石英玻璃结构调整和二阶非线性光学效应产生机制的理论研究

从非谐振动理论观点出发．考虑到玻璃在外场及加热条件下结构取向调整和弛豫，对外部静电场和加热的温度及加热时间对其信频光产生的影响进行了探讨性理论研究，结果较好地解释了有关实验现象。     

火烧油层技术在庙5块低渗透稠油油藏中的应用

方法在物理模拟的基础上，利用数值模拟及油藏工程方法，对影响火烧油层的技术参数进行了优选研究，并对影响火驱成败的油藏地质参数、注气参数进行了分析。目的寻找适合庙５块低渗透稠油油藏的开采方法。结果提出了庙５块火驱的最佳开采方式、点火参数及注气参数；庙５块火驱生产后，平均单井日产液由０１ｔ上升到５６ｔ，平均单井日产油由０１ｔ上升到３５ｔ，生产２６ｄ后由于压风机供风不足被迫停止火驱注气；从数模结果看：火驱最终采收率可达３９８％。结论火烧油层是一种潜力很大的稠油开采方法，但其物理、化学反应机理复杂，火烧前缘难以控制；庙５块火驱初期虽然见到了一定的生产效果，但没有取得经济效益     

聚六亚甲基碳酸酯二醇增韧环氧树脂的结构与性能

采用羟基封端的脂肪族碳酸酯－聚六亚甲基碳酸酯二醇对环氧树脂进行了增韧，通过扫描隧道显微镜，扫描电子显微镜，差示扫描量热分析以及动态力学性能分析等方法研究了增韧ＥＰ的结构与性能的关系。     

一种实验炼钢渣的穆斯堡尔谱研究

一种实验炼钢渣不同炉次样品的室温透射穆斯堡尔谱由两组裂距较大的四极分裂双峰和一组裂距较小的双峰组成，它们分别相应于具有不同微观环境的Ｆｅ＾２＋和Ｆｅ＾３＋。参照文献中已知ＦｅｘＯ的穆斯堡尔谱数据，可确定该渣中的主要含铁相为ＦｅｘＯ。Ｘ射线衍射相分析给出相同的结果。按亚谱的面积比计算出Ｆｅ＾２＋和Ｆｅ＾３＋的相对含量分别为８５％和１５％左右。进一步选取与样品晶体结构相联系的原子簇模型。用ＭＳ－Ｘａ方     

精密角位移传感器及其可靠性研究

从理论上探讨了磁阻率效应，叙述了精密角位移传感器的工作原理及结构设计。传感器的分辨率已达０．０１°，通过可靠性寿命试验，传感器的失效率λ（ｔ）＜１×１０－７／ｈ。     

Numerical detection and continuation of saddle-node homoclinic bifurcations of codimension one and two

An extension of an existing truncated boundary-value method for the numerical continuation of connecting orbits is proposed to deal with homoclinic orbits to a saddle-node equilibrium. In contrast to previous numerical work by Schecter and Friedman and Doedel, the method is based on (linear) projection boundary conditions. These boundary conditions, with extra defining conditions for a saddle-node, allow the continuation of codimension-one curves of saddle-node homoclinic orbits. A new test function is motivated for detecting codimension-two points at which loci of saddle-nodes and homoclinic orbits become detached. Two methods for continuing such codim 2 points in three parameters are discussed. The numerical methods are applied to two example systems, modelling a DC Josephson junction and CO oxidation. For the former model, existing numerical results are recovered and extended; for the latter, new dynamical features are uncovered. All computations are performed using AUTO.     

DOA: DSR over AODV Routing for Mobile Ad Hoc Networks

We present a lightweight hierarchical routing model, Way Point Routing (WPR), in which a number of intermediate nodes on a route are selected as waypoints and the route is divided into segments by the waypoints. Waypoints, including the source and the destination, run a high-level intersegment routing protocol, while the nodes on each segment run a low-level intrasegment routing protocol. One distinct advantage of our model is that when a node on the route moves out or fails, instead of discarding the whole original route and discovering a new route from the source to the destination, only the two waypoint nodes of the broken segment have to find a new segment. In addition, our model is lightweight because it maintains a hierarchy only for nodes on active routes. On the other hand, existing hierarchical routing protocols such as CGSR and ZRP maintain hierarchies for the entire network. We present an instantiation of WPR, where we use DSR as the intersegment routing protocol and AODV as the intrasegment routing protocol. This instantiation is termed DSR over AODV (DOA) routing protocol. Thus, DSR and AODV—two well-known on-demand routing protocols for MANETs—are combined into one hierarchical routing protocol and become two special cases of our protocol. Furthermore, we present two novel techniques for DOA: one is an efficient loop detection method and the other is a multitarget route discovery. Simulation results show that DOA scales well for large networks with more than 1,000 nodes, incurring about 60 percent-80 percent less overhead than AODV, while other metrics are better than or comparable to AODV and DSR.     

热轧高强钢平整机辊径参数设计技术研究

基于高强钢平整机的生产工艺特点,结合板形与辊耗问题,将带材的出口前张力与辊间压力横向分布都均匀作为目标函数,把保证所有被平整高强钢产品的机械性能满足产品大纲要求作为约束条件,提出了一套针对热轧高强钢平整机的工作辊与支承辊辊径参数设计模型.其研究结果对指导宝钢分公司1880 mm热轧平整机的工艺参数的确定与技术谈判发挥了重要作用,并具有进一步的推广价值.     

沿江圩区排涝水文计算实例

设计排涝模数的计算是圩区排涝规划的主要内容之一,它的大小决定了排涝站的装机容量和涵闸尺寸.本文推求了安徽省马鞍山市大公圩地区的排涝模数,是沿江圩区排涝水文计算的一个应用实例.