Recovery of fluorocarbons in Japan as a measure for abating global warming

The objective of this study is to evaluate the potential for recovering fluorocarbons as measures for the abatement of global warming. In this study, we focused on the three different kinds of fluorocarbons: CFCs, HCFCs and HFCs, and targeted refrigerant use because of the availability of relevant data. We first estimated future fluorocarbon emissions from the targeted appliances; we next compared those emissions in the units of CO₂ equivalent to the level of CO₂ emissions in 1990 from a quantitative point of view. As the result of this study, it was found that fluorocarbon emissions in 1999 and 2010 would be equal to approximately 7 and 3% of the level of CO₂ emissions in 1990 respectively. Moreover, if we implement a 100% recovery rate in every recovery route, we can reduce a large amount of emissions which correspond to approximately 2–5% of the level of CO₂ emissions in 1990, even if we take into account the energy-related CO₂ emissions by the transportation and decomposition of fluorocarbons.     

Assessing Environmental Risks: Lessons From Superfund

This essay analyzes the use of risk assessment in Superfund, the controversial American hazardous waste cleanup programme. We argue that risk assessment has been used in three ways in discussing policy options in this programme: as a metric for assessing performance; as a means for resolving conflicts; and as a tool for comparing different environmental initiatives. Use of risk reduction as an analytical tool in European efforts to clean up hazardous waste sites is discussed. We conclude that while risk assessment has potential utility for each of these applications, there are also accompanying technical and political difficulties.     

Preparation of SiC particles coated with alumina hydrate: Effect of reaction condition on particle coalescence

Alumina-hydrate-coated SiC particles were prepared via a homogeneous precipitation method using urea, and the conditions for uniform coating and less coalescence of the particles were investigated. Coalescence of coated particles could be said to occur by collision and agglomeration followed by deposition of alumina hydrate on the agglomerated particles. Coalescence of coated particles was suppressed by use of low reaction temperature, low concentration of aluminium sulfate, high concentration of urea, intensive stirring, and a flow reactor.     

Fuzzy inference and fuzzy inference processor

Fuzzy inference, a data processing method based on the fuzzy theory that has found wide use in the control field, is reviewed. Consumer electronics, which accounts for most current applications of this concept, does not require very high speeds. Although software running on a conventional microprocessor can perform these inferences, high-speed control applications require much greater speeds. A fuzzy inference date processor that operates at 200000 fuzzy logic inferences per second and features 12-b input and 16-b output resolution is described     

Use of a YAP1 overexpression cassette conferring specific resistance to cerulenin and cycloheximide as an efficient selectable marker in the yeast Saccharomyces cerevisiae.

Drug-resistance markers for yeast transformation are useful because they can be applied to strains without auxotrophic mutations. However, they are susceptible to technical difficulties, namely lower transformation efficiency and the appearance of drug-resistant mutants without the marker. To avoid these problems, we have constructed a phosphoglycerate kinase (PGK) promoter-driven YAP1 expression cassette, called PGKp-YAP1. Yeast cells containing PGKp-YAP1 were resistant to cycloheximide, a protein synthesis inhibitor, and also to cerulenin, a fatty acid synthesis inhibitor, but not to other drugs tested. The transformation efficiency of PGKp-YAP1 using cerulenin selection was comparable to that using a URA3 auxotrophic marker when low concentrations of cerulenin were used. Non-transformed drug-resistant colonies did appear on the low-concentration cerulenin plates. However, these non-transformed colonies could easily be identified, based on their cycloheximide sensitivity and/or their resistance to aureobasidin A to which the transformants were sensitive. Therefore, the dual drug resistance of PGKp-YAP1 could be used as an effective selection for PGKp-YAP1 recipient cells. The PGKp-YAP1 marker was used to disrupt the LYS2 gene and to transform an industrial yeast strain, indicating that this marker can be used for efficient and reliable gene manipulations in any Saccharomyces cerevisiae strain.     

Elastic, anelastic, and piezoelectric coefficients of langasite: resonance ultrasound spectroscopy with laser-Doppler interferometry

This paper presents advanced techniques to determine all independent elastic-stiffness coefficients C/sub ij/, the associated internal friction Q/sub ij//sup -1/, and piezoelectric coefficients e/sub ij/ of monocrystal langasite (La/sub 3/Ga/sub 5/SiO/sub 14/) using a single rectangular parallelepiped specimen. Langasite's crystal structure belongs to the trigonal system with point group 32, and thus possesses six independent C/sub ij/, two e/sub ij/, and two dielectric coefficients /spl epsiv//sub ij/. All of the elastic and piezoelectric coefficients affect the mechanical resonance frequencies of the solid specimen, and measuring them very accurately permits one to determine the C/sub ij/ and e/sub ij/ with known density, dimensions, and e/sub ij/. We developed a piezoelectric tripod to support the specimen upward and measured the free-vibration resonance frequencies with minimum load from its own weight. This weak and stable acoustic coupling ensures accuracy of the frequency measurement better than 10/sup -5/, enough to determine the coefficients reliably. Our C/sub ij/ fall in the range of results measured with previous (conventional) methods. Our e/sub 11/ is smaller than the reported values by 1.2-13%, and e/sub 14/ is larger by 44-97%. For the internal friction measurement, we used a solenoid coil to vibrate the specimen without any contact. The longitudinal-wave internal friction considerably exceeds the shear-wave internal friction, which can be explained by phonon-phonon interactions.     

ESD phenomena in GMR heads in the manufacturing process of HDD and GMR heads

It is well known that giant magnetoresistive (GMR) heads used for hard disk drives (HDD) are very sensitive to electrostatic discharge (ESD). In this paper, we describe a method of categorizing ESD damage modes from a standpoint of magnetic influences on the heads as observed by quasi-static test (QST) characteristics as well as electromagnetic characteristics like off-track profiles. In addition, we report an example of GMR stack interlayer diffusion which is one type of hard ESD damage. We also present an example of ESD damage that happened in an actual production process and its preventive measures as guidelines.     

Frequency control techniques in coherent multichannel LAN's

This paper describes frequency control techniques for cold start and channel recognition functions in coherent multichannel local area networks. A Z-cut quartz etalon can be used to stabilize the optical transmitter frequencies. The capture range and the influence of humidity on a Fabry-Perot etalon are discussed. The frequency deviation of the optical transmitter was estimated to be less than ±1 GHz in the long term. A double AFC loop has been proposed for local LD frequency control. It showed a wide capture range of ±100 GHz. Coherent FDM receiver switching to the desired channel was demonstrated over a range from 0 to 40°C in an experiment     

An instantaneous response CMOS optical receiver IC with widedynamic range and extremely high sensitivity using feed-forwardauto-bias adjustment

An instantaneous response CMOS optical-receiver IC is described with wide input dynamic range and high sensitivity. In a TCM (time compression multiplexing)-TDMA (time division multiple access) fiber-optic subscriber system, a receiver should be able to handle burst-data packets with different amplitude. This requires quick response and a wide dynamic range. Instantaneous response is achieved with a new feed-forward auto-bias adjustment technique. In addition, multistaged offset compensation provides a wide dynamic range without any external elements and adjustments. Using these design techniques, an optical receiver IC was fabricated in a standard 0.8-μm CMOS technology. The receiver has a wide dynamic range of more than 25 dB for burst-mode optical input at 29 Mb/s. It has high transimpedance gain of 150 dBΩ and high sensitivity of -42 dBm with stable operation for FET threshold voltage and power supply voltage fluctuation     

Vertical pneumatic conveying: An experimental study with particles in the intermediate and turbulent flow regimes

Vertical pneumatic conveying was studied in a 3-inch diameter riser 30 feet in length using solids ranging in particle Reynolds number from 100 to 3500. Particle to gas mass flow ratios varied from 0 to 8 and pipeline conditions extended from dilute flow down into the choking region. Average particle hold-up was determined by means of a series of quick-closing valves and particle slip velocity was often found to be greater than the calculated terminal velocity. The reasons for this are examined. Frictional pressure losses in the riser were also determined and compared with literature data. The phenomenon of choking is considered briefly.