The Italian national survey of indoor radon exposure

An investigation is being developed by the Camitato Nazionale per la Ricerca e per lo Sviluppo dell'Energia Nucleare e delle Energie Alternative, ENEA, to assess the indoor exposure of the Italian population. The programme, which started in 1982, includes regional and local surveys in all the administrative districts and intensive investigations of factors which influence indoor radon levels. The survey is organized by statistical areas of sampling to obtain representative samples of houses. The definition of the areas takes into account basic parameters e.g. geolithological environments, radon soil gas from underlying soils and rocks, specific activities of local building materials, climatic and seasonal variations, building technology, types of houses and town planning. The collected data may also be used for the compilation of radon risk maps to plan special monitoring and remedial actions if needed. Preliminary results concerning the above items are discussed.     

Buckling of tube-stiffened prolate domes under external water pressure

The paper describes experimental tests carried out on three tube-stiffened prolate hemi-ellipsoidal domes under external water pressure.The tubes were stuck to the internal surfaces of these three domes, in their flanks, and the experimental tests showed that the tubes increased the buckling pressures of these domes, especially in one case, when the tube was subjected to an initial internal pressure.All three domes failed by lobar buckling, in their flanks, and showed buckling resistances much larger than similar unstiffened domes.     

Prediction of the effectiveness of rolling dynamic compaction using artificial neural networks and cone penetration test data

Rolling Dynamic Compaction(RDC),which is a ground improvement technique involving non-circular modules drawn behind a tractor,has provided the construction industry with an improved ground compaction capability,especially with respect to a greater influence depth and a higher speed of compaction,resulting in increased productivity. However,to date,there is no reliable method to predict the effectiveness of RDC in a range of ground conditions. This paper presents a new and unique predictive tool developed by means of artificial neural networks(ANNs) that permits a priori prediction of density improvement resulting from a range of ground improvement projects that employed 4-sided RDC modules;commercially known as"impact rollers". The strong coefficient of correlation(i.e. R0.86) and the parametric behavior achieved in this study indicate that the model is successful in providing reliable predictions of the effectiveness of RDC in various ground conditions.     

Smoke development at different energy flux levels in an NBS smoke density chamber

An automatically controlled high-energy flux heater has been developed and utilized in an NBS Smoke Density Chamber.     

Arsenic-sulfides confound anion exchange resin speciation of aqueous arsenic

A field-portable anion exchange resin method (often cited as the Ficklin method (1983)) has been extensively used to distinguish between dissolved arsenite (As(III)) and arsenate (As(V)) species in natural waters. As(III) occurs largely as As(OH)(3), which is uncharged at ca. pH 7, while As(V) is negatively charged and will sorb to the resin. However, we show that negatively charged As(III)-sulfide (thioarsenite) species, important at sulfide concentrations >10 microM, also bind to the anion exchange resins, and therefore might be interpreted incorrectly as As(V). Furthermore, we show that nitrogen-purging, which results in a conversion of As(III)-sulfides to arsenite, can be used to obtain accurate arsenic speciation when resins are used on sulfidic water samples.     

The coagulation of a kaolinite suspension with aluminium sulphate

A study has been made of the coagulation of a 50 mg l⁻¹ aqueous suspension of kaolinite for a range of aluminium sulphate and hydrogen ion concentrations. The rate of flocculation was determined from jar tests after stirring for 1 h. The data permitted a stability limit diagram to be drawn from which some indication of the coagulation mechanisms of the system could be ascertained.     

Laboruntersuchungen zur Freisetzung von Unat aus einem Gestein unter oxischen naturnahen Bedingungen

Kurzfassung Im Labor wurden verschiedene Größen (pH-Wert, HCO ₃ —Gehalt, Präsenz von Fe(OH) ₃ ) untersucht, von denen angenommen werden konnte, dass sie die umweltrelevante Freisetzung von Uran aus Gesteinen (z. B. Haufwerken, Halden, Tailings) im neutralen und schwach basischen pH-Bereich (6 bis 9) beeinflussen. Hierzu wurde der Austrag von U _nat aus einem schwach vererzten Urangestein (2,31 %) in Batchversuchen untersucht. Diese Versuche wurden mit 8, 10 oder 40 g/l Gestein und Leitungs- bzw. Mineralwasser durchgeführt. Zum Vergleich wurden parallele Standversuche in deionisiertem Wasser, 0,1 M Na ₂ CO ₃ und 0,1 M H ₂ SO ₄ durchgeführt. Die Ergebnisse zeigen eine Begünstigung der Uranfreisetzung in Anwesenheit von Carbonat (gelöst oder in situ durch Dolomitauflösung entstanden), während die Rolle des Pyrits auf die Freisetzung deutlich komplexer ist. Das Erreichen eines Gleichgewichtszustands kann unter Umständen durch sorptive Einflüsse verzögert werden.

---

Investigations for the release of U_nat from ore bearing rock under natural near oxic conditions

Abstract The effects of carbonate concentration and the presence of iron hydroxide phases on uranium release into the environment were investigated under oxic conditions and in the pH range from 6 to 9. For this purpose not-shaken batch experiments were conducted with a constant amount (8, 10 or 40 g/l) of a uranium bearing rock and different types of water (deionised, tap and mineral water). For comparison parallel experiments were conducted with 0.1 M Na ₂ CO ₃ and 0.1 M H ₂ SO ₄ . The use of dolomite confirmed the favourable role of carbonate bearing minerals for U transport while the presence of pyrite on Uranium mobilisation was shown to be considerably more complex. This study shows that the approach of equilibrium conditions can be strongly delayed by sorption processes.

     

Reliability of corrosion-damaged steel structures using interval probability theory

Engineering decisions concerning the performance of existing structures must be made in the presence of uncertainties. The remaining capacity of corroded steel structures provides a good example of different aspects of uncertainty. These include: an unknown or partially known extent of damage; a variability in loading and an uncertain reserve of structural capacity depending on the mode of failure. The theory of structural reliability has been developed to provide a method of analysis for structural safety. In this paper, methods are proposed to compute the component reliability of corrosion-damaged steel members. The application of a recently developed theory called interval probability theory for system reliability is illustrated using the data obtained from actual samples of corroded beams.     

Gravity driven counterflow through an open door in a sealed room

Flow measurements using tracer gas techniques were made on the exterior doorway of a test house for indoor-outdoor temperature differences of 0.5–45 K. The time for door opening and closing was constant at 3.75 s, and fully open hold time varied from 0.5 s to 120 s. Predictions of a variable density steady flow model were in good agreement with the measurements when adjustments were made for the time-varying size of the opening and for the effect of cross-stream mixing between the incoming and outgoing air streams. The flow rate is shown to be governed by an effective density very close to the average of inflow and outflow densities, and the control condition at the doorway is fixed by the jet-like behavior of the inflow stream. Dependence of cross-stream mixing on interfacial stability caused the orifice and coefficient to increase from 0.4 to 0.6 as temperature difference increased. This varying orifice coefficient is well represented by the combination of a discharge coefficient for streamline contraction combined with a mixing coefficient which accounts for mixing between the inflow and outflow.