Fabrication of silicon nitride nanoceramics—Powder preparation and sintering: A review

Fine-grained silicon nitride ceramics were investigated mainly for their high-strain-rate plasticity. The preparation and densification of fine silicon nitride powder were reviewed. Commercial sub-micrometer powder was used as raw powder in the “as-received” state and then used after being ground and undergoing classification operation. Chemical vapor deposition and plasma processes were used for fabricating nanopowder because a further reduction in grain size caused by grinding had limitations. More recently, nanopowder has also been obtained by high-energy milling. This process in principle is the same as conventional planetary milling. For densification, primarily hot pressing was performed, although a similar process known as spark plasma sintering (SPS) has also recently been used. One of the advantages of SPS is its high heating rate. The high heating rate is advantageous because it reduces sintering time, achieving densification without grain growth. We prepared silicon nitride nanopowder by high-energy milling and then obtained nanoceramics by densifying the nanopowder by SPS.     

Temperature-controlled triaxial compression/creep test device for thermodynamic properties of soft sedimentary rock and corresponding theoretical prediction

In deep geological disposal of high-level nuclear waste,one of the most important subjects is to estimate long-term stability and strength of host rock under high temperature conditions caused by radioactive decay of the waste.In this paper,some experimental researches on the thermo-mechanical characteristics of soft sedimentary rock have been presented.For this reason,a new temperature-controlled triaxial compression and creep test device,operated automatically by a computer-controlled system,whose control software has been developed by the authors,was developed to conduct the thermo-mechanical tests in different thermal loading paths,including an isothermal path.The new device is proved to be able to conduct typical thermo-mechanical element tests for soft rock.The test device and the related testing method were introduced in detail.Finally,some test results have been simulated with a thermo-elasto-viscoplastic model that was also developed by the authors.     

Effective thermal conductivity of compressed woods

Compression is one solution to improve the strength of softwoods. The effective thermal conductivities of compressed Japanese cedars (cryptomeria japonica), which were compressed in the radial direction of the wood, were measured. Both the effective thermal conductivities in the tangential and fiber directions increase proportionally to the density increment due to the compression. However, the thermal conductivity in the radial direction (compression direction) increases slightly with the density increment. Numerical computations were conducted to explain the characteristics of thermal conductivity in the radial direction by using a microscopic heat conduction model for the compressed wood. The numerical results were compared with the measured values. And the physical mechanism of the heat conduction in the compressed woods is discussed.     

Denatured-jacalin derivatives with selective recognition for O-linked glycosides (ST,T, Tn,and STn Type) on IgA1 hinge region

Immunoglobulin A1 (IgA1) concentration in the plasma of patients with IgA nephropathy (IgAN) as the cause of renal failure is higher than that in the plasma of normal controls. IgA1 with abnormal sugars is considered to deposit in the glomerular mesangium, aggravating nephritis in IgAN. Jacalin is a lectin that recognizes sugars on IgA1. However, its selective-recognition for normal-type (ST type, NeuAc-α(2,3)-Gal-β(1,3)-GalNAc) and abnormal-type (T type, Gal-β(1,3)-GalNAc; Tn type, GalNAc; STn type, NeuAc-α(2,6)-GalNAc) sugars α-O-linked to serine/threonine in IgA1 is weak. Therefore, jacalin cannot be used for recognizing specific sugar types on IgA1. We attempted to develop a new recognition method for specific sugar types on IgA1 by utilizing the multirecognition capability of jacalin. Its binding abilities were regulated by heat denaturation with suitable template sugar (galactose or N-acetylgalactosamine). Further, we successfully prepared denatured-jacalin derivatives, which recognized ST-/T-type sugars on IgA1, by sugar-immobilized affinity chromatography. Enzyme-linked immunosorbent assay of denatured-jacalin derivatives, showed the ratios of abnormal sugars on IgA1 in the plasma of IgAN patients and normal controls to be approximately 60% and 20%, respectively. The results proved that profiling of sugar types in IgAN can successfully be performed by solely using jacalin derivatives.     

Isolation of Solid Solution Phases in Size‐Controlled LixFePO4 at Room Temperature

State‐of‐the‐art LiFePO₄ technology has now opened the door for lithium ion batteries to take their place in large‐scale applications such as plug‐in hybrid vehicles. A high level of safety, significant cost reduction, and huge power generation are on the verge of being guaranteed for the most advanced energy storage system. The room‐temperature phase diagram is essential to understand the facile electrode reaction of Li_xFePO₄ (0 < x < 1), but it has not been fully understood. Here, intermediate solid solution phases close to x = 0 and x = 1 have been isolated at room temperature. Size‐dependent modification of the phase diagram, as well as the systematic variation of lattice parameters inside the solid‐solution compositional domain closely related to the electrochemical redox potential, are demonstrated. These experimental results reveal that the excess capacity that has been observed above and below the two‐phase equilibrium potential is largely due to the bulk solid solution, and thus support the size‐dependent miscibility gap model.     

Determination of free fatty acids in milk and dairy products by reversed-phase HPLC with fluorescence detection

A highly sensitive HPLC with fluorescence detection was developed for the determination of free fatty acids (FFAs) in milk and dairy products. For this purpose, the FFAs were extracted from small amounts of milk (1.0 mL), cheese (0.5 g) and butter (0.5 g) using Sep-Pak cartridge columns, and then derivatized to 9-anthrylmethyl esters with 9-anthryldiazomethane (ADAM). Good separations of the ADAM derivatives of 16 FFAs (C4-C18) that exist in milk, cheese and butter, which permitted quantitative estimation of their individual FFAs, were achieved by HPLC on a C18 column (Cadenza CD-C18, 150 x 3 mm i.d.) using gradient elution with methanol and water. The acid values calculated from the contents of individual FFAs were in good agreement with those obtained by the conventional titration method. These results demonstrate that the present HPLC method is simple, sensitive and precise, and could be utilized widely for determination of the FFAs in milk and dairy products.     

Acrobot control by learning the switching of multiple controllers

Reinforcement learning (RL) has been applied to constructing controllers for nonlinear systems in recent years. Since RL methods do not require an exact dynamics model of the controlled object, they have a higher flexibility and potential for adaptation to uncertain or nonstationary environments than methods based on traditional control theory. If the target system has a continuous state space whose dynamic characteristics are nonlinear, however, RL methods often suffer from unstable learning processes. For this reason, it is difficult to apply RL methods to control tasks in the real world. In order to overcome the disadvantage of RL methods, we propose an RL scheme combining multiple controllers, each of which is constructed based on traditional control theory. We then apply it to a swinging-up and stabilizing task of an acrobot with a limited torque, which is a typical but difficult task in the field of nonlinear control theory. Our simulation result showed that our method was able to realize stable learning and to achieve fairly good control.This work was presented, in part, at the 9th International Symposium on Artificial Life and Robotics, Oita, Japan, January 28–30, 2004     

2.4 Gbit/s repeaterless transmission over 306 kmnon-dispersion-shifted fibre using directly modulated DFB-LD anddispersion-compensating fibre

Based on system optimisation through theoretical model simulations, 2.4 Gbit/s repeaterless transmission over 306 km nondispersion-shifted fibre has been demonstrated with no power penalty, using a directly modulated DFB laser with a bulk active layer and dispersion-compensating fibres     

Cadherin-6 mediates the heterotypic interactions between the hemopoietic osteoclast cell lineage and stromal cells in a murine model of osteoclast differentiation

Osteoclasts are multinucleated cells of hemopoietic origin that are responsible for bone resorption during physiological bone remodeling and in a variety of bone diseases. Osteoclast development requires direct heterotypic cell-cell interactions of the hemopoietic osteoclast precursors with the neighboring osteoblast/stromal cells. However, the molecular mechanisms underlying these heterotypic interactions are poorly understood. We isolated cadherin-6 isoform, denoted cadherin-6/2 from a cDNA library of human osteoclast-like cells. The isolated cadherin-6/2 is 3,423 bp in size consisting of an open reading frame of 2,115 bp, which encodes 705 amino acids. This isoform lacks 85 amino acids between positions 333 and 418 and contains 9 different amino acids in the extracellular domain compared with the previously described cadherin-6. The human osteoclast-like cells also expressed another isoform denoted cadherin-6/1 together with the cadherin-6. Introduction of cadherin-6/2 into L-cells that showed no cell-cell contact caused evident morphological changes accompanied with tight cell-cell association, indicating the cadherin-6/2 we isolated here is functional. Moreover, expression of dominant-negative or antisense cadherin-6/2 construct in bone marrow-derived mouse stromal ST2 cells, which express only cadherin-6/2, markedly impaired their ability to support osteoclast formation in a mouse coculture model of osteoclastogenesis. Our results suggest that cadherin-6 may be a contributory molecule to the heterotypic interactions between the hemopoietic osteoclast cell lineage and osteoblast/bone marrow stromal cells required for the osteoclast differentiation. Since both osteoclasts and osteoblasts/bone marrow stromal cells are the primary cells controlling physiological bone remodeling, expression of cadherin-6 isoforms in these two cell types of different origin suggests a critical role of these molecules in the relationship of osteoclast precursors and cells of osteoblastic lineage within the bone microenvironment.