Thermal strain of high strength polyethylene fiber in low temperature

High strength polyethylene fiber (Toyobo, Dyneema® fiber: hereinafter abbreviated to DF) has a negative thermal expansion coefficient. Relation between fiber structure and thermal strain of DF used as reinforcement of DF reinforced plastic (DFRP) for cryogenic use was investigated. The crystallinities and orientation angles of several kinds of polyethylene fibers having different modulus from 15 to 134Gpa (herein after abbreviated to DFs) were measured by NMR and X‐ray. We obtained the parameters of the mechanical series‐parallel model composed of crystal and amorphous by crystallinity and modulus. Thermal expansion coefficients of DFs were estimated by mechanical series‐parallel model. All DFs having different modulus showed negative thermal expansion coefficients in the temperature range from 180 to 300K, and absolute values of those markedly increased by increasing tensile modulus of DF. The estimated thermal expansion coefficients showed negative values, and thermal strains showed a similar curve to observed ones mostly. Average thermal expansion coefficients in the temperature range from 180 to 300K estimated by mechanical model agreed with the observed ones. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 2918–2925, 2004     

Structural analysis of cellulose triacetate polymorphs by two-dimensional solid-state C-C and H-C correlation NMR spectroscopies

For the elucidation of the crystal structures of the two crystalline allomorphs of cellulose triacetate (CTA), namely CTA I and CTA II, two-dimensional (2D) solid-state through-bond ¹³C-¹³C and ¹H-¹³C correlations NMR techniques applied to the two crystalline allomorphs of CTA. As a result, the ¹³C and ¹H chemical shifts of the glucopyranose ring of CTA I and CTA II were completely assigned by the 2D NMR spectra of these allomorphs. On the 2D ¹³C-¹³C correlation spectrum of CTA II, two sets of the ¹³C-¹³C correlations from C1 to C6 were observed. This indicated that the CP/MAS ¹³C NMR spectrum of CTA II can be characterized by its overlapping of the ¹³C subspectra of two kinds of 2,3,6-triacetyl-anhydroglucopyranose units and that there are two magnetically non-equivalent sites in the unit cell of CTA II. In the case of CTA I, the numbers of respective ¹³C and ¹H shifts of CTA I agreed with the those of the glucopyranose residue in the allomorph, strongly suggesting that the asymmetric unit of CTA I is only one glucose residue. In addition, conformational differences in the exocyclic C5-C6 bonds between CTA I and CTA II were strongly suggested by the notable differences in the ¹H and ¹³C chemical shifts at the C6 sites of these allomorphs.     

Study on the Anti-Coking Nature of Ni/SrTiO3 Catalysts by the CH4 Pyrolysis

A solid phase crystallization (spc) method was applied for the preparation of SrTiO₃-supported Ni catalysts and compared to the impregnation (imp) method. spc-Ni_0.2/SrTiO₃ has highly dispersed and stable Ni metal particles resulting in higher activity and higher sustainability against coking than imp-Ni_0.2/SrTiO₃ in the partial oxidation of CH₄. Both catalysts were tested for the CH₄ pyrolysis in order to elucidate the catalytic nature against coking of spc-Ni_0.2/SrTiO₃. The amount of carbon and the rate of H₂ formation were similar over both catalysts at both 773 and 1073 K. On both catalysts, CH₄ continuously decomposed at 773 K, while the rate of CH₄ pyrolysis quickly decreased at 1073 K. Fibrous carbons grew up with a Ni metal particle on the tip of the fiber at 773 K, while carbon balls and short carbon fibers with a Ni metal particle encapsulated inside formed and no sufficient growth of the fiber was observed at 1073 K. The carbon species formed at 773 K was hydrogenated completely to CH₄ around 873 K, while the hydrogenation of that formed at 1073 K needed higher temperature around 1073 K. However, the carbon species formed on both the catalysts at either 773 or 1073 K was completely oxidized around 773 K. Thus, judging from the anti-coking nature, the behaviors in the CH₄ pyrolysis are similar over both catalysts, nonetheless spc-Ni_0.2/SrTiO₃ was far superior to imp-Ni_0.2/SrTiO₃ in the CH₄ oxidation. It is likely that the high sustainability against coking of spc-Ni_0.2/SrTiO₃ is not due to its intrinsic nature suppressing the coking but due to its high activity of reforming which can quickly eliminate the carbon formed on the catalyst surface.     

EXPERIMENTAL STUDIES ON A NOVEL CHEMICAL HEAT PUMP DRYER USING A GAS-SOLID REACTION

The authors have been studying Chemical Heat Pumps (CHP) from the viewpoints of energy saving and environmental impact. The CHP can store thermal energy in the form of chemical energy by an endothermic reaction, and release it at various temperature levels during heat demand periods by exo/endothermic reactions. The authors have proposed in an earlier study a novel chemical heat pump (CHP) system for environmentally-friendly effective utilization of thermal energy in drying as a chemical heat pump dryer (CHPD). In this exploratory study, we test the effectiveness of operating the proposed CHPDs experimentally. Basic experiments on the CHPDs such as hot dry air production for convective drying are performed on lab-scale CHPD apparatuses using gas-solid reactions in calcium oxide/calcium hydroxide reactant beds. The proposed CHPDs are found to produce hot air by CHP operation for drying. The temperature levels of the produced hot air and the reaction rates/conversions are as good as in the case of hot water supply system using basically same CHP operation. The cold heat for air dehumidification is also found to be generated/recovered by the same CHPD system. The generated heat amounts can be increased by changing the operating conditions although the heat recovery must be enhanced for practical application of CHPDs.     

STD‐NMR‐Based Protein Engineering of the Unique Arylpropionate‐Racemase AMDase G74C

Structure‐guided protein engineering achieved a variant of the unique racemase AMDase G74C, with 40‐fold increased activity in the racemisation of several arylaliphatic carboxylic acids. Substrate binding during catalysis was investigated by saturation‐transfer‐difference NMR (STD‐NMR) spectroscopy. All atoms of the substrate showed interactions with the enzyme. STD‐NMR measurements revealed distinct nuclear Overhauser effects in experiments with and without molecular conversion. The spectroscopic analysis led to the identification of several amino acid residues whose substitutions increased the activity of G74C. Single amino acid exchanges increased the activity moderately; structure‐guided saturation mutagenesis yielded a quadruple mutant with a 40 times higher reaction rate. This study presents STD‐NMR as versatile tool for the analysis of enzyme–substrate interactions in catalytically competent systems and for the guidance of protein engineering.     

Hydrogen and carbon dioxide adsorption with tetra‐n‐butyl ammonium semi‐clathrate hydrates for gas separations

Gas adsorption rates of H₂, CO₂, and H₂‐CO₂ gas mixture (H₂/CO₂ = 3.4) with tetra‐n‐butyl ammonium salt (bromide, chloride, and fluoride) semi‐clathrate hydrate particles were measured at 269 K to assess their properties for gas separation. Equilibrium gas occupancies in the S‐cages of the particles were in order of (high to low) for hexagonal structure‐I, tetragonal structure‐I, and superlattice of cubic structure‐I structures with the maximum fractional occupancy by CO₂ being about 40%. The CO₂ diffusion rate depended on the anion size of the salt, which is attributed to distortion of the S‐cage that is close to the molecular size of CO₂. Simulations of semi‐clathrate hydrate particles with theory showed that H₂/CO₂ selectivities could be as high as 36 (3.0 mol% TBAF) and that selectivities for an ideal membrane (3.3 mol% TBAF) could be >100 (269 K, 0.3–4.5 MPa). Semi‐clathrate hydrates have wide application as separation media for gas mixtures. © 2014 American Institute of Chemical Engineers AIChE J, 61: 992–1003, 2015     

Energy value and digestibility of dietary oil containing mainly 1,3-diacylglycerol are similar to those of triacylglycerol

Diacylglycerol (DAG) is a component of various vegetable oils. Approximately 70% of the DAG in edible oils are in the configuration of 1,3-DAG. We recently showed that long-term ingestion of dietary oil containing mainly 1,3-DAG reduces body fat accumulation in humans as compared to triacylglycerol (TAG) oil with a similar fatty acid composition. As the first step to elucidate the mechanism for this result, we examined the difference in the bioavailabilities of both oils by measuring food energy values and digestibilities in rats. Energy values of the DAG oil and the TAG oil, measured by bomb calorimeter, were 38.9 and 39.6 kJ/g, respectively. Apparent digestibility expressed according to the formula: (absorbed) x (ingested)⁻¹x100=(ingested—excreted in feces)x(ingested)⁻¹x100 for the DAG oil and the TAG oil were 96.3±0.4 and 96.3±0.3% (mean±SEM), respectively. The similarity in the bioavailabilities of both oils supports the hypothesis that the reduced fat accumulation by dietary DAG is caused by the different metabolic fates after the absorption into the gastrointestinal epithelial cells.     

Assessing the kinetic model of hydro-distillation and chemical composition of Aquilaria malaccensis leaves essential oil

This study aimed to model the kinetic of hydro-distillation of Aquilaria malaccensis leaves oil in order to understand and optimize the extraction process. In addition, this study, for the first time, aimed to identify the chemical compositions of the A. malaccensis leave-oil. By assessing both first-order kinetic model and the model of simultaneous washing and diffusion, the result indicated that the model of simultaneous washing and diffusion better describes the hydro-distillation mechanism of the essential oil from A. malaccensis leaves.The optimum time, solid to liquid ratio, and the heating power for extracting the highest amount of essential oil were found to be around 3 h, 1:10(g·ml-1), and 300 W respectively. Yellow essential oil with a strong smell and a yield of 0.05 v/w was extracted by hydro-distillation Clevenger apparatus. Chemical compounds of the essential oil were analyzed using gas chromatography–mass spectroscopy(GC/MS), which resulted in identification of 42 compounds that constitute 93% of essential oil. Among the identified components,Pentadecanal(32.082%), 9-Octadecenal,(Z)(15.894%), and Tetradecanal(6.927%) were the major compounds.Considering the fact that all the identified major components possess pesticidal properties, A. malaccensis leaves can be regarded as a promising natural source for producing pesticides.     

Heterodimerization of Group I Ribozymes Enabling Exon Recombination through Pairs of Cooperative trans‐Splicing Reactions

Group I (GI) self‐splicing ribozymes are attractive tools for biotechnology and synthetic biology. Several trans‐splicing and related reactions based on GI ribozymes have been developed for the purpose of recombining their target mRNA sequences. By combining trans‐splicing systems with rational modular engineering of GI ribozymes it was possible to achieve more complex editing of target RNA sequences. In this study we have developed a cooperative trans‐splicing system through rational modular engineering with use of dimeric GI ribozymes derived from the Tetrahymena group I intron ribozyme. The resulting pairs of ribozymes exhibited catalytic activity depending on their selective dimerization. Rational modular redesign as performed in this study would facilitate the development of sophisticated regulation of double or multiple trans‐splicing reactions in a cooperative manner.