A spectroscopic study of vanadium-phosphate glasses containing vanadium chloride

The optical properties of vanadium-phosphate glasses containing various amounts of (V₂O₅)₅₀(P₂O₅)_50–x (VCl₃) _x , wherex = 0.05, 0.06, 0.08 and 0.1, were measured as a function of VCl₃ content. It is found that by adding VCl₃ to the melt when the glass is formed, the added chlorine which acts as an oxidizing agent alters the ratio of concentration of vanadium ions and thus the absorption coefficient. Data on absorption in this study show that the power law,() =B() –E ₀) ⁿ / is best followed forn = 3, and the absorption is solely due to vanadium oxide. Furthermore, the infrared absorption spectra of this system were investigated in the wave number range 400 to 4600cm^–1. The addition of VCl₃ to the vanadium-phosphate glasses does not seem to introduce any new absorption band in this range as compared with the spectrum of a pure vanadium-phosphate glass. Furthermore, no significant difference in the absorption spectra was observed by annealing the V₂O₅-P₂O₅ glasses up to 200° C.     

Adhesion to skin

The failure energy of an adhesive bond can be factorized into two terms, one of which is a dimensionless loss function and the other, the true interfacial bonding energy, ₀. Experimental techniques have been developed to effect a separation of these two terms and thus measure ₀, but they are unsuitable for the pressure-sensitive adhesives used in surgical tapes and dressings. This is because these adhesives flow readily under load. This paper describes an extrapolation technique by which this problem can be resolved. Adhesive peel data are extrapolated both to zero peel velocity and zero load, to give a true threshold value for peeling energy which is independent of temperature. Values of ₀ are given for a natural-rubber based adhesive and substrates of glass and human skinin vivo. For glass ₀ = 28J m^–2 and for normal skin ₀ 14J m-2.     

Out-of-Field Hippocampus from Partial-Body Irradiated Mice Displays Changes in Multi-Omics Profile and Defects in Neurogenesis

The brain undergoes ionizing radiation exposure in many clinical situations, particularly during radiotherapy for brain tumors. The critical role of the hippocampus in the pathogenesis of radiation-induced neurocognitive dysfunction is well recognized. The goal of this study is to test the potential contribution of non-targeted effects in the detrimental response of the hippocampus to irradiation and to elucidate the mechanisms involved. C57Bl/6 mice were whole body (WBI) or partial body (PBI) irradiated with 0.1 or 2.0 Gy of X-rays or sham irradiated. PBI consisted of the exposure of the lower third of the mouse body, whilst the upper two thirds were shielded. Hippocampi were collected 15 days or 6 months post-irradiation and a multi-omics approach was adopted to assess the molecular changes in non-coding RNAs, proteins and metabolic levels, as well as histological changes in the rate of hippocampal neurogenesis. Notably, at 2.0 Gy the pattern of early molecular and histopathological changes induced in the hippocampus at 15 days following PBI were similar in quality and quantity to the effects induced by WBI, thus providing a proof of principle of the existence of out-of-target radiation response in the hippocampus of conventional mice. We detected major alterations in DAG/IP3 and TGF-β signaling pathways as well as in the expression of proteins involved in the regulation of long-term neuronal synaptic plasticity and synapse organization, coupled with defects in neural stem cells self-renewal in the hippocampal dentate gyrus. However, compared to the persistence of the WBI effects, most of the PBI effects were only transient and tended to decrease at 6 months post-irradiation, indicating important mechanistic difference. On the contrary, at low dose we identified a progressive accumulation of molecular defects that tended to manifest at later post-irradiation times. These data, indicating that both targeted and non-targeted radiation effects might contribute to the pathogenesis of hippocampal radiation-damage, have general implications for human health.     

Facile Deposition of Silver Nanoparticles on Photonic Cellulose Nanocrystals Films: A Study on Solvent Stability and Post Antibacterial Activity

Cellulose nanocrystals (CNCs) incorporated with silver nanoparticles (AgNPs) photonic films have drawn considerable attention due to their plasmonic chiroptical activity. However, the exploitation of some fundamental properties for practical use such as the affinity analysis of metal nanoparticles attached to the surface of photonic films according to the solvent compatibility and antibacterial activity under physical conditions has yet not been studied. Hence, a facile process of in situ deposition of AgNPs into the chiral structure of CNC films is proposed. CNC photonic films, cross-linked by glutaraldehyde are prepared. This interaction generated the solvents-stable photonic film with a considerable amount of unreacted aldehyde functional groups that facilitates the reduction of Ag salt to AgNPs. The formed AgNPs in the photonic films show excellent stability over immersion in various polar and non-polar solvents. The post-solvent treated photonic films display excellent contact-based antibacterial behavior against gram-negative Escherichia coli.     

A fatigue-life prediction methodology for notched aluminum-magnesium alloy in gulf seawater environment

Local-strain and linear-elastic fracture-mechanics (LEFM) methodologies have been investigated for prediction of the corrosion-fatigue life of notched components of specially developed Al-2.5Mg alloys exposed to Arabian Gulf seawater environment. Corrosion-fatigue crack initiation life estimates were obtained using strain-life relationships; corrosion-fatigue crack propagation life estimates were obtained using LEFM relationships. The total corrosion-fatigue life was considered to be the sum of the crack initiation and crack propagation lives. Estimated corrosion-fatigue lives were compared with experimentally obtained corrosion-fatigue life data using center-notched specimens of three types of Al-2.5Mg alloys (containing different amounts of chromium) exposed to Arabian Gulf seawater environment. Two notch geometries, a circular notch (K _t= 2.42) and an elliptical notch (K _t= 4.2), were investigated. Good corrosion-fatigue life predictions can be obtained using local-strain and LEFM methodologies by determining the relevant material constants via a few simple fatigue tests on smooth specimens and a few crack-growth-rate tests in the environment at the frequency of interest.     

Radiation-induced wood plastic composites under combinations of monomers

Radiation-induced wood plastic composites (WPC) were prepared from five varieties of Bangladeshi timbers, using seven different types of monomers. The mixtures of double and triple monomers were investigated along with the single-monomer system for the preparation of composites. Among the three systems, single-monomer process showed the highest polymer loading with butylmethacrylate (BMA). Tensile strength (TS) property, represented as T_f = TS_wpc/TS_wood was determined. Highest T_f values were achieved with the soft wood. The effects of dose and dose rate, monomer concentration, and swelling agent were also studied. Suitable total dose was found to be 3 Mrad at 0.8 Mrad/h, and methanol exhibited the best swelling ability for the woods at a ratio of 1 : 9 v/v in all the monomer investigated.     

Thermoelectric properties of SbNCa3 and BiNCa3 for thermoelectric devices and alternative energy applications

Thermoelectric properties of two antiperovskites SbNCa₃ and BiNCa₃ are calculated using first principles calculations. High values of Seebeck coefficients are observed for these materials. Electrical and thermal conductivities are also calculated. Increase in thermal conductivity and decrease in electrical conductivity are found with increasing temperature. The maximum values of thermal conductivity are 92×10¹⁴  W/m K s and 88×10¹⁴  W/m K s for SbNCa₃ and BiNCa₃ respectively at a temperature of 900 K. The peak values of 5×10²⁰/Ω m s and 5.2×10²⁰/Ω m s are achieved for n-type SbNCa₃ and BiNCa₃ respectively at a temperature of 300 K. Figure of merit is achieved for these materials at room temperature which shows that these materials can be useful for thermoelectric devices and alternative energy sources.     

Micellar association in simultaneous presence of organic salts/additives

Viscosity measurements under Newtonian flow conditions had been performed on cetyltrimethylammonium bromide (CTAB) aqueous solutions in the combined presence of sodium salts of aromatic acids (sodium salicylate, NaSal; sodium benzoate, NaBen; sodium anthranilate, NaAn) and organic additives (1-hexanol, C₆OH; n-hexylamine, C₆NH₂) at 30°C. On addition of C₆OH or C₆NH₂, the viscosity of 25 mM CTAB solution remained nearly constant without salt as well as with a lower salt concentration. This is due to low CTAB concentration which is not sufficient to produce structural changes in this concentration range of salts. However, as the salt concentration was increased further, the effect of C₆OH/C₆NH₂ addition was different with different salts: The viscosity first increased; then a decrease was observed with the former while with C₆NH₂ a decrease followed by constancy appeared in plots of relative viscosities (η _r ) vs. organic additive concentrations. At further higher salt concentration, the magnitude of η _r was much higher. The viscosity increase is explained in terms of micellar growth and the decrease in terms of swollen micelle formation (due to interior solubilization of organic additive) or micellar disintegration (due to formation of water + additive pseudophase).     

Photochemical oxidation of fatty acid esters with and without chlorophyll

1. It has been confirmed that the principal products formed in the oxidation of methyl oleate by oxygen under a variety of conditions are predominantlytrans hydroperoxides. However no inversion of the double bond occurs in unoxidized oleate. Hence the conversion ofcis totrans double bonds and peroxide formation occur together in the same molecules.
2. The autoxidation of methyl linoleate at low temperature yields predominantlycis,trans conjugated hydroperoxides. Autoxidation at 25°C., oxidation catalyzed by visible light, or ultraviolet light and copper soap catalyzed oxidation at temperatures appreciably above 0°C., lead to the formation primarily oftrans,trans conjugated hydroperoxides. The inversion of the second double bond in this case appears to be independent of the peroxide-forming reactions.
3. The photochlorophyll oxidation of methyl linoleate leads to the formation of some unconjugated hydroperoxides, some of which containtrans double bonds.
4. Under all of the conditions employed in the present investigation, the oxidation of methyl oleate and linoleate led primarily to the formation of monomeric peroxides which retained most of the unsaturation of the parent compound.

     

Painting-91: a large scale database for computational painting categorization

Computer analysis of visual art, especially paintings, is an interesting cross-disciplinary research domain. Most of the research in the analysis of paintings involve medium to small range datasets with own specific settings. Interestingly, significant progress has been made in the field of object and scene recognition lately. A key factor in this success is the introduction and availability of benchmark datasets for evaluation. Surprisingly, such a benchmark setup is still missing in the area of computational painting categorization. In this work, we propose a novel large scale dataset of digital paintings. The dataset consists of paintings from 91 different painters. We further show three applications of our dataset namely: artist categorization, style classification and saliency detection. We investigate how local and global features popular in image classification perform for the tasks of artist and style categorization. For both categorization tasks, our experimental results suggest that combining multiple features significantly improves the final performance. We show that state-of-the-art computer vision methods can correctly classify 50 % of unseen paintings to its painter in a large dataset and correctly attribute its artistic style in over 60 % of the cases. Additionally, we explore the task of saliency detection on paintings and show experimental findings using state-of-the-art saliency estimation algorithms.