Effects of composition and sintering time on liquid phase sintered Co-Cu samples in microgravity

Twelve Co-Cu powder compact samples with different liquid volume fractions were processed during microgravity liquid phase sintering on a suborbital sounding rocket and three Space Shuttle missions. The processing times ranged from 2.5 minutes to 66 minutes. The samples exhibited dimension stability after sintering. Microstructural evolutions such as densification, dihedral angle, contact per grain and grain growth rates, indicated a dependency on Cu composition and sintering time. Grain growth analysis showed a diffusion-controlled grain growth mechanism. The diffusional layer was found in a microgravity processed 70vol%Co-Cu sample. A mechanism that explains the transient nature of this diffusion layer is proposed and used to explain the results at other processing times. Agglomeration and coalescence of particles were observed in this study, and the grain size distributions were in agreement with LSEM model, which incorporates the effect of higher solid volume fraction and particle coalescence. Analysis of the samples also revealed considerable pore formation and metamorphosis. Unlike the Fe-Cu samples, in which pore breakup was found, pore filling and coarsening dominate in all Co-Cu samples. The evolution of these parameters has been used to enhance the understanding of driving forces that contribute to the pore metamorphosis during liquid phase sintering in the Co-Cu system under microgravity.     

Health risk assessment of inorganic arsenic intake of Cambodia residents through groundwater drinking pathway

In order to compare the magnitudes and health impacts of arsenic and other toxic trace elements in well water, groundwater and hair samples were collected from three areas with different arsenic exposure scenarios in the Mekong River basin of Cambodia. Ampil commune in Kampong Cham province was selected as an uncontaminated area, Khsarch Andaet commune in Kratie province was selected as a moderately contaminated area, and Kampong Kong commune in Kandal Province was selected as an extremely contaminated area. Results of ICP-MS analyses of the groundwater samples revealed that As, Mn, Fe and Ba concentrations were significantly different among the three study areas (Kruskal-Wallis test, p < 0.0001). Out of 46 observed wells in the Kandal province study area, 100% detected As > 50 μg L⁻¹ and Fe > 300 μg L⁻¹; 52.17% had Mn > 400 μg L⁻¹ and 73.91% found Ba > 700 μg L⁻¹. In the Kratie province study area (n = 12), 25% of wells showed elevated arsenic levels above 10 μg L⁻¹ and 25% had Mn > 400 μg L⁻¹, whereas samples from Kampong Cham province study area (n = 18) were relatively clean, with As < 10 μg L⁻¹. A health risk assessment model derived from the USEPA was applied to calculate individual risks resulting from drinking groundwater. Computational results indicated that residents from Kandal Province study area (n = 297) confronted significantly higher non-carcinogenic and carcinogenic risks than those in Kratie (n = 89) and Kampong Cham (n = 184) province study areas (Kruskal-Wallis test, p < 0.0001). 98.65% of respondents from the Kandal province study area were at risk for the potential non-cancer effect and an average cancer risk index was found to be 5 in 1000 exposure. The calculations also indicated that, in the Kratie province study area, 13.48% of respondents were affected by non-cancer health risks and 33.71% were threatened by cancer, whereas none of respondents in the Kampong Cham province study area appeared to have non-carcinogenic effect. Positively significant correlations of the arsenic content in scalp hair (As_h) with both arsenic levels in groundwater (As_w) (r_s (304) = 0.757, p < 0.0001) and individual average daily doses (ADD) of arsenic (r_s (304) = 0.763, p < 0.0001) undoubtedly indicated that arsenic accumulation in the bodies of Cambodia residents in the Mekong River basin was mainly through a groundwater drinking pathway. To the best of our knowledge, this is the first comprehensive report comparing individual health risk assessments of arsenic exposure through a groundwater drinking pathway to enriched arsenic levels from groundwater in the Mekong River basin, Cambodia. This study indicates that elevated arsenic concentrations in groundwater may lead to thousands of cases of arsenicosis in the near future if mitigating actions are not taken.     

On the magnetic, mechanical and rheological properties of rubber–nickel nanocomposites

Rubber–nickel nanocomposites were synthesized by incorporating freshly prepared nanometric nickel particles in two different matrices namely natural rubber and neoprene rubber according to specific recipes for various loadings of nano nickel and the cure characteristics of these composites were evaluated. The maximum torque values register an increase with the increase in loading of nickel in both composites and this is attributed to the non-interacting nature of nickel nanoparticles with rubber matrices. The cure time of natural rubber composites decreases with increase in the content of nickel, and in neoprene rubber cure, time increases with increase in filler content. In natural rubber, the curing reaction seems to be activated by the presence of nickel particles. The magnetization studies of the composites reveal that the magnetic properties of nickel are retained in the composite samples. The elastic modulus of natural rubber and neoprene rubber are largely improved by the incorporation of nickel particles.     

Hydrodynamic characteristics of gas–solid fluidization at high temperature

Effect of temperature on the hydrodynamics of bubbling gas–solid fluidized beds was investigated in this work. Experiments were carried out at different temperatures ranged of 25–600°C and different superficial gas velocities in the range of 0.17–0.78 m/s with sand particles. The time‐position trajectory of particles was obtained by the radioactive particle tracking technique at elevated temperature. These data were used for determination of some hydrodynamic parameters (mean velocity of upward and downward‐moving particles, jump frequency, cycle frequency, and axial/radial diffusivities) which are representative to solids mixing through the bed. It was shown that solids mixing and diffusivity of particles increases by increasing temperature up to around 300°C. However, these parameters decrease by further increasing the temperature to higher than 300°C. This could be attributed to the properties of bubble and emulsion phases. Results of this study indicated that the bubbles grow up to a maximum diameter by increasing the temperature up to 300°C, after which the bubbles become smaller. The results showed that due to the wall effect, there is no significant change in the mean velocity of downward‐moving clusters. In order to explain these trends, surface tension of emulsion between the rising bubble and the emulsion phase was introduced and evaluated in the bubbling fluidized bed. The results showed that surface tension between bubble and emulsion is increased by increasing temperature up to 300°C, however, after that it acts in oppositely.     

Electrical Conductance in Biological Molecules

Nucleic acids and proteins are not only biologically important polymers. They have recently been recognized as novel functional materials surpassing conventional materials in many aspects. Although Herculean efforts have been undertaken to unravel fine functioning mechanisms of the biopolymers in question, there is still much more to be done. Here the topic of biomolecular charge transport is presented with a particular focus on charge transfer/transport in DNA and protein molecules. The experimentally revealed details, as well as the presently available theories, of charge transfer/transport along these biopolymers are critically reviewed and analyzed. A summary of the active research in this field is also given, along with a number of practical recommendations.     

Influence of Ultrasonic Waves on the Processing of Cotton with Cationic Softener

In recent years, the textile industry has been forced to develop new technologies to reduce energy and water consumption. The use of ultrasound in textile wet processing is one solution to this problem. The aim of this work was to investigate the effects of ultrasonic energy on the processing of cotton with a cationic softener. For this purpose, cotton fabric was treated with a fatty acid amide derivative cationic softener in water using ultrasonic energy during treatment. The physical properties of the fabrics treated under different conditions are discussed. The results show that the treatment of fabrics with softeners in an ultrasound bath is more effective compared to conventional methods and that it enhances the physical properties of the cotton.     

Model Free Approach for Non-Isothermal Decomposition of Un-Irradiated and γ-Irradiated Silver Acetate: New Route for Synthesis of Ag(2)O Nanoparticles

Kinetic studies for the non-isothermal decomposition of unirradiated and γ-irradiated silver acetate with 10(3) kGy total γ-ray doses were carried out in air. The results showed that the decomposition proceeds in one major step in the temperature range of (180-270 °C) with the formation of Ag(2)O as solid residue. The non-isothermal data for un-irradiated and γ-irradiated silver acetate were analyzed using Flynn-Wall-Ozawa (FWO) and nonlinear Vyazovkin (VYZ) iso-conversional methods. These free models on the investigated data showed a systematic dependence of Ea on α indicating a simple decomposition process. No significant changes in the thermal decomposition behavior of silver acetate were recorded as a result of γ-irradiation. Calcinations of γ-irradiated silver acetate (CH(3)COOAg) at 200 °C for 2 hours only led to the formation of pure Ag(2)O mono-dispersed nanoparticles. X-ray diffraction, FTIR and SEM techniques were employed for characterization of the synthesized nanoparticles.     

Pre-Coding for MIMO Systems in Frequency-Selective Fading Channels

Multiple input multiple output (MIMO) systems showed good utilization of channel characteristics. In MIMO systems multiple signals are transmitted using multiple antenna system. This provides each receiver the combined signals and hence, array processing techniques helps in reducing the effects of interference among them. In this paper we devise the use of pre-coded MIMO system to reduce the effects of frequency selectivity and hence, enhance the systems capacity and/or reduce the bit error rate. In this technique we introduce a temporal pre-coder on each antenna signal; this creates a deterministic multi-path signals similar to signals received when the channel is multi-path fading channel. The same antenna signal will arrive at each receiver forming orthogonal sub-space and the receiver will be simple add and delay of the received signals. Ant colony optimization is used in this paper to select the best pre-code. Results showed that we can diagonalize the channel matrix and practically eliminate the interference for frequency selective fading channel. Simulation of two transmitting two receiving antennas pre-coded MIMO system showed that the capacity can be doubled.     

Improvement of processing parameters by using processing aids during the linear low‐density polyethylene film blowing process

Polymer processing aids are used to improve processing properties in the polyethylene industry. These materials improve not only the physical and mechanical properties of the final products but also their processing properties. This paper studies some of the processing variables such as die pressure, melt temperature, masterbatch activity, and die gap by examining the functions of polymer processing aids and, last but not least, the effects on the film blowing process of two‐component processing aids containing a perfluorinated additive and polyoxyethylene. J. VINYL ADDIT. TECHNOL., 2010. © 2009 Society of Plastics Engineers     

The Effect of the Relief Wave on the Uniformity of an Air Blast Load

In most blast loading structure analyses, it is assumed that the load acts uniformly on a target area. For the rationable design, it is useful to have a quantitative criterion to determine at which maximum distance the standoff can be placed to assume a uniform pressure distribution. Surprisingly, no standard criterion was found in the literature and the effect of blast wave clearing was not considered as well. In this paper, pressure histories applied on structures are calculated considering the non‐uniform loading characteristic as well as pressure relief from the edges. Additionally, the effects of various parameters on uniformity of impulse distribution are investigated. The results have shown that the effect of pressure relief on impulse uniformity is very important, especially when the blast wave is attenuated. This phenomenon leads an optimum distance at which impulse distribution is the most uniform.