load curve in ball impact test in relation to thermal aging

Solder joints are required to have high impact strength for use in portable electronic products. To make solder joints with high impact strength, qualitative evaluation methods of impact strength are required. Ball impact tests have been widely adopted in evaluating the impact strength of solder joints because of their easy implementation. Impact load curves obtained from ball impact tests are used as an evaluation indicator of impact strength of solder joint. However, a relation between fracture behavior and impact load curve has not yet been clarified, and an explanation of the impact load curve has not yet been provided in detail. In addition to this, detailed study about the relation between IMC layer thickness and impact strength has not been performed, although the IMC layer thickness formed at the interface would significantly affect the impact strength of the solder joint. This study aimed to explain the impact load curve in the ball impact test and to reveal the effect of the IMC layer thickness on the impact strength of the solder joint. Sn–3.0Ag–0.5Cu solder was reflowed on an electroless Ni–P plated Cu substrate (Ni–P), and a ball impact test was then carried out to evaluate the impact strength. This study found that the ball impact test is effective to evaluate the interfacial strength of solder joints. In the impact load curve, it is estimated that the solder bump keeps deforming until the interfacial crack initiates (maximum load), and the interfacial crack initiates after the maximum load and propagates along the interface between the solder and Ni–P. The suitable evaluation of impact strength became possible by measuring the correspondence relation between the deformation distance of the solder bump after fracture and the energy until maximum load and the relation between the area fraction of the residual solder on the fractured pad and the energy after maximum load. And, it is proved that the impact strength decreased with increasing aging time because the growth of the IMC layer remarkably degraded the interfacial strength of the solder joint.     

General reconstruction theory for multislice X-ray computed tomography with a gantry tilt

This paper discusses image reconstruction with a tilted gantry in multislice computed tomography (CT) with helical (spiral) data acquisition. The reconstruction problem with gantry tilt is shown to be transformable into the problem of reconstructing a virtual object from multislice CT data with no gantry tilt, for which various algorithms exist in the literature. The virtual object is related to the real object by a simple affine transformation that transforms the tilted helical trajectory of the X-ray source into a nontilted helix, and the real object can be computed from the virtual object using one-dimensional interpolation. However, the interpolation may be skipped since the reconstruction of the virtual object on a Cartesian grid provides directly nondistorted images of the real object on slices parallel to the tilted plane of the gantry. The theory is first presented without any specification of the detector geometry, then applied to the curved detector geometry of third-generation CT scanners with the use of Katsevich's formula for example. Results from computer-simulated data of the FORBILD thorax phantom are given in support of the theory.     

浸没式光刻的优势和可行性

浸没式光刻通过高折射率的液体充入透镜底部和片子之间的空间使光学系统的数值孔径具有显著的优势。在193nm曝光系统中,水(折射率为1.44)被选作最佳的浸入液体。通过成像模拟,现已证明ArF穴193nm雪浸没式光刻(NA=1.05～1.23)与F2穴157nm雪干法穴NA=0.85～0.93雪光刻具有几乎相同的成像性能。结合流体力学和热模拟结果,讨论了ArF浸没式曝光设备的优势和可行性。     

The computed characteristics of turbulent flow and convection in concentric circular annuli. Part IV: Generalizations

This is the concluding portion of a four-part numerical investigation. The first was limited to the prediction of the velocity field, a prerequisite for the prediction of convection. The second concerned the prediction of the Nusselt number for uniform heating on the inner wall only, and the third the prediction of the Nusselt numbers for most of the other thermal boundary conditions that occur in practice. Herein, generalized predictive equations are presented for all of these conditions. The number of such equations and coefficients is minimized by the use of superposition and generalized expressions for the dependence on Re and Pr, and to some extent on the aspect ratio.     

Design and fabrication of RESURF MOSFETs on 4H-SiC(0001), (112~0), and 6H-SiC(0001)

Design and fabrication of lateral SiC reduced surface field (RESURF) MOSFETs have been investigated. The doping concentration (dose) of the RESURF and lightly doped drain regions has been optimized to reduce the electric field crowding at the drain edge or in the gate oxide by using device simulation. The optimum oxidation condition depends on the polytype: N/sub 2/O oxidation at 1300/spl deg/C seems to be suitable for 4H-SiC, and dry O/sub 2/ oxidation at 1250/spl deg/C for 6H-SiC. The average inversion-channel mobility is 22, 78, and 68 cm/sup 2//Vs for 4H-SiC(0001), (112~0), and 6H-SiC(0001) MOSFETs, respectively. RESURF MOSFETs have been fabricated on 10-/spl mu/m-thick p-type 4H-SiC(0001), (112~0), and 6H-SiC(0001) epilayers with an acceptor concentration of 1/spl times/10/sup 16/ cm/sup -3/. A 6H-SiC(0001) RESURF MOSFET with a 3-/spl mu/m channel length exhibits a high breakdown voltage of 1620 V and an on-resistance of 234 m/spl Omega//spl middot/cm/sup 2/. A 4H-SiC(112~0) RESURF MOSFET shows the characteristics of 1230 V-138 m/spl Omega//spl middot/cm/sup 2/.     

Effects of bile acid feeding on hepatic deoxycholate 7α-hydroxylase activity in the hamster

In order to investigate the effects of bile acid feeding on hepatic microsomal deoxycholate 7α-hydroxylase activity, three different bile acids were administered (0.2% w/w in chow) to hamsters for two weeks. Deoxycholate 7α-hydroxylase activity was increased markedly by feeding of cholic acid (CA) and slightly by deoxycholic acid (DCA) Chenodeoxycholic acid (CDCA) had little effect on the enzyme activity. Feeding each of the bile acids significantly inhibited the activity of cholesterol 7α-hydroxylase in the order CDCA≥ DCA>CA. There was no correlation between deoxycholate 7α-hydroxylase activity and cholesterol 7α-hydroxylase activity. It is concluded that the activity of deoxycholate 7α-hydroxylase is up-regulated by feeding DCA and CA and that the mechanism seems to be different from that of cholesterol 7α-hydroxylase. The increased activity of hepatic deoxycholate 7α-hydroxylase by CA and DCA should be beneficial in minimizing the toxic effects of DCA in the hamster.     

Oxygen-permselectivity in new type polyorganosiloxanes with carboxyl group on the side chain

Summary Oxygen-permselectivity through polyorganosiloxanes with carboxyl group on the side chain is discussed in terms of the differences between the O₂, N₂ diffusion coefficients or their solubility coefficients. The oxygen-selectivity increases from 2 to 5 with the increase in the carboxyl component of the side chain. Especially the selectivity in the diffusion coefficient is found to more contribute to the oxygenpermselectivity in comparison with that of the solubility coefficient. But the permeation coefficient decreases with the permselectivity.This work was partially supported by a Grand-in-Aid from the Ministry of Education, Science and Culture, Japan.