一种基于混沌渐近同步的数字保密通信方法

根据驱动－响应混沌同步原理，提出了一种基于混沌渐近同步的数字保密通信方法。通过设计对发射信号进行多级单值非线性变换，使得通过预测法的攻击完全失效，因而这种通信方法具有较高的抗破译能力。理论分析和数值模拟结果证实了本方法的正确性与有效性。     

正确区别教师的职业道德与违法行为

从师德和法律这两个不同的概念入手,剖析现实教学中存在的种种负面行为,这些行为中有违反 道德和违反法律之分.在加强师德教育的同时,应该加强法治教育,应该知道遵守法律是每个公民应尽的义 务,你首先是个好公民,你才可能是个好教师.从这个意义上说,加强师德教育,守法是基础.     

层序单元体系域划分及勘探意义

体系域是层序地层学理论体系中的重要概念，在隐蔽油气藏的勘探中，勘探家们极为重视低位体系域。但体系域的成因意义、是否有不同级别层序的体系域以及如何划分，在实际工作中认识不一致。结合勃海湾盆地的勘探实例，分析体系域的成因机制、组合特征和勘探规律，认为：体系域是基准面变化等因素作用的产物，不同级别的层序都发育着与其对应的体系域：一般情况下，三级层序对应的体系域单元与含油气层的规模相匹配，但四级层序对应的体系域才是隐蔽油气藏赋存的有利部位。图5参6。     

利用静电学和测量数据对碳纳米管膜场致发射规律的定量分析

碳纳米管膜的场致发射电流密度仅由它表面的宏观电场决定，无论其表面形状是平的还是半球状的。对于理想的平行板电极系统，其表面电场强度均匀（UId），发射电流密度、总电流与发射面积成正比：对于半球一平面电极系统半球形的阴极存在一个宏观场增强因子ks，一个与两极距离和球半径之比（d/r）相关的函数，其表面的平均场强为ks U/d。对于d/r=0，ks=1，d≥r的情况，ks接近于常数。对于10〈d／r〈100的情况，存在一个经验的表达式：ks=1＋0．15d/s=0．005（d／r）^2。在引入ks后，不同作者给出的平面电极系统和半球一平面电极系统碳纳米管膜的场致发射电流I与宏观表面电场强度E的关系都可以近似用-经验公式描述：I=a（E-Eo）^b，a，b为常数。该经验公式可为稳定生产的CNT膜片应用产品设计提供方便。     

改性乳化沥青的发展和应用概况

综述了改性乳化沥青的发展及应用概况,重点讨论了改性乳化沥青的生产、制备工艺、稳定性影响因素,并对国内外改性乳化沥青的应用情况加以概述。     

PLC控制电梯仿真模块设计

PLC这门课传统的实验方法是采用“平面型”的模块模仿生产流程,实验效果不理想。而采取教学仪器公司生产的仿真模块,具有“立体感”强的特点,实验效果好,但价格贵。针对这一情况,作者开发了几种价格低廉的仿真模块用于教学,取得了很好的效果,值得推广。本文介绍其中的4层电梯仿真模块的设计与实现。     

Routing Correlated Data with Fusion Cost in Wireless Sensor Networks

In this paper, we propose a routing algorithm called minimum fusion Steiner tree (MFST) for energy efficient data gathering with aggregation (fusion) in wireless sensor networks. Different from existing schemes, MFST not only optimizes over the data transmission cost, but also incorporates the cost for data fusion, which can be significant for emerging sensor networks with vectorial data and/or security requirements. By employing a randomized algorithm that allows fusion points to be chosen according to the nodes' data amounts, MFST achieves an approximation ratio of 5/4log(k + 1), where k denotes the number of source nodes, to the optimal solution for extremely general system setups, provided that fusion cost and data aggregation are nondecreasing against the total input data. Consequently, in contrast to algorithms that only excel in full or nonaggregation scenarios without considering fusion cost, MFST can thrive in a wide range of applications     

使用Monte Carlo方法对光子-物质的相互作用进行模拟

在医学影像获得方法中，核医学与传统的放射线探测，扫描仪探测，核磁共振相比，是唯一能获得器官功能性信息的方法，但它获得的图像质量不如其他方法。开发了一种图像探测仪并使用Monte Carlo方法对其各组成部分进行模拟从而可以通过调整参数来获得高分辨的图像。     

基于PCI总线的扫描电镜图像采集系统

图像采集系统是扫描电镜的一个重要组成部分，用于控制扫描电镜的扫描电源，视频图像采集，数字化与显示，电镜主控计算机与底层微机板的通讯和电镜照相，本图像采集系统基于PCI总线接口设计，硬件主要设计采用FPGA技术，实现了数字电路的模块化设计，集成度和灵活性高，目前，电镜图像卡已达到所要求的设计水平。     

Environmental factors and kinetics of microbial degradation of poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) in an aqueous medium

Environmental factors such as oxygen, temperature, and microbial species may have significant effects on decomposition of biodegradable polymers. A representative biodegradable, thermoplastic polymer, poly(3‐hydroxybutyrate‐co‐hydroxyvalerate) (PHBV), was decomposed in an aqueous medium under controlled laboratory conditions by soil microbes for the intrinsic degradation kinetics and the effects of the environmental factors on polymer biodegradation. The amount of proteins, including the PHBV depolymerases, that attached to the polymer surfaces was quite constant during the period of significant mass loss of the polymer specimens. The microbial polymer degradation followed a zero‐order rate model, so the residual mass fraction of PHBV films declined linearly with time. The mixed aerobic microbial organisms from fertile soil showed a higher activity of polymer degradation than an aerobic PHBV‐producing bacterium and the mixed anaerobes in the same soil. The mixed anaerobic microorganisms from barren soil decomposed the polymer at a slower rate than the anaerobes from fertile soil, and this was attributed to fewer microbial cells in the barren soil instead of the difference in the microbial species. The temperature effect on PHBV degradation can be described with an Arrhenius equation, and the activation energy is around 16 kcal/mol. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 205–213, 2003