Sizing and control of trailing edge flaps on a smart rotor for maximum power generation in low fatigue wind regimes

An extension of the spectrum of applicability of rotors with active aerodynamic devices is presented in this paper. Besides the classical purpose of load alleviation, a secondary objective is established: optimization of power capture. As a first step, wind speed regions that contribute little to fatigue damage have been identified. In these regions, the turbine energy output can be increased by deflecting the trailing edge (TE) flap in order to track the maximum power coefficient as a function of local, instantaneous speed ratios. For this purpose, the TE flap configuration for maximum power generation has been using blade element momentum theory. As a first step, the operation in non‐uniform wind field conditions was analysed. Firstly, the deterministic fluctuation in local tip speed ratio due to wind shear was evaluated. The second effect is associated with time delays in adapting the rotor speed to inflow fluctuations caused by atmospheric turbulence. The increase in power generation obtained by accounting for wind shear has been demonstrated with an increase in energy production of 1%. Finally, a control logic based on inflow wind speeds has been devised, and the potential of enhanced power generation has been shown by time‐domain simulations. Copyright © 2015 John Wiley & Sons, Ltd.     

Isolation of Alicyclobacillus and the influence of different growth parameters

Alicyclobacillus species are thermo-acidophilic, endospore-forming bacteria that are able to survive pasteurisation and have been implicated in a number of spoilage incidents involving acidic foods and beverages. The aim of this study was to compare three isolation methods used for the detection of Alicyclobacillus acidoterrestris and to investigate the influence of incubation temperature on the growth of A. acidoterrestris and A. acidocaldarius. Peach juice samples inoculated with A. acidoterrestris K47 were analysed using either the International Federation of Fruit Juice Producers (IFU) Method No. 12 (Method A), which involved spread plating onto Bacillus acidoterrestris (BAT) agar at pH 4.0; Method B, which involved pour plating using potato dextrose agar (PDA) at pH 3.7; or Method C, which made use of membrane filtration followed by incubation on K agar at pH 3.7. The performance of the three methods differed significantly, with the IFU Method No. 12 recovering the highest percentage of cells at 75.97%, followed by Method B at 66.79% and Method C at 3.43%. These findings strengthen the proposal of the IFU for the use of the IFU Method No. 12 as a standard international method for the detection of Alicyclobacillus. To investigate the effect on growth of different incubation temperatures A. acidoterrestris (three strains) and A. acidocaldarius (two strains) were incubated at either 45 °C or 25 °C. Growth at 25 °C was slower and maximum cell concentrations were lower (1 × 10⁵-10⁶ cfu/mL compared to 1 × 10⁷-10⁸ cfu/mL) than at 45 °C for A. acidoterrestris. A. acidocaldarius was unable to grow at 25 °C and cell concentrations decreased by 1-2 logs. Since a growth temperature of 25 °C could not inhibit growth of A. acidoterrestris, cooling to room temperature (20°-25 °C) is not an effective control measure for A. acidoterrestris inhibition.     

Correlation of Immunological and Histopathological Features with Gene Expression-Based Classifiers in Colon Cancer Patients

The purpose of this study was to evaluate the association between four distinct histopathological features: (1) tumor infiltrating lymphocytes, (2) mucinous differentiation, (3) tumor-stroma ratio, plus (4) tumor budding and two gene expression-based classifiers—(1) consensus molecular subtypes (CMS) plus (2) colorectal cancer intrinsic subtypes (CRIS). All four histopathological features were retrospectively scored on hematoxylin and eosin sections of the most invasive part of the primary tumor in 218 stage II and III colon cancer patients from two independent cohorts (AMC-AJCC-90 and AC-ICAM). RNA-based CMS and CRIS assignments were independently obtained for all patients. Contingency tables were constructed and a χ2 test was used to test for statistical significance. Odds ratios with 95% confidence intervals were calculated. The presence of tumor infiltrating lymphocytes and a mucinous phenotype (>50% mucinous surface area) were strongly correlated with CMS1 (p < 0.001 and p = 0.008) and CRIS-A (p = 0.006 and p < 0.001). The presence of mucus (≥ 10%) was associated with CMS3: mucus was present in 64.1% of all CMS3 tumors (p < 0.001). Although a clear association between tumor-stroma ratio and CMS4 was established in this study (p = 0.006), still 32 out of 61 (52.5%) CMS4 tumors were scored as stroma-low, indicating that CMS4 tumors cannot be identified solely based on stromal content. Higher budding counts were seen in CMS4 and CRIS-B tumors (p = 0.045 and p = 0.046). No other associations of the measured parameters were seen for any of the other CRIS subtypes. Our analysis revealed clear associations between histopathologic features and CMS or CRIS subtypes. However, identification of distinct molecular subtypes solely based on histopathology proved to be infeasible. Combining both molecular and morphologic features could potentially improve patient stratification.     

Interleukins as Mediators of the Tumor Cell—Bone Cell Crosstalk during the Initiation of Breast Cancer Bone Metastasis

Patients with advanced breast cancer are at high risk of developing bone metastasis. Despite treatment advances for primary breast cancer, metastatic bone disease remains incurable with a low relative survival. Hence, new therapeutic approaches are required to improve survival and treatment outcome for these patients. Bone is among the most frequent sites of metastasis in breast cancer. Once in the bone, disseminated tumor cells can acquire a dormant state and remain quiescent until they resume growth, resulting in overt metastasis. At this stage the disease is characterized by excessive, osteoclast-mediated osteolysis. Cells of the bone microenvironment including osteoclasts, osteoblasts and endothelial cells contribute to the initiation and progression of breast cancer bone metastasis. Direct cell-to-cell contact as well as soluble factors regulate the crosstalk between disseminated breast cancer cells and bone cells. In this complex signaling network interleukins (ILs) have been identified as key regulators since both, cancer cells and bone cells secrete ILs and express corresponding receptors. ILs regulate differentiation and function of bone cells, with several ILs being reported to act pro-osteoclastogenic. Consistently, the expression level of ILs (e.g., in serum) has been associated with poor prognosis in breast cancer. In this review we discuss the role of the most extensively investigated ILs during the establishment of breast cancer bone metastasis and highlight their potential as therapeutic targets in preventing metastatic outgrowth in bone.     

Adhesion of electron beam curable coatings on metal substrates

Electron beam (EB) curing is growing more and more important as a curing technique in industrial coatings, for example on substrates like wood, paper and plastics. However, commercial applications of EB curing on metal substrates are rather limited. The main technical cause for this originates from the insufficient adhesion and flexibility shown by EB cured coatings when applied on metal parts. However, adhesion and flexibility can be improved by various ways, in particular via a proper choice of the chemical pretreatment of the substrate. Adhesion of coatings, based on acrylated resins, on hot dipped galvanized steel can be improved dramatically by using a pretreatment, which is not usual in the current field of commercial coil coating. Pretreatments investigated show no relationship to surface tension, so it is highly probable that a chemical graft reaction, initiated by the electron beam, occurs at the interface of the coating and pretreatment layer. Experiments also show that cationic curing binder systems show promise with respect to adhesion and flexibility. Without optimizing the coating formulation (no wetting agents or other additives are used) relatively good adhesion and flexibility can be obtained on hot dipped galvanized steel, under both wet and dry conditions. The adhesion and flexibility are shown to be dependent on the radiation dose, and can be further improved by post-heating. In this case the polymer network gets the opportunity to relax internal stresses that are built up during the cure reaction.     

Intramedullary femoral osteosynthesis: an additional cause of ARDS in multiply injured patients?

This study analysed the effects of reaming and intramedullary nailing and thoracic injury related to development of ARDS and multi-organ failure in multiply injured patients. Sixty patients were entered into a retrospective follow-up study. Twenty-one patients with thoracic injury and femoral shaft fracture, treated by intramedullary nailing, were compared with 17 patients with a femoral shaft fracture without thoracic injury, and with 22 patients without femoral shaft fracture but with major thoracic injury. The incidence of ARDS, multiple organ failure (MOF) and the mortality rate in the groups was analysed, using chi 2 and Fisher exact tests. No significant differences in age, sex and ISS existed between the groups. There were no statistically significant differences with regard to the incidence of developing ARDS (P > 0.5), MOF (P > 0.5) and mortality rate (P > 0.2) after injury. The results of this study suggest that reaming of the femoral shaft as part of an intramedullary nailing procedure is not a major cause in developing ARDS and MOF in patients with femoral shaft fractures and thoracic injury. Conventional intramedullary nailing can be considered as a safe procedure in femoral shaft fractures in multiply injured patients, as well as in the presence of major thoracic injury.