A polyamide-silica composite prepared by the sol-gel process

Summary A new kind of organic-inorganic hybrid composite was prepared by means of the sol-gel process. The polymer employed was a mixed-isomer aromatic polyamide having good solubility and thermal stability. The silica constituting the inorganic phase was produced by the hydrolysis and condensation of tetramethoxysilane. The bonding between the phases involved aminophenyl-trimethoxysilane, in which the amino group can react with the phthaloyl chloride end-capped polymer, and the methoxysilane groups undergo hydrolysis. The composition of these composites was varied by changing the linear polymer chain length and relative amount of tetramethoxysilane. The gelation time was found to range from a few minutes to several days. Thermogravimetric analyses showed that decomposition starts at approximately 450 °C. Thin films cast from materials having a relatively high silica content were opaque and rigid, but those with low silica content were flexible and transparent.     

Miscibility behavior of blend of polyesteramides of linseed oil and dehydrated castor oil with poly(methacrylic acid)

Blending of two polymers in solution is a simple and cost‐effective technique to improve upon the physical and mechanical properties of the component polymers through synergism. To obtain maximum synergy in their properties, the component polymers should be miscible with each other on molecular scale. Polymer blends of complex physicomechanical properties are being actively investigated. Poly(methacrylic acid) (PMAA), a commercial polymer, yields transparent, hard, brittle, and water‐sensitive films. It has been blended with natural polymers like dextran, collagen, and gelatin to obtain films with improved physical and mechanical characteristics. Polyesteramides, which are easily synthesized from vegetable seeds oil, a sustainable resource, have found application in surface coatings. These oligomeric products do not make free standing films in the ambient condition. The polyesteramides from vegetable seeds oil can be used to obtain blend with PMMA of improved mechanical and water absorption properties. In this study, linseed oil polyesteramide (LOPEA) and dehydrated castor oil polyesteramide (DCPEA), the source oils with different unsaturation in their fatty acid chains, were blended with PMAA through mixing in solution in the ratio DCPEA/LOPEA: PMAA as 80/20, 70/30, 60/40, 50/50, 40/60, 30/70, and 20/80. In the first instance, the miscibility of the two components was investigated in solution by viscosity and ultrasonic measurements and in solid phase through differential scanning calorimetry (DSC) and scanning electron microscopy (SEM). Moisture absorption by the blend was also studied. DCPEA and LOPEA show immiscibility with PMAA in solution phase while LOPEA with more unsaturation in the fatty acid chain of the oil was found more immiscible than DCPEA. DCPEA shows a narrow miscibility window in the solid phase while LOPEA was found immiscible with PMAA in the solid phase too. Uptake of moisture was found to be markedly reduced in the blends of DCPEA/LOPEA with PMAA. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 1367–1374, 2007:     

Quantitative preparation of long chain thioethers from an oxo-trans-2-enoic ester and a 9,12-dioxo-trans-10-enoic acid

Branched-chain thioethers have been prepared from methyl 4-oxo-trans-2-hexadecenoate and 9,12-dioxo-trans-10-octadecenoic acid. The reagents involved in these preparations were mercaptoacetic and mercaptopropionic acids. The yields of these thioethers are almost quantitative.     

Structure and Biological Significance of Triacylglycerols Containing Cyclopropene Acyl Moieties

Cyclopropene fatty acids are constituents of seed lipids of various plants, including sources of edible fats, such as cottonseed and kapok. Physiological and toxicological properties of lipids containing cyclopropene acyl moieties are reviewed and the difficulties encountered in the elucidation of the structures of triacylglycerols containing cyclopropene acyl moieties are discussed. A novel method for the analysis of such triacylglycerols is presented.     

Synthesis of tetrazole from α, β—Unsaturated carbonyl fatty acid

Methyl 4-oxo-trans-2-octadecenoate (II), when treated with excess hydrazoic acid in the presence of BF₃-etherate, produced 66% methyl 5-aza-nonadec-trans-2-enoate (4,5-d)-tetrazole (III), 10% methyl 5-aza-nonadec-4-oxo-trans-2-enoate (IV) and 7% pentadecamide (V). Individual products were characterized by spectral and elemental methods.     

Shape optimization of a micromixer with staggered herringbone groove

Shape optimization of a staggered herringbone groove micromixer using three-dimensional Navier-Stokes analysis has been carried out. The analysis of the degree of mixing is performed by the calculation of spatial data statistics. The calculation of the variance of the mass fraction at various nodes on a plane in the channel is used to quantify mixing. A numerical optimization technique is applied to optimize the shape of the grooves on a single wall of the channel. Two design variables, namely, the ratio of the groove depth to channel height ratio and the angle of the groove, are selected for optimization. A mixing index is used as the objective function. The results of the optimization show that the mixing is very sensitive to the shape of the groove which can be used in controlling the mixing in microdevices. The mixing is affected by the depth of the groove much more than the angle of the groove.     

Effects of hygrothermally decomposed polyurethane on the curing and mechanical properties of carbon black‐filled epoxidized natural rubber vulcanizates

Hygrothermally decomposed polyurethane (HD‐PUR) was mixed up to 20 phr in epoxidized natural rubber (with 50 mol % epoxidation; ENR50) recipes, and the curing and mechanical behaviors were studied. Mechanical testing of the ENR50/HD‐PUR vulcanizates determined the tensile, tear, compression‐set, hardness, abrasion, hysteresis, and resilience properties. No significant changes were observed in the tensile properties with the incorporation of HD‐PUR. The ENR50 compounds showed an increase in compression set with increasing HD‐PUR content. Rubbers cured by a semi‐efficient vulcanization system gave the best overall performance. A further improvement in curing and mechanical properties was achieved by the carbon black grade N330 being replaced with a more active grade (N375). © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 2265–2276, 2002     

Graft Copolymerization of Acrylamide onto Oil Palm Empty Fruit Bunch (OPEFB) Fiber

Grafting of acrylamide (AAm) onto oil palm empty fruits bunch fiber using hydrogen peroxide as initiator and methyl acrylate as comonomer was investigated. The amount of comonomer needed to make grafting of acrylamide possible was determined. The percentage of poly(acrylamide) and the comonomer in the final graft copolymer was estimated by elemental analysis. Results obtained indicated that methyl acrylate facilitated the incorporation of acrylamide monomer onto OPEFB. The reactivity ratios for both monomers were determined by using Fineman–Ross plot. The effects of reaction temperature and period as well as amount of the initiator, solvent, monomer and comonomer on the percentage of grafting at fixed amount of comonomer (11 mmol) were studied. Maximum percentage of grafting was achieved when the amount of initiator and solvent 3.98×10⁻³ mol and 50 mL respectively. The optimum reaction temperature was 50 ^○C and the reaction period was 90 min. Highest percentage of grafting was 232% when 25.6 mmol of acrylamide was used under these optimum conditions. The presence of functional group in the grafted polymer is characterized by infrared spectroscopy and the surface morphology is observed by scanning electron microscopy. Thermoanalytic investigation on OPEFB and OPEFB-g-PAAM were carried out to evaluate the thermal stability and respective activation energy of the materials.     

KHATT: An open Arabic offline handwritten text database

A comprehensive Arabic handwritten text database is an essential resource for Arabic handwritten text recognition research. This is especially true due to the lack of such database for Arabic handwritten text. In this paper, we report our comprehensive Arabic offline Handwritten Text database (KHATT) consisting of 1000 handwritten forms written by 1000 distinct writers from different countries. The forms were scanned at 200, 300, and 600 dpi resolutions. The database contains 2000 randomly selected paragraphs from 46 sources, 2000 minimal text paragraph covering all the shapes of Arabic characters, and optionally written paragraphs on open subjects. The 2000 random text paragraphs consist of 9327 lines. The database forms were randomly divided into 70%, 15%, and 15% sets for training, testing, and verification, respectively. This enables researchers to use the database and compare their results. A formal verification procedure is implemented to align the handwritten text with its ground truth at the form, paragraph and line levels. The verified ground truth database contains meta-data describing the written text at the page, paragraph, and line levels in text and XML formats. Tools to extract paragraphs from pages and segment paragraphs into lines are developed. In addition we are presenting our experimental results on the database using two classifiers, viz. Hidden Markov Models (HMM) and our novel syntactic classifier.     

UV‐radiation–induced preirradiation grafting of methyl methacrylate onto lignocellulose fiber in an aqueous medium and characterization

The preirradiation method of grafting has been established by ultraviolet radiation. Methyl methacrylate (MMA) was grafted onto jute fiber in an aqueous medium. The variation of graft weight with UV‐radiation time, monomer concentration, and reaction time was investigated. The conversion of monomer into homopolymer and graft copolymer was evaluated. The graft weight passes through a maximum value (～ 122%) with UV‐radiation time. The optimum value of the monomer concentration was evaluated for maximum degree of grafting. Graft copolymerization of MMA onto lignocellulose fiber significantly increases the elongation at break (～ 65%) compared to that of the “as‐received” sample. However, a linear decrease on breaking load was observed with the increase of graft weight. The estimation of degree of grafting was achieved using an IR technique by correlating band intensities with the degree of grafting. Considering the water‐absorption property, the grafted sample showed a maximum up to 61% decrease in hydrophilicity compared to that of the as‐received sample. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 1667–1675, 2004