Impurity Distribution Behavior in Caprolactam Extraction with Environmentally Benign Mixed Solvents

In a previous study a solvent mixture of heptane containing 40 mass % heptanol was selected as an alternative in the industrial extraction of caprolactam to replace benzene, toluene, or chlorinated hydrocarbons. This work reports the equilibrium distribution ratio of caprolactam and four model impurities of organic nature, namely, cyclohexanone, aniline, n‐methylcaprolactam, and cyclohexane‐carboxamide, comparing the mixed solvents with toluene as a reference. The resulting phase equilibria were interpreted using the equilibrium stage model. Based on these calculations it was found that, compared to toluene, the co‐extracted fraction of cyclohexanone and aniline was higher, that of n‐methylcaprolactam was comparable, and that of cyclohexane‐carboxamide was lower using the mixed solvent. Overall, the mixed solvent reduced the fraction of co‐extracted impurities by almost 10 %.     

Occurrence of the mycotoxins ochratoxin A, zearalenone and deoxynivalenol in feed components.

The mycotoxin contamination of feed components used by the Dutch cooperative feed industry was surveyed to estimate the risk for animal production losses. Of 89 randomly and 6 selectively taken samples of raw materials harvested in 1988 and 1989 27% were contaminated with ochratoxin A (OCHRA), 31% with zearalenone (ZEA) and 20% with deoxynivalenol (DON). The mean content (microgram/kg) of all positive randomly taken samples was 18 (OCHRA), 62 (ZEA) and 630 (DON). The highest level (microgram/kg) for all samples was 120 (OCHRA) in barley, 3100 (ZEA) in corn cob mix and 1900 (DON) in maizegluten feed. The results of this survey show that feed components are often contaminated with mycotoxins. However, the contamination level could only sporadically cause production losses in animal husbandry.     

Hydrological simulations in the Rhine basin.

Simulations with regional climate models (RCMs), carried out for the Rhine basin, have been analyzed in the context of implications of the possible future discharge of the Rhine river. In a first analysis, the runoff generated by the RCMs is compared to observations, in order to detect the way the RCMs treat anomalies in precipitation in their land surface component. A second analysis is devoted to the frequency distribution of area averaged precipitation, and the impact of selection of various driving global climate models.     

Accidents,often the result of an ‘uncontrolled business process’—a study in the (Dutch) chemical industry

Often companies in the (petro‐) chemical industry claim that all possible countermeasures against potential accidents have been taken and therefore accidents are unforeseeable. In this paper we question this statement by analysing the pre‐warning signals (precursors) preceding a number of industrial accidents. 17 accidents that occurred in the (petro‐) chemical industry have been investigated by exploring FACTS, an accident database containing information about industrial accidents worldwide. This paper will demonstrate that the existence of precursor information could have been used to foresee and even prevent these accidents if a proper control action had been initiated. The accidents are analysed further, according to a control model, which was adapted from that of C. Argyris. It demonstrates the ineffectiveness of several elements of business process control loops and that the so‐called ‘double‐loop learning’ cycle is more important than the ‘single‐loop learning’ cycle if one considers safety improvement. Copyright © 2003 John Wiley & Sons, Ltd.     

A method to estimate the initial length of equine tendons

A procedure is described by which the length of a tendon at the onset of loading is determined objectively. The procedure includes the fitting of third-order polynomial functions on the load-elongation data. The onset of loading is detected by an increasing fit of the polynomial by selective data reduction of the initial part of the load-elongation curve. The procedure results in an objective and reproducible definition of the zero strain level of a tendon.     

Quantifying technological aspects of process sustainability: a thermodynamic approach

Thermodynamic analysis has greatly helped to compare and to improve the energy efficiency of all kinds of technological processes, and recently we have also attempted to analyse some important biochemical processes under intracellular conditions. This work has pointed to some key strategies on sustainable process operation, such as the exceptionally high thermodynamic efficiencies of chemical and solar energy conversion in living cells.From this it was expected that the sustainability strategies of specific biochemical processes and those of the ecosphere as a whole could be of guidance to current technological processes, especially now that there is a growing demand from government and industry to effectively deal with sustainability aspects in process analysis. Our focus on this issue has led to methodologies to quantify technological aspects of sustainability by making use of thermodynamic principles. Three indicators were constructed to express three technological aspects of process sustainability. First, an indicator for the sustainability of resource utilization considers the thermodynamic input and the availability the resources used in the process. Secondly, an efficiency indicator focuses on the conversion and loss of thermodynamic quantities in the process itself. Thirdly, an indicator for environmental compatibility takes into account the thermodynamic input required to prevent possible negative side effects of the process, such as global warming or water pollution. The three indicators are used to reflect on (un)sustainable characteristics of current technological processes compared to biochemical processes. Finally, we address the drawbacks of combining indicator values to express overall sustainability.     

Thermoplastic vulcanizates obtained by reaction-induced phase separation: Interplay between phase separation dynamics,final morphology and mechanical properties

Reaction-induced phase separation (RIPS) of miscible blends of poly(?-caprolactone) (PCL) and an epoxy resin based on poly(propylene oxide) (PPO) was used to prepare thermoplastic vulcanizates (TPVs) with fine rubber dispersions. Scanning electron microscopy (SEM) confirmed the formation of cross-linked rubber particles dispersed in the thermoplastic matrix at PCL contents ≥20 wt%. The morphology development during phase separation was studied by optical microscopy (OM) and time-resolved small-angle light scattering (SALS). It was shown that higher curing temperatures lead to a decrease in rubber particle size, but at the same time lead to an increase in the extent of particle connectivity. In some cases, gelation of the PPO-rich phase limits full structure development, which leads to extensive connectivity between the dispersed rubber particles and a strong deterioration in tensile properties.     

An improved system for the control of dissolved oxygen in freshwater aquaria

A system for the removal and control of dissolved oxygen (DO) from freshwater was designed and constructed with aquarium-type fish studies in mind. Degassed water was obtained using a partial vacuum of -14 psi, and DO regulated at an aquarium scale using electronically controlled aeration with timed partial water renewal. The degassing system was capable of producing water with approximately 1.7 mg L(-1) DO within 10 min of operation, and 0.55 mg L(-1) after 2h. The control system was capable of maintaining DO levels of ca 0.8 mg L(-1) over 48 h in the absence of aeration and further capable of precisely controlling DO levels as low as 1.16+/-0.002 mg L(-1) (mean+/-SEM) with aeration over a 48 h period.     

Factors affecting contrasting results between self-reported and performance-based levels of physical limitation

Molecular electrostatic potential (MEP) maps of certain 3-methoxy flavone derivatives having different anti-picornavirus activities have been studied. Geometries of the molecules were optimised and charge distributions computed using the AM1 molecular orbital method. Hybridization displacement charges (HDC) were combined with the L?wdin charge distributions to compute the MEP maps. Reliability of the method of computing MEP maps was tested by studying certain other molecules for which ab initio MEP results are available. The anti-picornavirus activities of the flavones have been shown to be related with negative MEP values in two regions, one near the 3-methoxy group and another in a diagonally opposite region near the substituent attached to the C7 atom of the molecules.     

Digital implementation of bus clamped space vector modulation

Space vector modulation has recently become a popular PWM method of supplying a high performance drive. An adaptation of SVM modulation is presented here. This system is called bus clamped space vector modulation. This method has some practical advantages when compared to normal SVM. These include a reduced average switching frequency, easy digital implementation and asynchronous control and switching frequencies