MODELING the VIBRATIONAL RESPONSE of PLANTAIN FRUITS

Plantain fruits of the plantain subgroup ( Musa AAB Group) were obtained at a green stage and used in this study. the fruits were labelled for identification, and stored in a chamber maintained at a temperature of 20C and relative humidity of 90 ± 4%. On daily basis, for a period of 14 days, the fruits were removed from the storage chamber and each was weighed to record the mass. They were vibrated vertically on a vibration exciter through a range of frequencies from 10 to 2000 Hz. the frequency response was modeled by a single-degree-of-freedom Kelvin model. the mass of the fruit, the stiffness, the natural frequency and the critical damping all decreased significantly (p < 0.01) with storage time. There was no significant change (p > 0.05) in the damping coefficient of the fruit. the damping ratio decreased significantly (p < 0.01) with storage time. the models that described the changes in these parameters with storage time were obtained by stepwise regression, and are also presented. It was concluded that a single degree-of-freedom model provides satisfactory results of the vibrational characteristics of intact plantain fruit.     

Apparent diffusion coefficient determination of sodium hydroxide through potato skin and flesh under different temperatures and concentration conditions

The aims of the present study were to analyze the most important chemical reactions between sodium hydroxide and potato constituents involved in potato chemical peeling, and to measure the apparent diffusivity of NaOH in potato skin and flesh separately, as a function of temperature and NaOH concentration, selected according to potato chemical peeling process. Chemical reaction of the suberin of the potato skin with NaOH was proposed as the most important one to promote chemical peeling. Whereas starch hydrolysis, middle lamella dissolution and cell wall disruptions were proposed as the principal chemical reactions in flesh. Experiments to determine NaOH apparent dijfusivities in skin and flesh were performed following a cell diffusion method at 25, 40, 50, 60 and 70 °C temperatures and concentrations of 4, 12 and 20 g NaOH/100 g of solution. Finally, correlation equations were determined to describe apparent diffusivity dependence on temperature and concentration.     

Consumer knowledge of foodborne microbial hazards and food-handling practices.

A national telephone survey was conducted of 1,620 randomly selected U.S. residents who spoke English, were at least 18 years old, and resided in households with kitchen facilities. Respondents were interviewed about their recognition of foodborne pathogens, foods at risk for transmitting infection, knowledge of safe food handling, and food-handling practices. One-third of the respondents who prepared meals reported unsafe food hygiene practices: e.g., they did not wash hands or take precautions to prevent cross-contamination from raw meat. Unsafe practices were reported more often by men, adults 18 to 29 years of age, and occasional food preparers than by women, persons 30 years old or older, and frequent food preparers. Respondents who identified a food vehicle for Salmonella spp. were more likely to report washing their hands and cleaning cutting boards after preparing raw meat and poultry. The results raise concerns about consumer food-handling practices. The influence of food safety training, food-handling experience, and age on food-handling practices should be studied further. Awareness of a food vehicle for Salmonella spp., for example, may indicate knowledge of the etiology of foodborne disease that promotes safe food handling. Understanding the factors associated with safe food handling will assist in development of effective safe-food instruction programs.     

Development of a new advanced process for manufacturing polyacetal resins. Part III. End-capping during polymerization for manufacturing acetal homopolymer and copolymer

Conventionally, acetal homopolymer or copolymer is obtained by the polymerization of formaldehyde or trioxane, following the end-capping using acetic anhydride or unzipping of the unstable polymer end fraction. First, Asahi Chemical developed a new process to obtain an end-capped polymer during polymerization of highly purified formaldehyde using acetic anhydride as the chain-transfer agent. Use of highly purified formaldehyde and endcapping during polymerization using acetic anhydride as a chain-transfer agent or an endcapping agent will provide a simple process for manufacturing acetal homopolymer. The polymerization mechanism was confirmed by infrared spectroscopy analysis and proton NMR analysis of the polymer obtained. Second, for the acetal copolymer, purified trioxane was copolymerized with ethylene oxide in the presence of methylal, which gave an endcapped polymer with high thermal stability. Two new intermediates from the initiation reaction of the copolymerization, 1,3,5,7-tetraoxacyclononane (TOCN) and 1,3,5,7,10-pentaoxacyclododecane (POCD), were isolated and a new initiation mechanism was proposed. © 1993 John Wiley & Sons, Inc.     

Evaluation of reactive power meters in the presence of highharmonic distortion

Four reactive power meters, operating on different principles, were tested under nonsinusoidal conditions. Different definitions of the reactive power are discussed. Because the definition and meaning of the nonsinusoidal reactive power are still being actively debated, the readings of the tested meters were compared with four nonsinusoidal reactive powers and the first harmonic reactive power, to verify whether these readings can be interpreted as approximate measures of the different definitions. A digital instrument, programmed to measure each of these powers, was used as a reference     

Four-noded mixed finite elements,using unsymmetric stresses,for linear analysis of membranes

A family of new 4-noded membrane elements with drilling degrees of freedom and unsymmetric assumed stresses is presented; it is derived from a mixed variational principle originally formulated for finite strain analysis and already used in the literature to develop a purely kinematic membrane model. The performance of these elements, investigated through some well established benchmark problems, is found to be fairly good and their accuracy is comparable with that given by models with a larger number of nodal parameters.