A regulatory role for recombinase activating genes, RAG-1 and RAG-2, in T cell development

Effects of etoposide (VP-16) and cytosine arabinoside (Ara-C) on the cell cycle of HL-60 and THP-1 cells were studied by flow cytometry using the bromodeoxyuridine (BrdU)/DNA assay technique to investigate the efficacy of VP-16 for monocytic leukemia cells. VP-16 inhibited the proliferation of THP-1 cells more strongly than that of HL-60 cells at any concentrations used at 24 and 48 hr. VP-16 arrested HL-60 and THP-1 cells in the G2/M phase and reduced them in the G0/G1 and early S phase at higher concentrations. There was no significant difference in the percentage of G2/M phase cells at the same concentration between both cells. However, reduction in the G0/G1 and early S phase cells was more marked in THP-1 than HL-60 cells significantly. On the other hand, Ara-C perturbed the cell cycle of HL-60 cells more than that of THP-1 cells at 24 and 48 hr. These results suggest that the effects of VP-16 on the cell cycle may be more intense in THP-1 than HL-60 cells, and support the efficacy of VP-16 for treating monocytic leukemia in vivo.     

Mechanical property characterization of film-fabric laminate for stratospheric airship envelope

A stratospheric airship can offer a cost effective alternative to earth orbit satellites for telecommunication and science observation. To float in the stratosphere with very thin air density, the airship needs to be designed with envelope materials that are extremely light, flexible and of high strength. Film-fabric laminates, which consist of single plain woven fabric layer impregnated in polymer matrix and are laminated with thin films for environmental and leakage protection, have unique material characteristics compared to conventional composite structures that can be exploited in the design of the high altitude airship envelope materials. In this study, the material characterization of a film-fabric laminate developed for stratospheric airship envelop was conducted. First, uni-axial tests were performed for fabricated specimens to obtain tensile properties. The tests were done in the thermal chamber at low, room, and high temperatures to investigate the temperature dependency. Next, the effective tensile properties were predicted by geometrically nonlinear finite element analyses. The analyses were done for unit cells where the detailed fiber tow architecture was modeled discretely. The analysis results were compared to the test results and investigated focusing on the geometrical nonlinearity and the micro-structural behavior of the laminates.     

Numerical analysis on electroosmotic flows in a microchannel with rectangle-waved surface roughness using the Poisson–Nernst–Planck model

The present study has numerically investigated two-dimensional electroosmotic flows in a microchannel with dielectric walls of rectangle-waved surface roughness to understand the roughness effect. For the study, numerical simulations are performed by employing the Nernst–Planck equation for the ionic species and the Poisson equation for the electric potential, together with the traditional Navier–Stokes equation. Results show that the steady electroosmotic flow and ionic-species transport in a microscale channel are well predicted by the Poisson–Nernst–Planck model and depend significantly on the shape of surface roughness such as the amplitude and periodic length of wall wave. It is found that the fluid flows along the surface of waved wall without involving any flow separation because of the very strong normal component of EDL (electric double layer) electric field. The flow rate decreases exponentially with the amplitude of wall wave, whereas it increases linearly with the periodic length. It is mainly due to the fact that the external electric-potential distribution plays a crucial role in driving the electroosmotic flow through a microscale channel with surface roughness. Finally, the present results using the Poisson–Nernst–Planck model are compared with those using the traditional Poisson–Boltzmann model which may be valid in these scales.     

PR-MAC: A practical approach for exploiting relay transmissions in multi-rate WLANs

In this paper, we propose a new MAC protocol, called proxy relay-enabled MAC (PR-MAC), to improve the capacity of multi-rate WLANs. PR-MAC introduces a new entity called Proxy Relay Point (PRP), which serves as a relay between the AP and stations. The cooperation of the AP with PRP replaces direct transmissions for low-rate stations with fast two-hop transmissions while the stations think that they communicate directly with the AP. Our experiment and simulation results showed that PR-MAC can significantly improve the throughput of legacy stations without any modification on the MAC operation of the stations.     

Metalorganic Chemical Vapor Deposition of CdTe(133) Epilayers on Si(211) Substrates

Single-crystalline CdTe(133) films have been grown by metalorganic chemical vapor deposition on Si(211) substrates. We studied the effect of various growth parameters on the surface morphology and structural quality of CdTe films. Proper oxide removal from the Si substrate is considered to be the principal factor that influences both the morphology and epitaxial quality of the CdTe films. In order to obtain single-crystalline CdTe(133) films, a two-stage growth method was used, i.e., a low-temperature buffer layer step and a high- temperature growth step. Even when the low-temperature buffer layer shows polycrystalline structure, the overgrown layer shows single-crystalline structure. During the subsequent high-temperature growth, two-dimensional crystallites grow faster than other, randomly distributed crystallites in the buffer layer. This is because the capturing of adatoms by steps occurs more easily due to increased adatom mobility. From the viewpoint of crystallographic orientation, it is assumed that the surface structure of Si(211) consists of (111) terrace and (100) step planes with an interplanar angle of 54.8°. This surface structure may provide many preferable nucleation sites for adatoms compared with nominally flat Si(100) or (111) surfaces. The surface morphology of the resulting films shows macroscopic rectangular-shaped terrace—step structures that are considered to be a (111) terrace with two {112} step planes directed toward 〈110〉.     

Power Performance of AlGaN/GaN HEMTs Grown on SiC by Ammonia-MBE at 4 and 10 GHz

In this letter, we report on the microwave power and efficiency performance of AlGaN/GaN high-electron mobility transistors (HEMTs) grown by ammonia molecular beam epitaxy (ammonia-MBE) on SiC substrates. At 4 GHz, an output power density of 11.1 W/mm with an associated power-added efficiency (PAE) of 63% was measured at V _ds = 48 V on passivated devices. At 10 GHz, an output power density of 11.2 W/mm with a PAE of 58% was achieved for V _ds = 48 V. These results are the highest reported power performance for AlGaN/GaN HEMTs grown by ammonia-MBE and the first reported for ammonia-MBE on SiC substrates.     

Fabrication of Multiscale Gradient Polymer Patterns by Direct Molding and Spatially Controlled Reflow

Size variations of pattern spacing as well as gradient control of the as‐formed polymeric pattern via a spatially controlled reflow process are presented. Micro‐ and nanopatterns of polymethyl methacrylate (PMMA) in the form of line‐and‐space strips are first generated by capillary force lithography (CFL), and the residual layers are removed by ashing process. Subsequently, the exposed PMMA strips underwent a controlled reflow process above the glass transition temperature (T_g) while heating single or both sides of the substrate either in parallel to the line pattern (parallel reflow) or perpendicular to the line pattern (perpendicular reflow). As a result of this controlled reflow, a linear or a parabolic profile of pattern spacing is achieved depending on the heating mode. Furthermore, multiscale gradient patterns are formed with the spacing ranging from 98 nm to 4.23 μm (a difference of two orders of magnitude) in a single patterned layer using the original micropattern of 16 μm width and 8 μm spacing. In order to explain reflow behaviors, a simple theoretical model relating the normalized pattern width to the polymer viscosity is derived based on a leveling kinetics of polymer melt. Also, gradient PMMA channels are fabricated and bonded to a glass substrate, which are used to flow a liquid inside the channels by capillarity‐driven flow.     

Release behavior of active material from poly(vinyl amine)/polyelectrolyte composite hollow particles

Polyvinyl amine (PVAm) hydrogel hollow particles treated by layer-by-layer (LbL) assembly methods were fabricated. The structures of the prepared particles were confirmed through zeta-potential measurements and scanning electron microscopy (SEM). In addition, the loading amount and release rate of Chromotrope 2R (CR) from the prepared particles in each deposition step was investigated. The loading amount had an alternating tendency according to an increase in the layer number. When the outermost layer consisted of poly(sodium 4-styrenesulfonate) (PSS), CR permeation was prevented by ionic repulsion between the PSS and CR. On the other hand, CR easily permeated into the particles when the outermost layer was poly(diallyldimethyl ammonium chloride) (PDDA). The release rate was then changed by ionic interaction between the CR and the cationic polyelectrolyte and by the ionic repulsive force between the CR and the anionic polyelectrolyte. These results indicate that PVAm hydrogel hollow particles treated by the LbL method could potentially be used in the controlled release of water-soluble materials.     

Enhancement of the punch pin durability induced by the PVD coating in production process of the automotive inner pipe

This experimental studies were carried out in order to understand the effects of the PVD coating and the UNSM treatment of HSS55 (high speed steel 55) during the production of the automotive inner pipe by the plastic deformation of S45C. The field test and the SEM images revealed that the PVD coating is necessary in spite of the high compressive residual stresses which were formed at the head of a punch pin. Upon the application of the AlCrN coating with the UNSM treatment the productivity and reliability of a punch pin had improved more than about 2.6 times compared to that of the TiN coating without the UNSM treatment. It is likely that the improvement is caused by the decreased stress concentration factor by the ‘wrapped in oxides’ inside of an abrasion pit. The abrasion pits were mostly generated within range of 5% ∼ 50% of the diameter ratio from the end of a pin and reached the maximum value about 17% from the end of a pin.