Structural system identification: from reality to models

The paper is an expository contribution on the subject of structural system identification, measured signal processing and their applications to model-based structural health detection. The materials covered in this paper are by and large extracted from the three theses of the first three authors. The paper focuses on the state-space oriented system identification theory as specialized to structural dynamics governing equations of motion, a judicious use of wavelet transformation techniques for extracting impulse response functions, various input-output combinations for multi-input and multi-output problems, robust ways of identifying both proportional and non-proportional damping parameters, and the use of localized identification theory for damage detection from measured response data. The authors then offer several outstanding challenges in structural system identification theory and their applications.     

Hierarchically Ordered Polymer Films by Templated Organization of Aqueous Droplets

Hierarchically ordered structures facilitate the incorporation of diverse functions simultaneously. The present report introduces a simple and novel strategy for producing hierarchically ordered polymeric films. Hierarchical ordering of aqueous droplets on a polymer solution is realized by the imposition of physical confinement via various shaped gratings. After drying of the solution, well‐ordered hierarchical structures were fabricated in the remaining polymer film. The size of the grating structure and the lattice size of spontaneous hexagonally packed aqueous pores comprise two different length scales, thereby offering multiscale ordering. Interfacial wetting of the polymer solution to the grating surface was crucial in terms of obtaining a highly ordered structure that can be tuned by dissolving a small amount of surfactant in the polymer solution. The present novel approach provides a new opportunity for lithography‐free fabrication of complex hierarchical structures.     

540kN力基准机砝码摆动的研究

日本国家计量研究院(National Research Laboratory of Metrology)540kN静重式力基准机中的振荡分量主要是由于砝码的摆动引起的。本文对砝码的动态特性做了详细的分析，给出了其摆动的轨迹图，并对由于砝码摆动引起的相对不确定度进行了评估。提出了一类采用传感器并联的叠加系统(以下称叠加系统)输出的力值信号来评估砝码动态特性的信号处理方法。它对研究静重式测力机砝码摆动提供了有效的分析方法。     

Epitaxial growth of GaN on (0001) Al<Subscript>2</Subscript>O<Subscript>3</Subscript> via solution-cast seed layer formation process using Ga(mDTC)<Subscript>3</Subscript>

This paper reports an alternative method for the growth of GaN epitaxial layer on (0001) Al₂O₃ substrate by hot-wall vapor phase epitaxy technique. Tris (N,N-dimethyldithiocarbamato)-gallium (III), Ga(mDTC)₃ was introduced as a precursor material for the seed layer formation in the growth of GaN. Optimal growth conditions with seed layers formed by the Ga(mDTC)₃ concentration of 0.047 mol/L were identified: Growth temperature was found to be 850 °C, and optimal distance between the reactant outlet and substrate was determined to be 12.5 cm. Characterization results showed that this growth method produce high-crystallinity GaN epitaxial layers at a relatively lower growth temperature compared to the existing growth techniques and simplify the growth process.     

Nucleoside-diphosphate kinase-mediated signal transduction via histidyl-aspartyl phosphorelay systems in Escherichia coli

Nucleoside-diphosphate kinase (NDP kinase), a key enzyme in nucleotide metabolism, is also known to be involved in growth and developmental control and tumor metastasis suppression. Interestingly, we find that coexpression of NDP kinase with Taz1, a Tar/EnvZ chimera, in the absence of its native signal, can activate a porin gene ompC-lacZ expression in Escherichia coli. Further studies show that NDP kinase can act as a protein kinase to phosphorylate histidine protein kinases such as EnvZ and CheA which are members of the His-Asp phosphorelay signal transduction systems in E. coli. Instead of ATP, the exclusive phosphodonor for histidine kinases, GTP can be utilized in vitro in the presence of NDP kinase to phosphorylate EnvZ and CheA, which then transfer the phosphoryl group to OmpR and CheY, the respective response regulators. The direct involvement of GTP for the phosphorylation of EnvZ through NDP kinase was further demonstrated by the use of a mutant EnvZ, which lost ability to be autophosphorylated with ATP. Phospho-OmpR thus formed can bind specifically to an ompF promoter sequence. These results suggest that NDP kinase may play a physiological role in signal transduction.     

Effects of changes in strain path on the anisotropy of yield stresses of low-carbon steel and 70-30 brass sheets

Uniaxial tensile tests in various directions following uniaxial extension, equibiaxial stretching or plane strain rolling have been performed to study the effects of changes in strain path on the anisotropy of yield stresses of aluminium-killed low-carbon steel and 70-30 brass sheets. The anisotropy could be predicted from the specimen textures, if dislocation structure were equiaxed, as in the case of equibiaxial stretching. However, elongated dislocation cell structures, developed in the steel specimens prestrained in uniaxial tension or plane strain rolling, gave rise to the second-stage yield stresses higher than predicted from textures in the directions different from the maximum prestrain direction. Planar dislocation structures in the brass specimens prestrained in uniaxial tension or plane strain rolling gave the second-stage yield stresses lower than predicted from the textures in the directions different from the maximum prestrain direction. The phenomena are discussed based on textures and dislocation structures.     

Nicalon-fibre-reinforced silicon-carbide composites via polymer solution infiltration and chemical vapour infiltration

A new, faster process was developed for the fabrication of Nicalon-fibre-reinforced SiC composites by combining polymer solution infiltration (PSI) and chemical vapour infiltration (CVI). The process led to the near-net-shape fabrication of fibre-reinforced ceramic-matrix composites and reduced infiltration time. Typical flexural strength and fracture toughness of these composites were 296 MPa and 10.9 MPa m^1/2 at room temperature (RT) and 252 MPa and 9.6 MPa m^1/2 at 1000 °C, respectively. The composites exhibited load-carrying capability after crack initiation.     

Performance of GaAs-AlGaAs V-grooved inner stripe quantum-well wirelasers with different current blocking configurations

GaAs-AlGaAs V-grooved inner stripe (VIS) quantum-well wire (QWW) lasers grown by metalorganic chemical vapor deposition with different current blocking configurations, n-blocking on p-substrate (VIPS), p-n-p-n blocking on n-substrate (VI(PN)_nS) and p-blocking on n-substrate (VINS) have been fabricated and characterized. The VIPS QWW lasers show the most stable characteristics with effective current confinement: one of the lasers shows fundamental transverse mode, lasing up to 5 mW/facet, typical threshold current of 39.9 mA at 818.5 mm, an external differential quantum efficiency of 24%/facet, and characteristic temperature of 92 K. The current tuning rate was almost linear at 0.031 mm/mA, and the temperature tuning rate was measured to be 0.14 nm/°C. Comparison of the light output versus current characteristics of the lasers with different current blocking configurations is presented here     

Motion based object tracking with mobile camera

An efficient algorithm which detects and tracks a moving object is proposed. The global motion energy caused by camera movement is eliminated by finding the maximal matching position with the cross-correlation value between two consecutive frames using the spiral scanning technique. The region of a moving object is segmented exactly by combining the results of the temporal derivatives and edge map from one image, and the actual centroid of the moving object is determined as the mid-point of the cumulative distribution of the projection profile of the region