Seasonal analysis of the thermal behaviour of traditional underground wine cellars in Spain

Traditional underground wine cellars are a good example of bioclimatic construction, providing optimum conditions for maturing wine with no energy consumption. This article studies the annual thermal behaviour of traditional underground wine cellars in one of the most well-known wine producing areas in Spain, the Ribera del Duero. For this we have applied a method based on multiple regression analysis using experimental data monitored for 1 year. The results show that the interior air temperature is fundamentally conditioned by the undisturbed temperature of the ground at the average depth of the wine cellar and by the temperature of the outside air (R² varies between 0.937 and 0.974, with an average of 0.964 for the three wine cellars studied). However, the stability of the wine cellar during changes of outside temperature differs according to the time of year. In the spring and summer, the stability is excellent and the influence of the ground temperature is much greater than that of the outside air temperature (beta coefficient for the ground temperature is 0.85 compared to 0.17 for the outside air temperature). In the autumn and winter, the stability of the wine cellar is reduced by the increased ventilation, reducing the influence of the ground temperature (β = 0.70) and increasing that of the outside air (β = 0.42).     

Determination of the purple pigment in the heartwood of Dalbergia congestiflora Pittier

heartwood. It also presents the procedure applied to obtain maximum pigment extraction. Purple pigment quantification was carried out by densitometry, showing that its concentration in the heartwood of D. congestiflora amounted to approximately 4.85% of dry matter.     

Electrochemical AFM investigation of horseradish peroxidase enzyme electro-immobilization with polypyrrole conducting polymer

In this paper we investigate the nano-characterization of polypyrrole (Ppy) thin film electro-synthesized on highly oriented pyrolitic graphite (HOPG) with and without horseradish peroxidase enzyme (HRP) using Atomic force microscopy (AFM) performed in contact mode and fluid cell with electrolyte and potential control (ECAFM). In situ electro-synthesis of thin polypyrrole film was made by cyclic volt–amperommetry achieving structured Ppy nanoparticles with two types of particle sizes and the same ellipsoidal shape. Furthermore, the electro-immobilization of HRP, onto this film, was made at a fixed potential, achieving different morphology characterized by highly rough, non-homogeneous structure, and partial maintaining of the ellipsoidal particle in specific sites. The effect of polarization time on morphological parameters was studied and two mechanisms of electro-immobilization of HRP with Ppy conducting polymers were proposed.     

Structural changes in sardine (Sardina pilchardus) muscle during iced storage: Investigation by DRIFT spectroscopy

Diffuse reflectance infrared Fourier transform (DRIFT) spectroscopy has been used for the first time to evaluate the postmortem changes in structure of components from sardine muscle in relation to quality loss. Sardines (Sardina pilchardus) were stored in ice for up to thirteen days. The spectroscopic study was focussed on the structural changes produced on the lipids and proteins.     

Evaluation of barley and triticale as feed ingredients in growing Iberian pigs: amino acid and carbohydrate ileal digestibility

BACKGROUND: Iberian pig production is linked to the use of the Mediterranean woodland, where the use of local feed resources is of paramount importance for the sustainability of the system. The aim of the present work was to explore the potential of triticale cv. Camarma as compared to barley cv. Esgueva in Iberian pig feeding by studying their respective ileal digestibilities of amino acids and carbohydrates in animals cannulated at the end of the ileum. RESULTS: Leu, Met and Tyr had (P < 0.05) greater standardised ileal digestibilities (SID) in pigs fed triticale diet. There was a trend (P = 0.07) towards greater SID of Thr in pigs fed the barley diet. The least digestible indispensable amino acids were Ile (74.6% SID) for barley and Thr (78.9% SID) for triticale. Except for β‐glucans, apparent ileal digestibilities (AIDs) of individual non‐starch polysaccharide (NSP), sugars and starch were greater in pigs fed triticale (P < 0.05). Nevertheless, total amounts of NSP digested were greater in pigs fed the barley diet (P < 0.05). CONCLUSION: Overall, triticale cv. Camarma had greater amino acid and carbohydrate AID than barley cv. Esgueva and may represent a valuable grain for Iberian pig feeding. Copyright © 2008 Society of Chemical Industry     

Effect of process variables on liquid hot water pretreatment of wheat straw for bioconversion to fuel‐ethanol in a batch reactor

BACKGROUND: Crop residues as wheat straw are potential sources for fuel‐ethanol production as an alternative to current production based on starch‐ or sugar‐containing feedstocks. In this work, the effect of liquid hot water (LHW) process parameters, i.e. temperature (170 and 200 °C), residence time (0 and 40 min), solid concentration (5% and 10% (w/v)) and overpressure applied in the reactor (30 bar and no overpressure), on pretreatment of wheat straw was studied using a full factorial experimental design. Pretreatment effectiveness was evaluated based on the composition of the solid and liquid fractions obtained after filtration of pretreated material, and the susceptibility of the solid fraction to enzymatic hydrolysis (EH) using commercial cellulases. RESULTS: Statistical analysis showed that only temperature and time, within the limits of the experimental range, have a significant effect on the responses studied. While the effect of pretreatment time in hemicellulose‐derived sugar recovery in prehydrolyzate depends on temperature, EH yield was enhanced as both temperature and time were increased. Maximum EH yield was 96 g glucose per 100 g potential glucose in pretreated residue. Xylan and acetyl groups content remaining in solid residue after pretretament, which were found to be directly correlated, had a marked effect on pretreated substrate degradability. CONCLUSIONS: LHW is an effective pretreatment to enhance the potential of wheat straw as substrate for ethanol production. Maximum hemicellulose‐derived sugar recovery (53% of content in raw material) and EH yield (96% of theoretical) fall within different temperature and time intervals, suggesting separate optimization designs for these responses. Copyright © 2007 Society of Chemical Industry     

Tunnel Ventilation Analysis Using a Probabilistic Approach: Case Study,Fire in Road Tunnels with Longitudinal Ventilation

Fire Technology - Tunnels are nowadays key elements in transport networks worldwide. To achieve a safe and efficient operation, a proper integration and design of Mechanical, Electrical and...     

Spectral study and classification of worldwide locations considering several multijunction solar cell technologies

Multi‐junction solar cells are widely used in high‐concentration photovoltaic systems (HCPV) attaining the highest efficiencies in photovoltaic energy generation. This technology is more dependent on the spectral variations of the impinging Direct Normal Irradiance (DNI) than conventional photovoltaics based on silicon solar cells and consequently demands a deeper knowledge of the solar resource characteristics. This article explores the capabilities of spectral indexes, namely, spectral matching ratios (SMR), to spectrally characterize the annual irradiation reaching a particular location on the Earth and to provide the necessary information for the spectral optimization of a MJ solar cell in that location as a starting point for CPV module spectral tuning. Additionally, the relationship between such indexes and the atmosphere parameters, such as the aerosol optical depth (AOD), precipitable water (PW), and air mass (AM), is discussed using radiative transfer models such as SMARTS to generate the spectrally resolved DNI. The network of ground‐based sun and sky‐scanning radiometers AErosol RObotic NETwork (AERONET) is exploited to obtain the atmosphere parameters for a selected bunch of 34 sites worldwide. Finally, the SMR indexes are obtained for every location, and a comparative analysis is carried out for four architectures of triple junction solar cells, covering both lattice match and metamorphic technologies. The differences found among cell technologies are much less significant than among locations. Copyright © 2016 John Wiley & Sons, Ltd.     

Evolution of silicon bulk lifetime during III–V‐on‐Si multijunction solar cell epitaxial growth

The evolution of Si bulk minority carrier lifetime during the heteroepitaxial growth of III–V on Si multijunction solar cell structures via metal‐organic chemical vapor deposition (MOCVD) has been analyzed. In particular, the impact on Si lifetime resulting from the four distinct phases within the overall MOCVD‐based III–V/Si growth process were studied: (1) the Si homoepitaxial emitter/cap layer; (2) GaP heteroepitaxial nucleation; (3) bulk GaP film growth; and (4) thick GaAs_yP_1‐y compositionally graded metamorphic buffer growth. During Phase 1 (Si homoepitaxy), an approximately two order of magnitude reduction in the Si minority carrier lifetime was observed, from about 450 to ≤1 µs. However, following the GaP nucleation (Phase 2) and thicker film (Phase 3) growths, the lifetime was found to increase by about an order of magnitude. The thick GaAs_yP_1‐y graded buffer was then found to provide further recovery back to around the initial starting value. The most likely general mechanism behind the observed lifetime evolution is as follows: lifetime degradation during Si homoepitaxy because of the formation of thermally induced defects within the Si bulk, with subsequent lifetime recovery due to passivation by fast‐diffusing atomic hydrogen coming from precursor pyrolysis, especially the group‐V hydrides (PH₃, AsH₃), during the III–V growth. These results indicate that the MOCVD growth methodology used to create these target III–V/Si solar cell structures has a substantial and dynamic impact on the minority carrier lifetime within the Si substrate. Copyright © 2015 John Wiley & Sons, Ltd.     

External modulators for TeraHertz Quantum Cascade Lasers based on electrically-driven active metamaterials

We have designed, fabricated and measured electrically-driven active metamaterials which operate as external modulators for TeraHertz Quantum Cascade Lasers. The modulation is achieved by applying a voltage to the metamaterial layer which actively displaces carriers from the n-doped layer causing changes in damping and frequency location of the lowest metamaterial response. We demonstrate their operation at 2.4 and 2.8 TeraHertz and obtain a maximum modulation depth of ～60% with a large degree of modulation linearity.