Effects of Sampling Tube Geometry on Soft Clayey Sample Quality Evaluated by Nondestructive Methods

Sample disturbance caused by difference in sampling tube geometry was evaluated by two nondestructive methods: the measurement of the residual effective stress (p_r') by ceramic disc; and the use of the bender element to ascertain the shear wave velocity (V_s), and thus the maximum shear modulus (G_BE). Samples were measured under atmosphere, i.e., not under confined stress conditions. The soil samples were obtained from two sources: reconstituted Kasaoka clay prepared in the laboratory, and at the test site at Takuhoku, Hokkaido, Japan. Samplers with different geometrical designs, referring to the Japanese standard stationary piston sampler, were used for the model ground and field sampling. The geometrical effects of the sampling tube, for example, the thickness of the tube wall, the edge angle, and the existence of a piston were carefully examined. The quality of the samples taken with different samplers was evaluated by p_r' and G_BE, values which were normalized by the in situ vertical effective stress (σ'_vo) and G_f measured by the seismic cone test in the field. It was found from these studies that p_r'/σ'_vo and G_BE/G_f vary considerably due to the geometry of the sampler, with the edge angle of sampling tubes being the most important feature in obtaining high quality samples. The wall thickness, and thus, the area ratio of the sampler is not critical to the sample quality if the edge angle is sharp enough. The existence of the piston does not significantly influence the sample quality in field samples. Furthermore, the correlation between G_BE and p_r' was also investigated, and it was found that the two parameters are strongly dependent.     

Navigation behavior based on self-organized spatial representation in hierarchical recurrent neural network

ABSTRACT

A cognitive map is an internal model of the external world and contains the spatial representation of the surrounding environment. The existence of the cognitive map was first identified in rats; rats can navigate to their desired destination using cognitive maps while dealing with environmental uncertainty. We performed a mobile robot navigation experiment where obstacles were randomly placed using hierarchical recurrent neural network (HRNN) with multiple timescales. The HRNN was trained to navigate the mobile robot to the destination indicated by a snapshot image. After the training, the HRNN was able to successfully avoid the obstacles and navigate to the destination from any location in the environment. Analysis of the internal states of the HRNN showed that the module with fast timescale handles obstacle avoidance and the one with slow timescale has spatial representation corresponding to the spatial position of the destination. Moreover, in the experiment wherein the novel path appeared, the trained HRNN performed shortcut behavior. The shortcut behavior shows that the HRNN performed navigation using the self-organized spatial representation in the slow recurrent neural network. This indicates that training of goal-oriented navigation, i.e. the navigation motivated by a snapshot image of the destination results in the self-organization of cognitive map-like representation.     

The structure solution of the F-type i-ZnMgHf from the X-ray diffraction

ABSTRACT

We report a successful growth of the ZnMgHf F-type icosahedral quasicrystal in the form of faceted single grains. By varying the heat treatment parameters we were able to obtain single crystals with a quality suitable for a single crystal X-ray diffraction which was conducted in a synchrotron facility. Ab initio structure solution by a charge flipping algorithm manifests the existence of two types of Bergman clusters. Clusters are differentiated by the preferential occupation of the high-symmetry positions by hafnium in a rhombic triacontahedron, being the outer shell of the atomic cluster.

This paper is part of a Thematic Issue on The Crystallographic Aspects of Metallic Alloys.     

Theory of electrostatics and electrokinetics of soft particles

We investigate theoretically the electrostatics and electrokinetics of a soft particle, i.e. a hard particle covered with an ion-penetrable surface layer of polyelectrolytes. The electric properties of soft particles in an electrolyte solution, which differ from those of hard particles, are essentially determined by the Donnan potential in the surface layer. In particular, the Donnan potential plays an essential role in the electrostatics and electrokinetics of soft particles. Furthermore, the concept of zeta potential, which is important in the electrokinetics of hard particles, loses its physical meaning in the electrokinetics of soft particles. In this review, we discuss the potential distribution around a soft particle, the electrostatic interaction between two soft particles, and the motion of a soft particle in an electric field.     

玻璃纤维/大麻纤维增强聚丙烯混杂复合材料的力学性能和断裂特征(英文)

目前在土木工程,建筑,汽车等领域里使用的复合材料中,玻璃纤维是用量最大的增强材料。由于保护地球环境的呼声日趋高涨,天然纤维被期待着代替源于石油而且再利用困难的玻璃纤维,成为绿色复合材料的必要材料之一。本文通过注射成型工艺制作了玻璃短纤维,大麻短纤维以及混杂型纤维增强复合材料,并在拉伸实验中应用两种不同频率的声发射技术检测了拉伸断裂特性。实验发现,随着大麻纤维的加入和混杂复合材料绿色度的增加,复合材料的拉伸弹性模量随之线性增大,而拉伸强度基本保持不变。当大麻纤维的含量超过20wt%的时候,拉伸强度开始降低。在不同频率的声发射实验中,混杂型复合材料的声发射事件的产生都比单一纤维增强型复合材料要来的晚,也就是说,纤维的混杂有助于推迟微裂纹的产生。     

The terminal protein of the linear DNA plasmid pGKL2 shares an N-terminal domain of the plasmid-encoded DNA polymerase

The 36K protein attached at the 5′ end of the linear DNA plasmid pGKL2 from the yeast Kluyveromyces lactis was first purified and characterized. The terminal protein was purified from cells (1 kg wet weight) by ammonium sulphate precipitation and two rounds of centrifugation to equilibrium in CsCl gradients. The pGKL2 was present only in the post-microsomal supernatant. Approximately 10 mg of the purified pGKL2 was recovered and digested with DNase I. The terminal protein (final ca. 0·8 mg) was homogeneous by electrophoresis and we determined the N-terminal amino acid sequence up to ten residues, showing that it existed in the cryptic N-terminal domain of pGKL2-ORF2 (DNA polymerase) sequence.     

Nucleotide sequences of alcohol acetyltransferase genes from lager brewing yeast,Saccharomyces carlsbergensis

The nucleotide sequences of alcohol acetyltransferase genes isolated from lager brewing yeast, Saccharomyces carlsbergensis have been determined. S. carlsbergensis has one ATF1 gene and another homologous gene, the Lg-ATF1 gene. There was a high degree of homology between the amino acid sequences deduced for the ATF1 protein and the Lg-ATF1 protein (75·7%), but the N-terminal region has a relatively low degree of homology. Southern analysis and contour-clamped homogeneous electric field analysis of Saccharomyces strains suggest that the ATF1 gene is located on chromosome XV in S. cerevisiae and that the Lg-ATF1 gene might originate from the ‘non-S. cerevisiae’ genome of S. carlsbergensis, which is similar to that of S. bayanus and S. pastorianus. The nucleotide sequence data reported in this paper will appear in the DDBJ, EMBL and GenBank data banks with the Accession Numbers D63449 (ATF1) and D63450 (Lg-ATF1).     

Generalized warpage parameter

A warpage index (Δψ_m) was introduced for studying warpage characteristics of a plastic part injection molded from PA66 compounded with 30 wt% glass fiber. Δψ_m is defined as Δψ_m = (Δψ_m)_max – (Δψ_m)_min, where ψ_m = ψ(θ)_max, where ψ(θ) = (ε(θ) – α(θ)ΔT)/| α(θ)ΔT|, where ε is the total strain, α is the linear thermal expansion coefficient, ΔT is temperature difference, and θ is the angle along which ε and α are calculated. Finite element analysis was used for calculating flow field in injection, fiber orientation, material anisotropy and warpage. ψ_m is calculated in each finite element, and Δψ_m is calculated in a whole finite element model. Δψ_m is a measure of the ratio of actual shrinkage to the amount of shrinkage that would occur if an element freely shrank. The characteristics of Δψ_m were studied. It has been found that warpage is null if Δψ_m = 0, but that null warpage generally does not indicate Δψ_m = 0. It is shown that Δψ_m quantitatively represents the warped and unwarped state. Δψ_m distinguishes the null warpage state with possible buckling from the null warpage state without possible buckling. It has been shown that material anisotropy is possibly described with Δψ_m, and that the cause of warpage is self-restrictive deformation in an injection molded part. It has been deduced that it is generally not possible to eliminate warpage only by controlling material properties. Δψ_m is obtainable for a plastic part with complex geometry and complex fiber orientation state, and for arbitrary materials. Applications of Δψ_m are left for future study.     

Therapeutic Targets and Emerging Treatments in Advanced Chondrosarcoma

Simple SummaryChondrosarcomas develop chemoresistance to standard anticancer drugs, making it difficult to control unresectable or metastatic chondrosarcomas. To improve the clinical outcomes of chondrosarcoma, new treatment approaches, such as molecule-targeting agents and immunotherapy, are needed. Recent research has revealed promising biomarkers and therapeutic targets for chondrosarcoma. In addition, several molecule-targeting agents have shown favorable antitumor activities in several clinical studies in patients with advanced sarcomas, including chondrosarcoma. This review summarizes recent basic studies on biomarkers and therapeutic targets and recent clinical studies on treating chondrosarcomas.AbstractDue to resistance to standard anticancer agents, it is difficult to control the disease progression in patients with metastatic or unresectable chondrosarcoma. Novel therapeutic approaches, such as molecule-targeting drugs and immunotherapy, are required to improve clinical outcomes in patients with advanced chondrosarcoma. Recent studies have suggested several promising biomarkers and therapeutic targets for chondrosarcoma, including IDH1/2 and COL2A1. Several molecule-targeting agents and immunotherapies have shown favorable antitumor activity in clinical studies in patients with advanced chondrosarcomas. This review summarizes recent basic studies on biomarkers and molecular targets and recent clinical studies on the treatment of chondrosarcomas.