Reproducibility of plastic measurements: The need to modify State Standard GOST 1186-87

A very important characteristic of coking coal is its clinkering ability, i.e., its ability to form a nonvolatile solid residue, consisting of disparate grains, on heating in specific conditions. The clinkering ability of the coal is determined by the properties of its plastic mass. Various methods may be used to evaluate the plastic-ductile properties of the coal. However, since the 1930s, the main method used to evaluate the clinkering properties of coal, within the nations of the former Soviet Union, has been the Sapozhnikov-Bazilevich plastometric method, because it provides more information than competing approaches. For the same reason, the thickness of the plastic layer, which is one of the parameters determined by this method, is used for coal classification in State Standard GOST 25543-88 (Lignite, Coal, and Anthracite: Genetic and TEchnological Classification) and its Ukrainian counterpart DSTU 3472-96 (Lignite, Coal, and Anthracite: Classification). This explains the strict requirements on the accuracy and reliability of the plastometric characteristics.     

Study of the microstructure of ceramics from different producers used for protecting precious metal thermocouples

Results are provided for a study of the microstructure of ceramics from four different producers by means of a scanning electron microscope and x-ray microanalysis. Results show that ceramic specimens often do not correspond to claimed parameters. The main disadvantages are ceramic structural inhomogeneity, presence of phases of a different nature, intergranular pores and cracks, and alkali impurities. The ceramics of only one producer correspond to the main parameters for this class, and this is provided by high production technology and starting material quality. Translated from Novye Ogneupory, No. 7, pp. 31–35, July 2008.     

Introduction of microdoses of germanium and indium dopants into the bulk and surface layers of semiconductor materials

A technique is proposed for introducing microdoses (10^?5–10^?10 g) of germanium and indium metals into semiconductor compounds by coulometric titration in a solid electrolyte cell. The solid electrolytes that are reversible with respect to germanium cations (the GeSe-GeI₂ system containing 5 mol % GeI₂) and indium cations (the InCl₃-MgCl₂ system containing 15 mol % MgCl₂, the InCl₃-CdCl₂ system containing 1.5 mol % CdCl₂, and the In₂S₃-InCl₃ system containing 5 mol % InCl₃) are chosen, and their electric transport properties are characterized. The optimum conditions for electrochemical doping (temperature, current density), under which the current efficiency reaches 90–100%, are determined. The doping with germanium and indium is performed for nonstoichiometric compounds, such as lead monotelluride, indium sulfide, and ternary chalcogenide spinel Cd_{1 ± δ}Cr₂Se₄. The doping efficiency is controlled by measuring the electromotive force of the corresponding electrochemical cells and the Hall effect, as well as using the electrical conductivity method. The solid electrolytes that are reversible with respect to indium are used to determine the standard Gibbs energies of formation of a number of indium-containing semiconductors.     

Predeployed secure key distribution mechanisms in sensor networks: current state-of-the-art and a new approach using time information

In this article we survey a number of predeployed secure key distribution (PSKD) schemes proposed in the technical literature. We also propose a new time-based PSKD (TPSKD), which operates under the assumption of loose time synchronization, and discuss the performance of the scheme. Since the TPSKD scheme uses time information, which would typically already be available in sensor nodes, the cost of the scheme?s implementation is low.     

Influence of protein and lipid concentration of the test lubricant on the wear of ultra high molecular weight polyethylene

To gain a better understanding of the ultra-high molecular weight polyethylene (UHMWPE) wear mechanism in the physiological environment, the effects of protein and lipid constituents of synovial fluid on the specific wear rate of UHMWPE were examined experimentally. The multidirectional sliding pin-on-plate wear tester was employed to simulate the simplified sliding condition of hip joint prostheses. Bovine serum γ-globulin and synthetic l--DPPC were used as model protein and lipid constituents of synovia, respectively. Results of the wear test indicated that the UHMWPE wear rate primarily depended on the protein concentration of the test lubricant. Lipids acted as a boundary lubricant and reduced polyethylene wear in the low protein lubricants. However, the polyethylene wear rate increased with increasing lipid concentrations if the protein concentration was within the physiological level. Increased interactions between protein and lipid molecules and lipid diffusion to polyethylene surface might be responsible for the increased wear.     

A Low-Supply-Voltage CMOS Sub-Bandgap Reference

A low-power (21 $muhbox{W}$ ) bandgap reference source that is operable from a nominal supply voltage of 1.4 V is described. The circuit provides an output voltage equal to the bandgap voltage having a low output resistance and allows resistive loading. It does not use resistors or operational amplifiers. Thus, the design is suitable for fabrication in any digital CMOS technology. The circuit uses a current conveyor and current mirrors to convert the proportional to absolute temperature voltage into a current using a MOSFET. The current is converted back to a voltage by using the functional inverse of the FET $v-i$ characteristics. This makes the voltage gain linear and temperature independent. The absence of back-gate bias is the reason for achieving the low supply voltage of operation. Simulation results using the transistor models for the 0.18-$mu$m TSMC process show that the voltage-variation over the temperature range 0 to 100 $^{circ} {hbox {C}}$ is $≪$1 mV.      

Noise–Power Optimization of Incremental Data Converters

Incremental data converters (IDCs) are useful in instrumentation and measurement applications, where low-frequency analog signals need to be converted into digital form with high accuracy and low power dissipation. They are particularly well suited for applications where a single analog-digital converter is multiplexed between many channels. This paper proposes an exact design methodology for IDCs, which optimizes the signal-to-noise ratio of the converter under practical design constraints. The process also allows the designer to apportion the noise budget in an arbitrary manner between thermal and quantization noise. The design process is illustrated by an example which describes the optimization of a third-order multiplexed IDC.     

Efficient digitization of compound analog signals

The problems related to digitization of sonar compound analog sounding signals reflected from a target are considered. With the use of mathematical simulation, it is shown that, in the case of the most efficient Kotel’nikov digitization, errors occur that impede correct correlation signal processing. This difficulty can be overcome via a reduction of the sampling interval by a factor of 2 to 4 relative to the interval proposed by Kotel’nikov.     

Bistable amphoteric centers in semiconductors

It is shown that, at thermodynamic equilibrium, the release of charge carriers from the localized states of bistable amphoteric centers into quasi-free states depends on the degree of compensation. This brings about different functional dependences of the concentration of free charge carriers on temperature. It is found that, in uncompensated semiconductors, the concentration of free charge carriers follows the same dependence in the case of bistable amphoteric centers and bistable amphoteric U ^? centers, although the distributions of charge carriers over the charge states and configurations are different for these types of centers. The results can be used for interpreting various experimental data insufficiently explained in the context of the traditional approach.     

A Novel Ordered Nanopore Array Diode Laser

In this work, we have created a new type of structure, the nanopore active layer, for achieving quantization of carrier states in a semiconductor. The nanopore structure consists of a periodic two-dimensional array of localized energy barriers perturbing an otherwise conventional quantum well. This perturbation leads to the formation of intraband forbidden energy gaps which are observed experimentally.