Power- and time-aware buffer cache management for real-time embedded databases

Due to the explosive increases of data from both the cyber and physical worlds, the demand for database support in embedded systems is increasing. Databases for embedded systems, or embedded databases, are expected to provide timely in situ data services under various resource constraints, such as limited energy. However, traditional buffer cache management schemes, in which the primary goal is to minimize the number of I/O operations, is problematic since they do not consider the constraints of modern embedded devices such as limited energy and distinctive underlying storage. In particular, due to asymmetric read/write characteristics of flash memory-based storage of modern embedded devices, minimum buffer cache misses neither coincide with minimum power consumption nor minimum I/O deadline misses. In this paper we propose a novel power- and time-aware buffer cache management scheme for embedded databases. A novel multi-dimensional feedback control architecture is proposed and the characteristics of underlying storage of modern embedded devices is exploited for the simultaneous support of the desired I/O power consumption and the I/O deadline miss ratio. We have shown through an extensive simulation that our approach satisfies both power and timing requirements in I/O operations under a variety of workloads while consuming significantly smaller buffer space than baseline approaches.     

Minimal-drift heading measurement using a MEMS gyro for mobile robots: Fused with odometry

To achieve the goal of low-cost MEMS gyros for the precise self-localization of mobile robots, this paper presents a simple, yet effective method to minimize drifts on the heading angle by combining measurements from a gyro with measurements from wheel encoders (odometry). The main idea of the proposed approach is to estimate the accuracy of both sensors as a function of the actual maneuver being carried out, and then the output of both sensors are fused by the complementary filter taking into account the maneuvering conditions. The proposed method is applied to a mobile robot and the experimental data demonstrate the effectiveness of this approach.     

Identification of Cyclophilin A as a Potential Anticancer Target of Novel Nargenicin A1 Analog in AGS Gastric Cancer Cells

We recently discovered a novel nargenicin A1 analog, 23-demethyl 8,13-deoxynargenicin (compound 9), with potential anti-cancer and anti-angiogenic activities against human gastric adenocarcinoma (AGS) cells. To identify the key molecular targets of compound 9, that are responsible for its biological activities, the changes in proteome expression in AGS cells following compound 9 treatment were analyzed using two-dimensional gel electrophoresis (2-DE), followed by MALDI/TOF/MS. Analyses using chemical proteomics and western blotting revealed that compound 9 treatment significantly suppressed the expression of cyclophilin A (CypA), a member of the immunophilin family. Furthermore, compound 9 downregulated CD147-mediated mitogen-activated protein kinase (MAPK) signaling pathway, including c-Jun N-terminal kinase (JNK) and extracellular signal-regulated protein kinase 1/2 (ERK1/2) by inhibiting the expression of CD147, the cellular receptor of CypA. Notably, the responses of AGS cells to CypA knockdown were significantly correlated with the anticancer and antiangiogenic effects of compound 9. CypA siRNAs reduced the expression of CD147 and phosphorylation of JNK and ERK1/2. In addition, the suppressive effects of CypA siRNAs on proliferation, migration, invasion, and angiogenesis induction of AGS cells were associated with G2/M cell cycle arrest, caspase-mediated apoptosis, inhibition of MMP-9 and MMP-2 expression, inactivation of PI3K/AKT/mTOR pathway, and inhibition of hypoxia-inducible factor-1α (HIF-1α) and vascular endothelial growth factor (VEGF) expression. The specific interaction between compound 9 and CypA was also confirmed using the drug affinity responsive target stability (DARTS) and cellular thermal shift assay (CETSA) approaches. Moreover, in silico docking analysis revealed that the structure of compound 9 was a good fit for the cyclosporin A binding cavity of CypA. Collectively, these findings provide a novel molecular basis for compound 9-mediated suppression of gastric cancer progression through the targeting of CypA.     

Attenuating Effects of Dieckol on Hypertensive Nephropathy in Spontaneously Hypertensive Rats

Hypertension induces renal fibrosis or tubular interstitial fibrosis, which eventually results in end-stage renal disease. Epithelial-to-mesenchymal transition (EMT) is one of the underlying mechanisms of renal fibrosis. Though previous studies showed that Ecklonia cava extracts (ECE) and dieckol (DK) had inhibitory action on angiotensin (Ang) I-converting enzyme, which converts Ang I to Ang II. It is known that Ang II is involved in renal fibrosis; however, it was not evaluated whether ECE or DK attenuated hypertensive nephropathy by decreasing EMT. In this study, the effect of ECE and DK on decreasing Ang II and its down signal pathway of angiotensin type 1 receptor (AT1R)/TGFβ/SMAD, which is related with the EMT and restoring renal function in spontaneously hypertensive rats (SHRs), was investigated. Either ECE or DK significantly decreased the serum level of Ang II in the SHRs. Moreover, the renal expression of AT1R/TGFβ/SMAD was decreased by the administration of either ECE or DK. The mesenchymal cell markers in the kidney of SHRs was significantly decreased by ECE or DK. The fibrotic tissue of the kidney of SHRs was also significantly decreased by ECE or DK. The ratio of urine albumin/creatinine of SHRs was significantly decreased by ECE or DK. Overall, the results of this study indicate that ECE and DK decreased the serum levels of Ang II and expression of AT1R/TGFβ/SMAD, and then decreased the EMT and renal fibrosis in SHRs. Furthermore, the decrease in EMT and renal fibrosis could lead to the restoration of renal function. It seems that ECE or DK could be beneficial for decreasing hypertensive nephropathy by decreasing EMT and renal fibrosis.     

Simulated Microgravity Inhibits the Proliferation of Chang Liver Cells by Attenuation of the Major Cell Cycle Regulators and Cytoskeletal Proteins

Simulated microgravity (SMG) induced the changes in cell proliferation and cytoskeleton organization, which plays an important factor in various cellular processes. The inhibition in cell cycle progression has been considered to be one of the main causes of proliferation inhibition in cells under SMG, but their mechanisms are still not fully understood. This study aimed to evaluate the effects of SMG on the proliferative ability and cytoskeleton changes of Chang Liver Cells (CCL-13). CCL-13 cells were induced SMG by 3D clinostat for 72 h, while the control group were treated in normal gravity at the same time. The results showed that SMG reduced CCL-13 cell proliferation by an increase in the number of CCL-13 cells in G0/G1 phase. This cell cycle phase arrest of CCL-13 cells was due to a downregulation of cell cycle-related proteins, such as cyclin A1 and A2, cyclin D1, and cyclin-dependent kinase 6 (Cdk6). SMG-exposed CCL-13 cells also exhibited a downregulation of α-tubulin 3 and β-actin which induced the cytoskeleton reorganization. These results suggested that the inhibited proliferation of SMG-exposed CCL-13 cells could be associate with the attenuation of major cell cycle regulators and main cytoskeletal proteins.     

Low temperature OMVPE growth of ZnSe withTertiary-butyl allyl selenide and dimethylzinc-triethylamine

The growth of high quality ZnSe by organometallic vapor phase epitaxy (OMVPE) has been investigated fortertiary-butyl allyl selenide (tBASe), combined with dimethylzinc-triethylamine (DMZn : NEt₃). Single crystalline ZnSe films were grown on GaAs at temperature as low as 350°C with a reasonable growth rate (~1 µm/h). Secondary ion mass spectrometry (SIMS) spectra show a negligible carbon incorporation in ZnSe films from tBASe even at high VI/II ratio, in contrast the carbon concentration of 10²¹ cm^-3 in ZnSe films grown from diallyl selenide (DASe)and methylallylselenide (MASe). Good surface morphology, crystalline and interface quality of ZnSe on (001) GaAs are confirmed by scanning electron microscopy, double crystal diffractometry (DCD) and Rutherford backscattering spectrometry (RBS). Photoluminescence at 10K shows sharp near-band-edge excitonic spectra.     

Surface crosslinking of high‐density polyethylene beads in a modified plasma reactor

High‐density polyethylene (HDPE) beads were successfully surface‐crosslinked in a modified plasma reactor. The modified plasma reactor treats large amounts of beads, which are uniformly surface‐crosslinked. In this study, effects of the gas pressure, radio‐frequency (RF) power, and the treatment time on the degree of surface crosslinking were systematically investigated. Degree of surface crosslinking was measured by solvent extraction method (boiling xylene method, BXM). The gel content of plasma‐treated HDPE increases from 0.0 to 1.05% within 10 min at 100 mTorr, 200 W. FTIR and DSC analyses show that the crosslinked layer after plasma treatment is limited only at HDPE surface without changing the bulk thermal property of HDPE. Through the analysis of FTIR, it was confirmed that main peaks corresponding to CH₂ bands were decreased and two peaks corresponding to CF₂ and CF₃ were observed after plasma surface modification. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 2921–2929, 2002; DOI 10.1002/app.10295     

Polydispersity effect on transient flow behavior of polystyrene solution

Summary The transient flow behavior of the binary blend of monodisperse polystyrene fractions is measured by a flow birefringence method. Both of the shear stress and first normal stress difference are obtained simultaneously in time by using a PMFB technique. The entanglements of the polymer chains significantly affect the rheological property of the binary blend in flow region. Especially, the entanglements of the high molecular weight fractions with themselves is proven to be the main source to the growth of first normal stress differences.     

Dynamics of the wet-end section in paper mills

A model representing the wet-end section of a paper mill has been developed to characterize its dynamic behavior during the grade change. The model is based on the mass balance relationships written for the simplified wetend white water network. From the linearization of the dynamic model, higher-order Laplace transfer functions were obtained followed by the reduction procedure to give simple lower-order models in the form of 1^st-order or 2^nd-order plus dead times. The dynamic response of the wet-end is influenced both by the white water volume and by the level of wire retention. Effects of key manipulated variables such as the thick stock flow rate, the ash flow rate and the retention aid flow rate on the major controlled variables were analyzed by numerical simulations. The simple dynamic model developed in the present study can be effectively used in the operation and control. This paper is dedicated to Professor Se Ki Moon on the occasion of his retirement from Hanyang University.