Molecular analysis of the adaptive response of intestinal bile acid transport after ileal resection in the rat

OBJECTIVES: Major operative trauma like aorta-coronary bypass operation may lead to postoperative immunodisturbance, putting the patient at an increased risk for infection and sepsis. The monocyte/macrophage system and the endotoxin receptor CD14 are important in the early recognition and elimination of invading bacteria. The aim of this study was to analyze changes in membrane-associated CD14 and soluble CD14 during and after cardiac involving cardiopulmonary bypass. METHODS: We studied numbers of leukocytes, monocytes, and monocyte subpopulations, expression of monocyte membrane-associated CD14 and plasma levels of soluble CD14 in 10 patients (63 +/- 8 years of age), who underwent elective cardiopulmonary bypass. RESULTS: Cardiopulmonary bypass induced marked postoperative monocytosis, which was maximal 20 hours after the operation (485 +/- 242 cells/microl before, 1080 +/- 264 cells/microl 20 hours after surgery). Expression of membrane-associated CD14 on classical CD14++ monocytes decreased significantly by 40%, reaching a nadir 20 hours after surgery (p < 0.05). At the time of maximal membrane-associated CD14 suppression, the levels of soluble CD14 measured by enzyme-linked immunosorbent assay were clearly increased (3.2 +/- 1.0 microg/ml before versus 5.6 +/- 1.0 microg/ml 20 hours after, p < 0.001). No significant change of the percentage of small (alpha) and large (beta) forms of soluble CD14 was found. CONCLUSIONS: Cardiopulmonary bypass leads to reduced membrane-associated CD14 expression on peripheral blood monocytes and increased levels of soluble CD14 through shedding or secretion of membrane-associated CD14 from the cell surface. These findings indicate that bypass is associated with significant monocyte activation.     

Effect of Joint Thickness and Residual Stresses on the Properties of Ceramic Adhesive Joints: I, Finite Element Analysis of Stresses in Joints

The finite element method was used to determine the stress distributions in adhesive joints prepared using alumina adher-ends and silicate glass adhesives with varying thicknesses and thermal expansion coefficients. These analyses, together with the results of literature analyses for joints subjected to externally applied loads, aided in interpreting the experimental observations which are described in Part II of the paper.     

Subsolidus Phase Equilibria in the System SrO-B2O3-SiO2

The subsolidus compatibility relations in the system SrO-B₂O₃- SiO₂ were determined by solid-state reaction techniques and X-ray powder diffraction methods. The system was found to contain 11 subsolidus compatibility relations, one stable ternary compound (Sr₃B₂SiO₈), and one metastable ternary compound with a probable composition SrB₂Si₂O₈.     

Elastic and Anelastic Response of Polycrystalline UO2-PuO2

A sonic resonance technique was used to investigate the room-temperature elastic and anelastic properties of physically mixed U_0.8PU_0.2O₂ as a function of density, stoichiometry, and cation homogeneity. The effect of porosity on the elastic moduli was linear and is described by E =2102.7 (1–2.03 P )± 13.5 Kbars for the Young's modulus, G =823.5(1–2.05 P )± 9.1 kbars for the shear modulus, and B = 1584.8(1–1.89 P )± 59.1 kbars for the bulk modulus, where P is the volume fraction porosity. Poisson's ratio was 0.28 and was not a function of porosity. The Debye temperature of U_0.8Pu_0.2O₂ computed from the Young's and shear moduli for theoretically dense specimens was 379°K. Variation of the O/M ratio from 1.968 to 2.006 produced no significant change in either the damping capacity or the elastic moduli of single-phase 80%UO₂-20% PuO₂ solid solutions. An approximate 24% decrease of the room-temperature Young's and shear moduli and an approximate increase by a factor of 14 in the internal friction were observed with gross modifications of plutonium cation homogeneity. Preliminary results suggest that internal friction measurements might be used to assay the homogeneity of UO₂-PuO₂ solid solutions.     

Phytic Acid Determination in Soybeans

Several established methods of phytic acid determination in soybeans were evaluated. Iron analysis methods, which rely on a 4:6 molar ratio of Fe:P, were eliminated because this ratio was not dependable. Three assay methods relying on phosphorus analysis were then compared. The anion-exchange method was considered most accurate but not convenient for routine analysis. Analysis of the ferric phytate precipitate and a new method, analysis of the supernatant before and after ferric chloride precipitation, were judged against the anion-exchange method under different extraction conditions. Based upon good agreement with anion-exchange column results and acceptable reproducibility, the best methods were (1) precipitate analysis of phosphorus after extraction with 3% TCA + 10% sodium sulfate, or (2) the supernatant difference method after extraction with 1.2% HCl.     

AN ANALYSIS OF PHASE DISTRIBUTION AND TURBULENCE IN DISPERSED PARTICLE/LIQUID FLOWS

An analysis of dilute, turbulent particle/liquid two-phase flow is presented. The three-dimensional conservation equations that govern turbulent motion in solid/fluid flows are derived using ensemble averaging, and the unknown terms in these equations are constituted to achieve closure. These closure terms include the shear stress due to interparticle collisions, the corresponding terms in the Reynolds stress equation, the force and dissipation due to particle-wall collisions, and the interfacial work due to particle/turbulent eddy interaction. The resultant two-fluid model was then evaluated using a computational fluid dynamic (CFD) solver and the predictions were compared with experimental data. Good agreement was observed for a variety of flow conditions.     

粗纤维素酶液对微晶纤维素酶解的影响因素

栗生灰黑孔菌多被用于产漆酶的研究,很少有利用其纤维素酶的报道。为了降低在纤维素水解中纤维素酶的使用成本,利用栗生灰黑孔菌发酵制备的粗纤维素酶液,以微晶纤维素为底物模型,研究粗纤维素酶液水解微晶纤维素的最佳pH、温度和最佳表面活性剂助剂种类及浓度,并对不同表面活性剂存在条件下的纤维素酶解动力学、紫外和荧光光谱进行了研究。结果表明,粗纤维素酶水解微晶纤维素的最佳条件为pH 4.8,温度50℃,最佳表面活性剂助剂为吐温80,添加剂量为1.12mg/g底物;吐温80的添加可提高粗纤维素酶解的最大反应速度常数V_max,降低米氏常数K_m;表面活性剂改变了纤维素酶的紫外和荧光最大吸收峰,酰胺Ⅰ带和酰胺Ⅲ带的谱峰,可能通过与纤维素酶中的氨基酸残基发生反应影响了纤维素酶的结构,进而影响了微晶纤维素的水解反应。该研究为进一步降低纤维素水解成本提供了理论指导。     

A NEW TOOL FOR NUCLEATE BOILING RESEARCH

A new tool for the study of nucleate boiling heat transfer has been developed. Photographic etching was shown to be effective in the manufacture of copper lest surfaces containing precise arrays of artificial pits, with densities as high as 2742 pits/cm².

The pits were shallow segments of spheres, with depth: diameter ratios on the order of 0.1. Pit diameters were on the order of 0.003 cm. Data showed that the pits significantly affected the characteristic boiling curves and critical fluxes for the surfaces studied while boiling Freon 113 at one atmosphere pressure.

Photoetching can be used in the future to produce a wide variety of test surface textures or site arrays. Careful control of such surface conditions may well lead to a better understanding of the nucleate boiling phenomena.     

EFFECT OF CONTAMINANTS ON CRITICAL HEAT FLUX AT LOW PRESSURES

Critical heat flux (CHF) tests were performed to evaluate the effect of dissolved, nonreactive contaminants on low-pressure industrial boilers. These tests were conducted on a 2.38-inch (60.5 mm) I.D. vertical smooth bore tube with nonuniform circumferential heating at pressures between 100 and 500 psia (0.69 and 3.45 MPa). Tests were performed under two water chemistry conditions: clean (less than 1.6 ppm total dissolved solids) and contaminated (greater than 2000 ppm TDS). With all other operating parameters held constant, the following effects of contamination on the steam quality (X) at CHF were determined at the pressures indicated:

At 100 psia (0.69 MPa) X_clean < X_cont

At 300 psia (2.1 MPa) X_clean?X_cont

At 500 psia (3.5 MPa) X_clean > X_cont

The effect of contamination on CHF was found to be a function of pressure, initial contaminant concentration, and the relative steam quality at which CHF conditions occur. These results are compared to data available in the open literature where X_clean is always greater than X_cont. A method for correlating these data is also illustrated.     

A NONDESTRUCTIVE METHOD TO MEASURE RESIDUAL ADSORPTION CAPACITY OF CHARCOAL FILTERS

High surface area charcoal bed filters have been used for over a half a century to adsorb undesirable vapors from gas streams. One problem encountered when using these niter beds is that there is presently no simple, reliable, nondestructive method to measure their Residual Adsorption Capacity, RAC. This is particularly critical in situations where harmful vapors are being adsorbed.

An investigation has been underway to use pulses of weakly adsorbed gases such as ethane and/or methane to measure RAC. The hypothesis being that these weakly adsorbed gases will “count” unoccupied adsorption sites. In the present study, dimethyl methylphosphonate (DMMP) was used to “irreversibly” occupy available siles to various extents on different niters. The Reduced Retention Time. θ, (the ratio of the adjusted retention time to the space time) and the Resolution (R) between peaks of methane and ethane were found to correlate to RAC under dry and wet (humid) conditions.