Graphene oxide-decorated Fe<Subscript>2</Subscript>(MoO<Subscript>4</Subscript>)<Subscript>3</Subscript> microflowers as a promising anode for lithium and sodium storage

Mixed transition metal oxides (MTMOs) have received intensive attention as promising anode materials for lithium-ion batteries (LIBs) and sodium-ion batteries (SIBs). In this work, we demonstrate a facile one-step water-bath method for the preparation of graphene oxide (GO) decorated Fe₂(MoO₄)₃ (FMO) microflower composite (FMO/GO), in which the FMO is constructed by numerous nanosheets. The resulting FMO/GO exhibits excellent electrochemical performances in both LIBs and SIBs. As the anode material for LIBs, the FMO/GO delivers a high capacity of 1,220 mAh·g^–1 at 200 mA·g^–1 after 50 cycles and a capacity of 685 mAh·g^–1 at a high current density of 10 A·g^–1. As the anode material for SIBs, the FMO/GO shows an initial discharge capacity of 571 mAh·g^–1 at 100 mA·g^–1, maintaining a discharge capacity of 307 mAh·g^–1 after 100 cycles. The promising performance is attributed to the good electrical transport from the intimate contact between FMO and graphene oxide. This work indicates that the FMO/GO composite is a promising anode for high-performance lithium and sodium storage.

Open image in new window

     

MHSACAE-CNN在噪声下的电机轴承故障诊断

电机的运行情况复杂,实际运行工况下会有大量的噪声,导致其轴承故障诊断精度下降。为了改善这一问题,提出了一种基于多头自注意力机制的一维全卷积自编码网络（One-dimensional Fully Convolutional Autoencoding Network Basedon Multi-head Self-attention,MHSACAE）与卷积神经网络（Convolutional Neural Network,CNN）结合的轴承故障诊断方法。该方法先采用MHSACAE网络进行降噪,再通过CNN进行故障诊断。其中MHSACAE去噪网络采用无监督训练的方式,充分考虑了实际工况和序列数据内在联系,在实现对噪声的滤除效果的同时,最大限度地保留下了原始的故障信息,使得CNN可以实现在噪声情况下对电机轴承故障的高精度诊断。通过与其他轴承故障诊断方法在噪声情况下进行对比,证明提出的方法具有更好的效果。     

Regulation of Polymer Configurations Enables Green Solvent-Processed Large-Area Binary All-Polymer Solar Cells With Breakthrough Performance and High Efficiency Stretchability Factor

With the great potential of the all-polymer solar cells for large-area wearable devices, both large-area device efficiency and mechanical flexibility are very critical but attract limited attention. In this work, from the perspective of the polymer configurations, two types of terpolymer acceptors PYTX-A and PYTX-B (X = Cl or H) are developed. The configuration difference caused by the replacement of non-conjugated units results in distinct photovoltaic performance and mechanical flexibility. Benefiting from a good match between the intrinsically slow film-forming of the active materials and the technically slow film-forming of the blade-coating process, the toluene-processed large-area (1.21 cm²) binary device achieves a record efficiency of 14.70%. More importantly, a new parameter of efficiency stretchability factor (ESF) is proposed for the first time to comprehensively evaluate the overall device performance. PM6:PYTCl-A and PM6:PYTCl-B yield significantly higher ESF than PM6:PY-IT. Further blending with non-conjugated polymer donor PM6-A, the best ESF of 3.12% is achieved for PM6-A:PYTCl-A, which is among the highest comprehensive performances.     

复合型导电高分子材料研究进展

简述了复合型导电高分子材料的研究及发展,并对其导电机理、基体树脂、导电填料的研究概况进行了述评,介绍了其在各领域中的应用．     

一款基于APA300的创新型FPGA实验板

基于Actel公司Flash型FPGA芯片APA300设计并实现一款创新型FPGA实验板.该实验板包括2片互通的APA300、丰富的外围设备和常用外部设备端口,还提供与外部电路连接的扩展接口,能够开展多种创新性实验,并可作为科学预研的平台.在详细介绍了实验板各部分的实现原理和电路连接图后,给出了实验板的两个典型创新性实验示例:协处理器密码机和MP3播放器.     

Optimization of silicon solar cell fabrication based on neural network and genetic programming modeling

This study describes techniques for the cascade modeling and the optimization that are required to conduct the simulator-based process optimization of solar cell fabrication. Two modeling approaches, neural networks and genetic programming, are employed to model the crucial relation for the consecutively connected two processes in solar cell fabrication. One model (Model 1) is used to map the five inputs (time, amount of nitrogen and DI water in surface texturing and temperature and time in emitter diffusion) to the two outputs (reflectance and sheet resistance) of the first process. The other model (Model 2) is used to connect the two inputs (reflectance and sheet resistance) to the one output (efficiency) of the second process. After modeling of the two processes, genetic algorithms and particle swarm optimization were applied to search for the optimal recipe. In the first optimization stage, we searched for the optimal reflectance and sheet resistance that can provide the best efficiency in the fabrication process. The optimized reflectance and sheet resistance found by the particle swarm optimization were better than those found by the genetic algorithm. In the second optimization stage, the five input parameters were searched by using the reflectance and sheet resistance values obtained in the first stage. The found five variables such as the texturing time, amount of nitrogen, DI water, diffusion time, and temperature are used as a recipe for the solar cell fabrication. The amount of nitrogen, DI water, and diffusion time in the optimized recipes showed considerable differences according to the modeling approaches. More importantly, repeated applications of particle swarm optimization yielded process conditions with smaller variations, implying greater consistency in recipe generation.     

Content-based image authentication: current status, issues, and challenges

With today’s global digital environment, the Internet is readily accessible anytime from everywhere, so does the digital image manipulation software; thus, digital data is easy to be tampered without notice. Under this circumstance, integrity verification has become an important issue in the digital world. The aim of this paper is to present an in-depth review and analysis on the methods of detecting image tampering. We introduce the notion of content-based image authentication and the features required to design an effective authentication scheme. We review major algorithms and frequently used security mechanisms found in the open literature. We also analyze and discuss the performance trade-offs and related security issues among existing technologies.     

面向攻击图构建的网络连通性分析

针对目前网络攻击图构建系统的需求,设计网络连通性分析算法。通过对网络拓扑及防火墙规则进行离线分析,可以判断网络中由若干台过滤设备分隔的任意2台主机间的连通性。引入关键实体集的概念,结合经典的Apriori算法提出一种快速有效的获取关键实体集的方法。分析对比表明,关键实体集可以在连通性分析过程中为网络中各节点的重要性评估提供有力依据。