A study on removal efficiency of phenol and humic acid using spherical activated carbon doped by TiO<Subscript>2</Subscript>

This study aimed to find a way to remove organic pollutants, phenol and humic acid in aqueous solutions using TiO₂ spherical activated carbon (Ti-SPAC). The Ti-SPAC was manufactured by resin ion-exchange and a heating process. This method was very effective not only in creating TiO₂ on the surface of the supports evenly, but also in making activated carbon that has highly-developed micro pores. To estimate whether Ti-SPAC has the proper features as a photocatalyst and adsorbent, it was examined in detail by X-ray patterns, SEM image, EDXS, BET, EPMA. The results proved that Ti-SPAC is a very useful material for treating wastewater by photocatalysis and absorption.     

In situ polyurethane/silica composite formation via a sol‐gel process

Polyurethane acrylate anionomer (PUAA)/silica composite gels were prepared by the sol‐gel reaction of tetraethoxysilane (TEOS) and methacryloxypropyl trimethoxysilane (MPTS) incorporated to PUAA gels by using a swelling method. The formation and structure of composites were confirmed by FTIR, X‐ray diffraction, and SEM. As a result, we found that silica components in composites are located within the ionic domains of their gels and interacted with PUAA via hydrogen bonding. This drastically enhanced the mechanical properties of the composites. Mechanical properties are also improved by MPTS, because MPTS improves the dispersibility and adhesion of silica components in PUAA/silica composite gels. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 2327–2334, 2002     

ARTIFICIAL INTELLIGENCE CONTROL OF FOOD FREEZER USING ROTATING DISK AIR DISTRIBUTOR FOR UNIFORM FREEZING

A rotating disk air distribution (RDAD) system consisting of a rotating disk with an air supply hole was fabricated to solve the nonuniform freezing problem of a freezer that supplies air through a duct at a fixed location. The RDAD system was installed in a freezer to supply freezing air in various directions by controlling the position of the air supply hole. An equation estimating air velocity in the freezer was developed based on heat balance between a brass block thermocouple (BBT) probe and ambient air stream. The equation was applied to the analysis of airflow patterns developed through the RDAD and the fixed duct system. For control of the RDAD system, a fuzzy matrix was constructed with the measured nodal temperature at 3D locations in the freezer and used to search for the optimum direction of air supply. Uniform cooling was accomplished with the RDAD system using fuzzy and expert algorithms leading to temperature deviation σ=0.666, compared with 0.289 of the fixed air supply system. Cooling rate of model food (BBT) was 1.75 times faster than that of the fixed system.     

Synthesis of a new polyarylenvinylene derivative based on a terstyryl group linked by a maleimide group

Summary The new polyarylenevinylene, structurally based on a terstyryl group linked by a maleimide group, was prepared from a new dibrominated diphenylmaleimide monomer and p-divinylbenzene by Heck-type Pd catalyzed polycondensation. The polymer was soluble in common organic solvents and had M _w and the polydispersity index of 73,600 g/mol and 5.0, respectively. Analysis with IR and NMR indicated that the polymer had a stereoregular vinylene sequence in the backbone of Z, E, E-configurations in series. The polymer showed optical absorption maximums at 353 nm and 444 nm and the bright orange red-colored photoluminescence at 570 nm in a solution and 590 nm in a film. Received: 19 September 2000/Revised version: 4 December 2000/Accepted: 11 December 2000     

Photocatalytic,magnetic, and electrochemical properties of La doped BiFeO3 nanoparticles

We successfully prepared La_1?xBi_xFeO₃ (L_xB_1?xFO, x?=?0.01–0.1) nanoparticles using a sol-gel technique, and studied their photocatalytic, magnetic, and electrochemical properties. Structural refinement studies of the prepared nanoparticles revealed a gradual structural transition from rhombohedral to orthorhombic. The average grain size was observed to decrease with increasing the concentration of La. The photocatalytic degradation of Rhodamine B (RhB) in the presence of the prepared nanoparticles was studied under visible light irradiation. The L_0.06B_0.94FO nanoparticles showed higher degradation efficiency compared to pure BiFeO₃ (BFO) nanoparticles. Magnetic studies showed that La doping improved the magnetization of BFO due to the reduction in grain size and destruction of cycloid coupling of spins. Higher specific capacitance values were obtained for La doped BFO (LBFO) nanoparticles compared to BFO nanoparticles. A maximum specific capacitance of 219?F?g^?1 was obtained at a current density of 1?A?g^?1 for LBFO nanoparticles.     

A prioritization method for replacement of water mains using rank aggregation

Pipe breaks in municipal water distribution networks may cause serious damage economically and socially. Existing methods for replacement scheduling of pipes do not provide practical indicators for replacing an individual deteriorated pipe. This work formulates the selection problem as the decision of preference ordering or ranking and proposes a bipartite ranking-based approach. The suggested approach also considers loss from broken pipes in terms of the costs associated with broken water main and its repair. We use rank aggregation method to integrate multiple ranks into replacement order of water mains. The suggested framework prioritizes current pipe sections for replacement based on the aggregated ranks. Multiple ranks given by the reliability of water pipe sections are aggregated and a cost effective policy for pipe replacement is derived.     

Synthesis and characterization of the carbon nanotube-based composite materials with poly(3,4-ethylenedioxythiophene)

We report a procedure to prepare a conducting nano-composites composed of multi-walled carbon nanotubes (MWNTs) and PEDOT by using a poly(sodium 4-styrenesulfonate) (PSSNa) as a inter-linking molecule between MWNT and PEDOT. When PSSNa chains are introduced on the MWNTs via physicochemical interaction, the surface of MWNT becomes negatively charged, and PSS-modified MWNTs promote the effective association of the positively charged PEDOT chains. The resulting MWNT-PSS/PEDOT composites are characterized by a better interconnection between MWNT and PEDOT components.