Synthesis,Surface Properties and Effect of an Amino Acid Head Group of 11-(2-Methoxy-4-vinylphenoxy)undecanoicacid-Based Anionic Surfactants

Our present research describes the surface properties of three biobased anionic surfactant synthesized from vinylguaiacol and 11-bromo undecanoic acid. To further improve its hydrophobicity and bioavailability, amino acid head group incorporation was carried out. All these synthesized compounds were thoroughly characterized using NMR and mass spectroscopy. The performance properties such as foaming, wetting, emulsification value and calcium tolerance were evaluated. The studied surfactants possess excellent emulsion stability and moderate calcium tolerance as compared to commercially available surfactant sodium lauryl sulfate (SLS). The micelle formation and the thermodynamics involved at the air–water interface were estimated from surface tension measurements. These surfactants showed a higher tendency towards adsorption at the air–water interface than micellization. Dynamic light scattering and steady state fluorescence anisotropy study were carried out to shed light on the bulk micellization properties of the synthesized surfactant. Along with spherical micelles of <5 nm size, larger aggregates (35–84 nm) were observed with higher anisotropy values. FESEM images further confirmed the larger spherical micelles formed by these surfactants. The surfactants formed chiral aggregates above the critical micelle concentration as indicated by circular dichroism spectra. These surfactants may be suitable candidates for additives to detergents to improve their calcium tolerance especially in the case of hard water. Furthermore, a low foaming ability along with high emulsion stability may find these surfactants to be better replacement of the conventional surfactant used as emulsifiers in many industrial applications.     

Binning algorithm for high-resolution IRS-P4 OCM chlorophyll image

Daily chlorophyll-a concentration from the Ocean Colour Monitor (OCM) sensor onboard the Indian Remote Sensing satellite (IRS-P4) is used to make weekly and monthly chlorophyll-a concentration maps. The pathwise swath data at 12 noon for every alternate day over the north Indian Ocean (NIO) during February 2004 and February 2005 were used to compare the existing algorithms for binning the data. Atmospherically corrected and geocorrected OCM data were used in the comparative study of three averaging algorithms – arithmetic mean (AVG), geometric mean (GEO) and maximum likelihood estimator (MLE). The analysis shows that the AVG algorithm is best suited when compared with the two other algorithms. However, for case 1 water, MLE gives nearly the same value as AVG. Based on this result, AVG was selected for operational weekly and monthly averaging of OCM data over the NIO. These high-resolution-derived chlorophyll-a weekly and monthly products will be useful to resolve inter-annual-to-decadal changes in chlorophyll-a concentration over the NIO.     

Generalized hybrid control synthesis for affine systems using sequential adaptive networks

BACKGROUND: A generalized methodology for the synthesis of a hybrid controller for affine systems using sequential adaptive networks (SAN) is presented. SAN consists of an assembly of neural networks that are ordered in a chronological sequence, with one network assigned to each sampling interval. Using a suitable process model based on oxygen metabolism and an a priori objective function, a hybrid control law is derived that can use online measurements and the states predicted by SAN for computing the desired control action. RESULTS: The performance of the SAN–hybrid controller is tested for simulated fed‐batch production of methionine for three different process conditions. Simulations assume that online measurements of dissolved oxygen (DO) concentration are available. The performance of the SAN–hybrid controller gave an NRMSE of ～10^?4 in the absence of noise, ～10^?3 and ～10^?2 for ± 5% and ± 10% noise in the DO measurement and ～10^?2 for parameter uncertainty when compared with the ideal model prediction. CONCLUSIONS: The observed performance for unmeasured state prediction and control implementation shows that the proposed SAN–hybrid controller can efficiently compute the manipulated variable required to maintain methionine production along the optimized trajectory for different conditions. The test results show that the SAN–hybrid controller can be used for online real‐time implementation in fed‐batch bioprocesses. Copyright © 2009 Society of Chemical Industry     

Experimental Result on Heat Transfer during Quenching of Hot Steel Plate by Spray Impingement

The present article discusses the experimental results on cooling characteristics of a stationary hot steel plate by spray impingement. The experimental setup consisted of an electrically heated flat stationary steel plate of dimension 120 mm × 120 mm × 4 mm, spray setup, water supply, and air supply unit. The effects of various controlling parameters such as air-water pressures, water flow rate, nozzle tip to target distance and impingement density were determined and analyzed. The cooling rates were computed from the time-dependent temperature history and used to analyze the parametric effects. The results obtained in the study confirmed the higher efficiency of the spray cooling system and the cooling strategy was found advantageous over the conventional cooling methods available in the open literature.     

Effect of Nanoclay on the Mechanical,Thermal, and Water Absorption Properties of an UP-toughened Epoxy Network

Unsaturated polyester (UP)-toughened epoxy nanocomposites were prepared, and their effective mechanical and thermal properties were studied. Two types of organo-modified montmorillonite (OMMT) clays were used to prepare the nanocomposites. X-ray diffraction (XRD) and transmission electron microscopy (TEM) analysis showed the formation of exfoliated silicate layers in the UP-toughened epoxy matrix. Mechanical tests revealed that nanocomposites (containing 1 wt% OMMT clay) showed an increase in tensile strength to 13.8%, flexural strength to 10%, and impact strength to 4% compared with an UP-toughened epoxy blend. The effect of different heating rates on the curing behavior of UP-toughened epoxy nanocomposites was investigated using non-isothermal differential scanning calorimetry. The data were interpreted using the Kissinger and Flynn–Wall–Ozawa models to find the curing reaction parameter. The water uptake behavior for nanocomposites increased with the addition of OMMTs. Scanning electron microscopy micrographs indicated morphological changes in the impact fractured samples of UP-toughened epoxy nanocomposites.     

Voltammetric Response and Determination of an Anti-Inflammatory Drug at a Cationic Surfactant-Modified Glassy Carbon Electrode

Electrochemical oxidation of thiosalicylic acid in the presence of cationic surfactant, cetyl trimethylammonium bromide (CTAB), at a glassy carbon electrode was investigated. The electrochemical response of a modified sensor towards thiosalicylic acid determination was studied by the means of cyclic voltammetry, linear sweep voltammetry and differential pulse voltammetry (DPV). The liquid phase oxidation of thiosalicylic acid in the presence of CTAB leads to a notable enhancement in the peak current and a lowering of the peak potential. The electrochemical process was observed to be adsorption-controlled, irreversible and involves oxidation of one electron. Effects of anodic peak potential (E _p), anodic peak current (I _pa) and heterogeneous rate constant (k ⁰) were calculated. The linear response was obtained in the range of 1.0 µM–1.0 mM with a detection limit of 113 nM.     

Development of topical gel containing aceclofenac-crospovidone solid dispersion by “Quality by Design (QbD)” approach

This article describes the development, optimization, and evaluation of Carbopol 940 topical gel containing aceclofenac-crospovidone (1:4) solid dispersion using “Quality by Design (QbD)” approach based on 2³ factorial design. The effect of crospovidone, tri-ethanolamine, and ethyl alcohol amount on the drug permeation profile of the topical gel containing aceclofenac-crospovidone solid dispersion was optimized by 2³ factorial design. The optimized gel showed improved permeation profile with cumulative drug permeation of 26.262 ± 2.157%, and permeation flux of 0.059 ± 0.011 μg/cm²/h. These gels were characterized by pH, viscosity, gel strength and FTIR study. The in vivo anti-inflammatory activity of the optimized gel was evaluated in rats using carrageenan-induced rat-paw oedema model and found excellent anti-inflammatory comparable with a marketed gel without producing any skin irritation.     

Analytical study of nuclear-coupled density-wave instability in a natural circulation pressure tube type boiling water reactor

An analytical model has been developed to study the nuclear-coupled density-wave instability in the Indian advanced heavy water reactor (AHWR) which is a natural circulation pressure tube type boiling water reactor. The model considers a point kinetics model for the neutron dynamics and a lumped parameter model for the fuel thermal dynamics along with the conservation equations of mass, momentum and energy and equation of state for the coolant. In addition, to study the effect of neutron interactions between different parts of the core, the model considers a coupled multipoint kinetics equation in place of simple point kinetics equation. Linear stability theory was applied to reveal the instability of in-phase and out-of-phase modes in the boiling channels of the AHWR. The results indicate that the stability behavior of the reactor is greatly influenced by the void reactivity coefficient, fuel time constant, radial power distribution and channel inlet orificing. The delayed neutrons were found to have a strong influence on the Type I and Type II instabilities observed at low and high channel powers, respectively. Also, it was found that the coupled multipoint kinetics model and the modal point kinetics model predict the same threshold power for out-of-phase instability if the coupling coefficient in the former model is half the eigen value separation between the fundamental and the first harmonic mode in the latter model. Decay ratio maps were predicted considering various operating parameters of the reactor, which are useful for its design.     

Electrochemical inspection of polypyrrole/chitosan/zinc oxide hybrid composites

Polymer nanocomposite composed of polypyrrole, chitosan, and zinc oxide nanoparticles has been synthesized and it has been evaluated for various electrochemical aspects of the current electrochemical industry. The polypyrrole (PPy) was synthesized by the chemical oxidative polymerization reaction by employing ammonium persulfate as oxidizing agent. Composites of polypyrrole/chitosan (PPy/Chy) and polypyrrole/chitosan/ZnO (PCZ) composites were synthesized by the solution blending method. Detailed structural, morphological, thermal characterization of PPy, PPy/Chy, and PCZ were performed to characterize the specific features of the systems. The composites exhibit better thermal stability and high surface area and the addition of ZnO nanoparticle increase the crystallinity of the composite. Electrochemical characterization of the ITO electrodes modified with PPy, PPy/Chy, and PCZ were performed using cyclic voltammetry, electrochemical impedance spectroscopy, and amperometry techniques. The present study highlights the role of a bio-compatible material with high surface area and conductive constituent for designing of various high performing electronic noninvasive sensors, biosensors, and so forth.     

Composition and Recyclability Analysis of Poly(Vinyl Chloride) Recovered from Computer Power Cables and Commercial Wires

The product‐based recycling of the electrical and electronic devices and their by‐products are limited due to their complex characteristics and dissimilar material characteristics. However, such recycling procedures give clear ideas about the composition and possible recycling options of the materials present in them. Consequently, the present study deals with isolation and recycling of the major polymeric fraction present in the waste computer power supply cables (CPS) and electrical power supply (EPS) wires isolated from the household items. The composition analysis of CPS and EPS indicates that the poly(vinyl chloride) (PVC) is the major polymeric fraction along with minor content of polyethylene (PE) and polycarbonate (PC). Further, this research compares the mechanical recyclability of the PVC recovered from the CPS and EPS. Among the PVC's analyzed, PVC isolated from the EPS has been indicated superior mechanical properties. Similarly, thermal degradation analysis (TGA) indicated higher thermal stability for the PVC isolated from EPS. Besides, the flammability of the PVC specimens was studied and concluded with the possible mechanism occurring during combustion. Moreover, this study points out that PVC recovered from EPS and CPS can be mechanically recycled for the elimination of the waste. J. VINYL ADDIT. TECHNOL., 26:213–223, 2020. © 2019 Society of Plastics Engineers