Morphologies-Controlled Synthesis and Optical Properties of Bismuth Tungstate Nanocrystals by a Low-Temperature Molten Salt Method

Well-crystallized bismuth tungstate (Bi₂WO₆) powders with different morphologies were successfully synthesized via a low-temperature molten salt method. The powders were characterized by X-ray diffraction, transmission electron microscopy, and UV-Vis, respectively. It was found that the variation of morphology of the obtained Bi₂WO₆ powder mainly depends on the different reaction temperatures and the weight ratio of LiNO₃–NaNO₃ salt to precursor. In addition, the UV-Visible absorption spectra showed that the synthesized powders had strong light absorption properties not only in the ultraviolet light but also in the visible light region.     

降低循环流化床锅炉飞灰含碳量的因素分析

循环流化床锅炉的飞灰含碳量是锅炉燃烧工况好坏的直接反映 ,其对锅炉的热效率的影响是很大的 ,它还直接影响着粉煤灰的综合开发和利用 .在对云天化循环流化床锅炉的生产实验研究中 ,分析了影响循环流化床锅炉飞灰含碳量的各种因素 (床温、煤质煤粒、一次风、二次风、床压和旋风分离器效率等 ) ,通过实验研究找到了降低循环流化床锅炉飞灰含碳量的具体而又行之有效的操作方法 ,以指导实际生产 .     

High catalytic activity of PdOx/MnO2 for CO oxidation and importance of oxidation state of Mn

PdO_x/MnO₂ has been examined as a catalyst for CO oxidation using a conventional flow reactor at reaction temperatures between 50 and 150°C. In the reaction conditions of GHSV (gashourlyspacevelocity) of 1.22 × 10⁵/h and CO concentration of 2000 ppm, PdO_x/MnO₂ showed higher catalytic activity compared with PdO_x/Mn₂O₃, which had been previously reported as an effective catalyst due to the cooperative action of Pd and Mn₂O₃ for this reaction. The reason for higher activity of PdO_x/MnO₂ than PdO_x/Mn₂O₃ has been investigated using TPR (temperatureprogrammed reduction) and XPS studies. TPR showed that PdO_x/MnO₂ could be reduced by CO at much lower temperature than PdO_x/Mn₂O₃. During the experiment of reduction and oxidation, XPS showed that the valence of Mn in the PdO_x/MnO₂ was between 4+ and 3+, which is higher than that of Mn in the PdO_x/Mn₂O₃ catalyst of which the valence has been reported to be between 3+ and 2+. It is known that in this catalyst system the support supplies oxygen onto Pd, where the oxidation occurs with adsorbed CO, and the ability of the support to provide oxygen improves the performance of the catalyst. Therefore, it was concluded that the readiness of MnO₂ to be reduced with maintaining a higher oxidation state showed higher CO oxidation activity than Mn₂O₃ as support for PdO_x.     

Nanocrystalline CeO2 in SBA-15: Performance of Pt/CeO2/SBA-15 Catalyst for Water-gas-shift Reaction

CeO₂ particles confined within the pores of an SBA-15 mesoporous silica host were prepared by incipient wetness impregnation (IMP) and deposition precipitation (DP) methods. The materials were characterized by XRD, N₂-adsorption and temperature programmed reduction (TPR) to evaluate the structure, texture, and redox properties. The preparation procedure had significant impact on the assembling mode of CeO₂ inside the SBA-15 mesopores. A high dispersion of CeO₂ particles was achieved via DP, whereas the dispersion of CeO₂ prepared by IMP was found to be inhomogeneous and CeO₂ partially blocked the pores. The CO conversion in the water-gas-shift reaction was enhanced over 1 wt% Pt supported on CeO₂-modified SBA-15 obtained by DP.     

火焰原子吸收光谱法测定硅粉中的铜

介绍了用火焰原子吸收法测定工业硅粉中微量铜的具体方法和过程，同时也给出了最佳实验条件。实验中采用新的样品处理方法，得到了令人满意的结果。其中样品回收率为99．8％—104．0%，相对标准偏差为0．31％—0.38％。本方法在实际应用过程中，简单、快速、     

钛酸铝材料性能及合成工艺

着重介绍了钛酸铝（Al2TiO3）陶瓷的结构、性能和合成工艺，并对今后发展趋势提出了基本观点。     

GCr15轴承钢连铸过程中热物性参数的研究

借鉴前人实验数据,采用一定的数学方法,对轴承钢的热物性参数进行了研究.结果表明：GCr15轴承钢的液相线温度为1 465.7℃,固相线温度为1 328.4℃,零强度温度为1 380℃左右,零塑性温度为1 330℃左右;在固相区、液固两相区、液相区分别采用不同的公式进行处理,可使结果更加准确,还避免了奇异性.研究结果可为轴承钢连铸工艺有限元模拟提供基础.     

大学英语读写课堂教师提问的逻辑性调查分析

教师提问、学生回答是语言课堂中的一个逻辑过程。教师的提的问题和课堂模式具有逻辑艺术,与学生产生思维共振,教与学才能统一。通过对大学英语读、写、译课堂观摩调查结果的分析,提出重视课堂提问的逻辑性,让学习者开动脑筋把注意力从学什么转移到怎样学和怎样思考的问题上,从而提高语言学习者的学习能力、理解能力和表达能力。     

AADL 测试模型的构造研究

目前,结构分析和设计语言AADL在任务关键嵌入式系统领域有着良好的应用.为了保障任务关键软件的质量,文章提出基于AADL测试模型对AADL设计模型进行测试,以发现设计模型中存在的错误.研究给出了体现系统拓扑结构的AADL测试模型的形式定义及由AADL构造该测试模型的算法,基于该测试模型可以对AADL设计模型中构件交互的输入、输出端口序列和连接的正确性进行测试,并以飞行控制系统的AADL设计模型为例,阐释了研究成果.     

一种双U形缺陷地结构低通滤波器的设计

基于双U形缺陷地结构设计了一种低通滤波器。首先利用三维电磁场仿真软件分析了双U形DGS结构的S参数频响特性,然后利用该DGS结构加工制作了DGS结构低通滤波器,实验室测得该滤波器3 dB截止频率为3．26 GHz,通带范围内波纹最大是0．4 dB。插入损耗大于20 dB的阻带宽度为5．2 GHz。