The hydrometallurgical extraction of rhenium from copper industrial wastes

An attempt has been made in this investigation to develop a wet chemical method for treating a rhenium-containing lead slime produced during copper manufacture. The effects of temperature, grain size, oxygen partial pressure, and leaching time as well as the kinetics of the leaching process were studied.     

Clearance and friction-induced dynamics of chain CVT drives

A continuously variable transmission (CVT) is an emerging automotive transmission technology that offers a continuum of gear ratios between desired limits. A chain CVT is a friction-limited drive as its performance and torque capacity rely significantly on the friction characteristic of the contact patch between the chain and the pulley. Moreover, such a CVT is susceptible to clearance formation due to assembly defects or extensive continual operation of the system, which further degrades its performance and leads to early wear and failure of the system. The present research focuses on developing models to understand the influence of clearance and different friction characteristics on the dynamic performance of a chain CVT drive. A detailed planar multibody model of a chain CVT is developed in order to accurately capture the dynamics characterized by the discrete structure of the chain, which causes polygonal excitations in the system. A suitable model for clearance between the chain links is embedded into this multibody model of the chain CVT. Friction between the chain link and the pulley sheaves is modeled using different mathematical models which account for different loading scenarios. The mathematical models, the computational scheme, and the results corresponding to different loading scenarios are discussed. The results discuss the influence of friction characteristics and clearance parameters on the dynamic performance, the axial force requirements, and the torque transmitting capacity of a chain CVT drive.     

Release of proinflammatory cytokines during pediatric cardiopulmonary bypass: heparin-bonded versus nonbonded oxygenators

BACKGROUND: Heparin bonding of the cardiopulmonary bypass (CPB) circuit may be associated with a reduced inflammatory response and improved clinical outcome. The relative contribution of a heparin-bonded oxygenator (ie, >80% of circuit surface area) to these effects was assessed in a group of pediatric patients. METHODS: Twenty-one pediatric patients undergoing CPB operations were assigned randomly to receive either a heparin-bonded oxygenator (group H, n = 11) or a nonbonded oxygenator (group C, n = 10) in otherwise nonbonded circuits. The two groups were similar in pathology, age, weight, CPB time, and cross-clamp time. Plasma levels of the cytokines tumor necrosis factor-alpha, interleukin-6, and interleukin-8, as well as terminal complement complex, neutrophils, and elastase, were analyzed before, during, and after CPB. RESULTS: Significant levels of tumor necrosis factor-alpha were not detected in either group. Plasma levels of all other markers increased during and after CPB compared with baseline. Plasma levels of interleukin-6 peaked in both groups 2 hours after the administration of protamine but remained significantly higher in group C 24 hours after operation. Plasma concentrations of interleukin-8 peaked at similar levels in both groups 30 minutes after protamine administration and returned to baseline thereafter. Levels of terminal complement complex and elastase peaked in both groups 30 minutes after protamine administration. Plasma levels of terminal complement complex were significantly higher at the end of CPB and after protamine administration in group C. Elastase levels were significantly higher 2 and 24 hours after CPB in group C. The ventilation time of patients in group H was significantly lower than that of patients in group C: 10 (range, 3 to 24) versus 22 (range, 7 to 24) hours, respectively (p < 0.01). CONCLUSIONS: The present study confirms the proinflammatory nature of pediatric operations and demonstrates a lessened systemic inflammatory response with the use of heparin-bonded oxygenators. This is achieved without bonding of the entire circuit, which could have significant cost-benefit implications by negating the need for custom-built heparin-bonded circuitry.     

Investigation of Tool Wear and Surface Finish by Analyzing Vibration Signals in Turning Assab-705 Steel

Various occurrences in machining influence the machining dynamics and thus produce vibration in the cutting tool-workpiece arrangement. In this investigation, with tri-axial accelerometer mounted on the tool-holder in turning ASSAB-705 steel, vibration signals have been captured with and without cutting. The nature of vibrations arising in the cutting tool at different cutting conditions has been investigated. It has been observed that the RMS amplitude of vibration along all three axes for the increasing cutting speed was mixed in nature; however, an increasing trend was noticed in the vibrations along the feed, V_x and radial, V_y directions. The vibration along the main cutting direction, V_z was mixed, initiated by large vibration and then decreased until a particular cutting speed was reached and finally increased steadily. The feed vibration component, V_x has a similar response to the change of the workpiece surface roughness, while the other two components, V_y and V_z have the more coherent response to the rate of flank wear progression throughout the tool life. The natural frequency of different machine parts vibration has been found to be within the band of 0 Hz – 4.2 kHz, whereas the frequencies of different occurrences in turning varied between 98 Hz and 42 kHz.     

Maleated high oleic sunflower oil‐treated cellulose fiber‐based styrene butadiene rubber composites

Surface treatment of cellulose fibers was performed with maleated high oleic sunflower oil (MSOHO). The MSOHO‐treated cellulose fibers and unmodified cellulose fibers were dispersed in styrene butadiene rubber (SBR) using a two roll mill. Vapor grown carbon nanofibers (VGCNF) were also incorporated at only one parts per hundred rubber (phr) in unmodified cellulose fibers/SBR composites. The curing characteristics, mechanical properties, and water absorption of the resulting composites were determined. MSOHO‐treated fibers completed curing at much slower rate and also decreased the cure density of composites, compared to unmodified fibers. In contrast, the combination of VGCNF and unmodified cellulose fibers accelerated the SBR curing process, but reduced the cure density. MSOHO treatment improved the dispersion of the fibers in the SBR, which resulted in improved mechanical properties of composites. The composite incorporating 1 phr VGCNF and 15 phr unmodified cellulose fibers showed the greatest increase in tensile strength as compared with neat SBR. POLYM. COMPOS. 37:1113–1121, 2016. © 2014 Society of Plastics Engineers     

Synthesis,characterization, and cell viability of bifunctional medical-grade polyurethane nanofiber: Functionalization by bone inducing and bacteria ablating materials

There is an extensive possibility of improving characteristics of fibers used in hard tissue engineering, being hydrophobic and less osteoconductive, resulting in the dynamic growth of new tissues. The current work focuses on the fabrication of nanofibers incorporated with titanium dioxide (TiO₂) ''as osteoconductive'' and silver (Ag) ''as self-healing'' nanoparticles (NPs). The incorporation of AgNO₃ by in situ method not only helped to impart the antibacterial activity but also changed the contact angle from 81 ± 03° in the case of pristine nanofibers to 74 ± 03°, 61 ± 03°, 50 ± 08°, and 39 ± 1.1°, in the composite scaffolds containing 0.01, 0.03, 0.05, and 0.07 M of Ag salts. The incubation in simulated body fluid at 37°C to induce mineralization on nanofiber scaffolds indicated Ca and P crystals' formation. The antibacterial activity showed significantly more toxicity toward E. coli (8.3 ± 0.9 mm) than S. aureus (1.2 ± 0.1 mm). Biocompatibility studies using MTT assay on the pre-osteoblasts showed that both TiO₂ and Ag NPs present in the nanofibers are non-toxic to the bone-like cells. However, results show that a higher concentration of Ag NPs (i.e., 0.07 M) is toxic to cells growing. Finally, all the results suggest that the nanofiber scaffolds have considerable scope for future bone tissue engineering materials.     

Novel hybrid DNN approaches for speaker verification in emotional and stressful talking environments

Neural Computing and Applications - In this work, we conducted an empirical comparative study of the performance of text-independent speaker verification in emotional and stressful environments....     

Controlled-release naproxen using micronized ethyl cellulose by wet-granulation and solid-dispersion method

This study has been undertaken to develop a controlled-release tablet dosage form of naproxen using ethocel (ethyl cellulose) as the rate-controlling polymer. The formulations were made by employing the conventional wet-granulation method and the solid-dispersion method. Tablets made by both methods were compared for their controlled-release dissolution profiles. Both methods were useful in developing the controlled-release formulations of naproxen with desirable properties. However, the amount of polymer required to make a formulation with the desired release profile was 33% less via solid dispersion than via wet granulation. A cumulative 88% of naproxen was released from the solid-dispersion formulation, compared with 84% from the wet-granulation formulation.     

Chaos based Zero-steganography algorithm

Multimedia Tools and Applications - Conventional steganography focuses on invisibility and undetectability, as the main concern is to make the algorithms immune to steganalysis. Zero-steg-anography...