Analytical Institutional Economics of Water and Environmental Conservation

Both President Peter Reynolds and Secretary General Glenn Stout attended the IWRA Regional Seminar on Water Quality and its Management in New Delhi, India on December 10–11, 1985. Over 100 members and fellow water scientists and administrators attended. Leading Indian water authorities participated in the program.

We reproduce here the inaugural address by Shri B. Shankaranand, Union Minister for Water Resources, and a summary of the Conclusions and Recommendations.     

Cold repeated forming of compact for aluminium foam

A cold repeated forming process of compacts for producing metal foams was developed in order to strongly bond powder particles. In this process, the compact undergoes severe plastic deformation for the strong bonding of particles by repeated backward extrusion and cup compression, and thus the compact largely foams owing to the accumulation of gas released from blowing agents inside the compact during heating. The cold repeated forming process without heating is much simpler than that for the conventional hot extrusion process. The relative density of the foam was decreased by adding silicon powder to the compact, and an aluminium foam having a relative density of 0.27 was obtained using two repeats of backward extrusion and cup compression, 1.5 mass% titanium hydride powder and 4 mass% silicon powder. In addition, a one-piece foam was successively produced from the bonding of two compacts during the foaming in a die. It was found that the cold repeated forming of compacts is effective for the production of metal foams.     

Arraying needle-like TiO2 particles in a composite film by applying ac bias and its transmittance anisotropy

In an effort to improve energy-efficient windows, we experimented with a precursor slurry composite by using needle-like TiO₂ particles as the filler in a urethane matrix. Applying dc bias to the slurry failed to array the needle-like particles in the composite and to deposit on the film surface because of electrophoretic movement. However, applying ac bias of ±5 V to the precursor slurry composite for 12 h resulted in the needle-like TiO₂ particles being arrayed in the composite in a direction normal to the film surface. This resulted in an improvement in the energy efficiency of the material through an angular dependence of transmittance in the visible–near-infrared range.     

Characteristics of creeping discharge developed in a narrow gap between insulators and effect of a backside electrode

Discharge characteristics have been investigated for a needle–plane electrode configuration containing insulating barriers with a narrow gap which has been placed between the needle and the plane. The characteristics of creeping discharge developed in the narrow gap of the barrier filled with SF₆ are especially considered. In the case of a configuration with a backside electrode below the needle, the corona generated from the needle easily extended to the gap. On the other hand, for a configuration without a backside electrode, the corona has hardly extended to the gap, and on increasing the applied voltage the corona developed greatly in the gap. This difference in corona extension should affect the flashover characteristics in the present system. © 2003 Wiley Periodicals, Inc. Electr Eng Jpn, 146(2): 27–36, 2004; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.10248     

A 60-GHz multilayer parasitic microstrip array antenna on LTCC substrate for system-on-package

This letter describes a compact and high-gain multilayer parasitic microstrip array antenna (MPMAA). The design and performance of the proposed array antenna are presented. The antenna employs three layers with a 2/spl times/2 parasitic array on each layer. The developed prototype MPMAA employs a multilayer low-temperature co-fired ceramic (LTCC) substrate that is well suited to the assembly of MMIC chips. The fabricated MPMAA achieves a 7.17 dBi absolute gain at 60 GHz including the loss derived from the feeding parts and RF probe to measure its antenna performance. The spacing of the top layer of the parasitic array constructed by 2/spl times/2 elements has a free-space wavelength of 0.36 and the chip size is 10 mm/sup 2/. The fabricated MPMAA achieves both compact and high directional gain and satisfies the requirements for a millimeter-wave system-on-package (SOP).     

T cell response to Borrelia garinii, Borrelia afzelii, and Borrelia japonica in various congenic mouse strains

The infectivity and T cell response to Borrelia garinii SIKA2, Borrelia afzelii BFOX, and Borrelia japonica 0612, the organisms that cause Lyme disease in Japan, were examined in various inbred and congenic strains of mice. Infectivity differed among the species: B. garinii SIKA2 and B. afzelii BFOX were each able to infect 90% to 100% of C3H/He mice; B. japonica 0612 was able to infect only 20% of C3H/He mice. The pattern of infectivity to various inbred and congenic strains of mice may influence the pathogenicity of the organism and the clinical signs of Lyme disease. Cross-reactivity between Borrelia antigens was observed, but there was no cross-reactivity between Borrelia antigens and Leptospira antigens. We evaluated the genetic control of the delayed-type hypersensitivity (DTH) reaction in the form of footpad swelling produced by Borrelia antigens using viable or sonicated bacteria as sensitization. Differences in strains of mice infected by viable antigen were observed. However, all strains of mice showed a strong DTH reaction using sonicated antigens without genetic background. A DTH reaction in the form of footpad swelling did not appear to be associated with genetic background. The footpad reaction was mediated by CD4+8- and Ia- T cells, as revealed by in vitro monoclonal antibody treatment. However, CD8+ T cells did not suppress footpad swelling. These results indicate that many antigenic epitopes of the Borrelia spirochete can stimulate the DTH reaction.     

Effect of Pore–Grain-Boundary Interactions on Discontinuous Grain Growth

Pore behavior as influenced by migration of an abnormal grain boundary was studied. The pore behavior during the discontinuous growth of hot-pressed spinel (MgAl₂O₄) — whether the pore can move attached to the grain boundary — is particularly governed by the pore size and the matrix grain size. These phenomena can be understood from the interaction between the pore and the abnormal grain boundary.     

New hot-carrier degradation mode in PMOSFETs with W gate electrodes

Hot-carrier degradation of W gate PMOSFETs, which are surface-channel devices because of the work function of W, has been investigated in comparison with polycide (WSi_x/n⁺ poly-Si) ones. In W gate PMOSFETs, transconductance g_m and threshold voltage V_th decrease on the drain avalanche hot-carrier (DAHC) stress, and Δg_m /g_m0 and ΔV_th become minimum at V_G≅V_D/2. By using the charge-pumping technique, it is found that, after stressing at the same stress condition, the interface state density of W gate devices is about 10 times larger than that of polycide ones but the densities of trapped electrons are almost equal. These results indicate that the difference of hot-carrier degradation between W and polycide gate devices is mainly caused by the difference of the interface state density     

Effects of monoclonal anti-c-kit antibody (ACK2) on melanocytes in newborn mice

Previous studies indicate that c-Kit is required for postnatal melanocyte development. To understand the precise mechanisms of c-Kit dependence, we studied melanocyte development in newborn C57BL/6 mice by means of peritoneal injection of a monoclonal anti-c-Kit antibody (ACK2), which blocks c-Kit functions. The mice were injected once or more with ACK2 at various intervals after birth. In experiment 1, skin samples were examined on day 10 post-partum and in experiment 2 they were examined daily until day 10 post-partum. We studied melanocytes in the hair follicles, epidermis, and dermis by light and electron microscopy with dopa reactions and immunohistochemistry. Epidermal melanocytes in untreated mice were dopa negative and c-Kit positive on day 0 post-partum but became dopa positive soon thereafter. In ACK2-treated mice, the earlier the mice received ACK2 injections after birth, the fewer melanocytes they had, not only in the epidermis, but also in follicles. In these mice, melanocytes that had undergone apoptosis in the dermis and the follicles were detected ultrastructurally. Some appeared to have produced tyrosinase, because they had dopa-positive melanosomes. These results suggest that melanocytes in newborn mice are c-Kit dependent and undergo apoptosis when c-Kit receptors are blocked by ACK2 in the early days after birth. During this c-Kit-dependent period, melanocytes differentiate from dopa negative to positive and migrate from the epidermis to hair follicles.