A pilot study on accelerated sludge degradation by a high-concentration membrane bioreactor coupled with sludge pretreatment.

A new sludge treatment process combining a high MLSS membrane bioreactor with sludge pretreatment techniques was studied in pilot-scale experiments. The membrane bioreactor (MBR) was adopted for high efficiency aerobic digestion. The combination of alkaline-ozone treatment of the mixed liquor in the MBR reactor accelerated the biodegradation process by enhancing biodegradability of the sludge. The hydraulic retention time (HRT) of the reactor was set as 3.1 days and the DO level was 1 mg/L on average. After 5 months of operation, the accumulative total solids reduction was more than 70%. Removal efficiency of volatile solids and non-volatile solids were 76% and 54%, respectively. It was found that a considerable portion of the non-volatile solids was dissolved into ions and then flushed out with the effluent. Also, about 41% and 28% of T-N and T-P in the raw sludge were removed although no biological nutrient removal process was adopted. The experiment was run smoothly without significant membrane fouling, even at the relatively high levels of MLSS concentration (11,000-25,000 mg/L). It is concluded that the newly proposed process can significantly increase the sludge reduction efficiency with much shorter retention times.     

Cowden's disease--a report on the first case in Korea and literature review

Cowden's disease, or multiple hamartoma syndrome, is an uncommon condition with characteristic mucocutaneous lesions associated with abnormalities of the breast, thyroid, and gastrointestinal tract. We describe a 32-year-old man with oral mucosal papillomatosis and plantar hyperkeratosis as a definite case of Cowden's disease according to the criteria proposed by Salem and Steck. The patient also had a thyroid mass and numerous gastrointestinal polyps endoscopically. Histologically the polyps were hamartomatous or hyperplastic polyps. The oral papillary lesions were fibroepithelial polyps and the thyroid mass was a follicular adenoma. We review the literature on this entity and summarize the pertinent findings. To the best of our knowledge, this is the first documented case of Cowden's disease in a Korean.     

Mitigating tail latency in IEEE 802.11–based networks

Delay sensitive applications are being actively introduced with the advent of 5G and vehicular communications, and such applications are very sensitive to tail latency. However, tail latency has not been seriously considered so far, especially in IEEE 802.11–based networks. Channel access is scheduled by random Contention Window (CW) values in IEEE 802.11–based networks, and the node with the larger CW waits longer, and it may even observe multiple transmissions from a single contending node, which results in a long latency tail. In this paper, we propose a new decentralized MAC called SynchMAC to mitigate this latency tail. In SynchMAC, every competing node transmits exactly one packet within a virtual time slot without a centralized controller. Using the proposed approach, the maximum channel access latency is bounded by T×2N, where T is the time required for transmitting a single packet (including Inter‐Frame Space and CW) and N is the number of competing nodes. To maximize the system throughput, the proposed scheme optimizes the value of T by considering the probability of successful transmission. Our simulation study shows that SynchMAC reduces the maximum access latency by up to 94% and 53% compared with the conventional IEEE 802.11 MAC and the comparative scheme, respectively, without degrading throughput performance. We also show that SynchMAC is easily extended to support weighted access.     

Prediction of microstructure evolution during high temperature blade forging of a Ni−Fe based superalloy,Alloy 718

The mechanical properties of the Ni−Fe-based Alloy 718 depend very much on grain size, as well as the strengthening phases, γ’ and γ. The grain structure of the superalloy components is mainly controlled during thermo-mechanical processes by the dynamic, meta-dynamic recrystallization and grain growth. In this investigation, the evolution of the grain structure in the process of two-step blade forging was experimentally and numerically dealt with. The evolution of the grain structure in Alloy 718 during blade forging was predicted using a 2-DFE simulator with implemented constitutive models on dynamic recrystallization and grain growth. The comparison of the simulated microstructure with the actual grain structure of the forged parts validated the prediction of the grain structure evolution. The effect of dynamic recrystallization on the evolution of grain structure is highlighted in this article.