Summary The synthesis is reported of copolymers of styrene with methacrylic acid and of methyl methacrylate with methacrylic acid by radical copolymerization, of copolymers of methyl methacrylate with methacrylic acid by partial alkaline hydrolysis of poly(methyl methacrylate), and of block copolymers of styrene with methacrylic acid. Modified titration curves of all these copolymers were recorded in water and water-ethanol solutions. In a solution containing 50 mass.% ethanol, only small differences could be observed between the potentiometric behaviour of the individual copolymers and polymethacrylic acid. Also, there were no essential differences in any of the solvents used between the potentiometric behaviour of block copolymers of styrene with methacrylic acid, on the one hand, and polymethacrylic acid, on the other. On the contrary, maxima and minima were always observed on the modified titration curves of statistical copolymers with a higher content of the hydrophobic comonomer in solutions with a high water content. Thus, using the modified titration curves, it is possible to decide whether a given copolymer is of the block or statistical type. 相似文献
Oxygen reduction on the Au(100) face was studied by the rotating disk-ring electrode technique in solutions of anions which adsorb strongly on gold (HSO4−/SO42− and/or OH−) over the entire pH range. The specific adsorption of OH− anions, which is a pH dependent process, is found to play the key role in determining the reaction pathways. In the absence of OH− adsorption, for pHs below 6, the reduction of O2 begins as a 2e-process. Due to the increase in local pH during O2 reduction, the reaction pathway turns into a 4e-reduction at a certain potential depending on the pH of the solution. For pHs higher than 6, O2 reduction begins as a 4e-process in the potential region where specifically adsorbed OH− anions are present. 相似文献
The investigation of microstructure, some electrical and optical parameters of transparent ThO2-15 mol % yo1.5 ceramics has shown: (a) a very low porosity, close to zero; (b) a higher electrical conductivity than is usual for ThO2 ceramics of the same composition, with the activation energy 1.12 eV; (c) a relative permittivity r 33 under the given conditions; (d) confirmation of a single-phase fluorite-type cubic structure by means of Raman and infrared spectra. 相似文献
Multimedia Tools and Applications - New mobile applications need to estimate user activities by using sensor data provided by smart wearable devices and deliver context-aware solutions to users... 相似文献
Numerous visual notations are present in technical and business domains. Notations have to be cognitively effective to ease the planning, documentation, and communication of the domains’ concepts. Semantic transparency (ST) is one of the elementary principles that influence notations’ cognitive effectiveness. However, the principle is criticized for not being well defined and challenges arise in the evaluations and applications of ST. Accordingly, this research’s objectives were to answer how the ST principle is defined, operationalized, and evaluated in present notations as well as applied in the design of new notations in ICT and related areas. To meet these objectives, a systematic literature review was conducted with 94 studies passing the selection process criteria. The results reject one of the three aspects, which define semantic transparency, namely “ST is achieved with the use of icons.” Besides, taxonomies of related concepts and research methods, evaluation metrics, and other findings from this study can help to conduct verifiable ST-related experiments and applications, consequently improving the visual vocabularies of notations and effectiveness of the resulting diagrams.
Intelligent Service Robotics - Walking robots are considered as a promising solution for locomotion across irregular or rough terrain. While wheeled or tracked robots require flat surface like... 相似文献
The wettability and infiltration of molten ZrSi2 and ZrSi2-Lu2O3 alloys into Cf/SiC and B4C-infiltrated Cf/SiC composites were investigated to understand the interfacial interactions that occur during the development of Cf/SiC-ZrC and Cf/SiC-ZrB2-ZrC-Lu2O3 materials. A significant evaporation of Si from the liquid affected the wetting behaviour of the alloy when tested in a vacuum at 1670 °C. The better wetting and spreading of the alloy over the surface was observed for the composites with lower overall porosity (12 %). On the other hand, the formation of an outer dense layer, followed up by the uniform infiltrated region up to ~ 1 mm was observed for the Cf/SiC with higher porosity (21 %). The infiltrated alloy reacted with SiC matrix to form ZrC or with B4C-infiltrated SiC matrix to form ZrB2-ZrC-SiC. The Lu2O3 particles were not wetted by the melt, and were pushed away of the reaction zone by the solidification front. 相似文献
Although the prominent concept of the last decade – user experience – maintains its significance in diverse disciplines, especially design, its focus has changed to eliciting positive user experiences by pursuing new possibilities for consumer products rather than by solely seeking solutions to existing problems. Designers continue to aim for rich user experiences with a variety of products, but have neglected self-service (interactive) kiosks. Hence, this paper, after giving a brief overview of the positive psychology literature, demonstrates the dimensions of positive user experiences with self-service kiosks through an empirical study conducted on coffee vending machines and automated tellers. 相似文献