3D FEM analysis,dynamic modeling,and performance assessment of transverse flux PMSG for small‐scale gearless wind energy conversion systems

The transverse flux permanent magnet synchronous generator has a great potential for use in direct‐drive wind energy conversion systems due to its large pole numbers, high torque, and power density. This research work develops dynamic model of a single‐side transverse flux permanent magnet synchronous generator for use in a small‐scale gearless wind energy conversion system. For acquiring the parameters of the considered generator, required for dynamic modeling, 3D finite element model of the machine is developed and analyzed in both magneto‐static and transient modes. Field‐oriented control approach is employed for tracking maximum power point from the variable wind speed. The simulation results illustrate an accurate response of the system to the wind speed variation and proper performance of the developed dynamic model and control approach of the system. Copyright © 2015 John Wiley & Sons, Ltd.     

Probabilistic assessment of torsion in concrete beams externally strengthened with CFRP composites

This paper illustrates an analytical probabilistic study of concrete beams subjected to torsion that are strengthened with carbon fiber reinforced polymer (CFRP). Hii and Al-Mahaidi’s method is one of the best analytical models for evaluating the torsional capacity of CFRP strengthened reinforced concrete beams. The first-order reliability method is carried out to probabilistically assess the capacity of CFRP-strengthened beams. For this aim, the statistical characteristics of design variables and model errors have been considered, followed by the determination of the average reliability indexes of the strengthened beams. The effect of each design variable on the average reliability is also determined. The assessment shows that the Hii and Al-Mahaidi’s analytical model is unconservative. In order to correct the situation, a more relaxed set of resistance factors for use in a load and resistance factor design format are needed. These are then determined for two target reliability levels of $ \beta_{\text T} $  = 3.0 and $ \beta_{\text T} $  = 3.5. It is found that factors of 0.9200 and 0.8225 are needed for target reliability levels, $ \beta_{\text T} $  = 3.0 and $ \beta_{\text T} $  = 3.5, respectively. Values of 0.9 and 0.8 are suggested for use in real practice depending on the target reliability sought.     

Numerical investigation of the mechanism behind the deflagration to detonation transition in homogeneous and inhomogeneous mixtures of H2-air in an obstructed channel

The accidental release of hydrogen into enclosures can result in a flammable mixture with concentration gradients and possible deflagration-to-detonation transition (DDT). This numerical study aims to investigate the effect of obstacle spacing and mixture concentration on the DDT in a homogeneous and inhomogeneous hydrogen-air mixture. The paper focuses on the mechanisms behind the DDT in two mixtures with an average hydrogen concentration of 15% and 30%. Unlike the near-stoichiometric mixture, in the lean mixture, DDT only occurs in the inhomogeneous mixture. Depending on obstacle spacing, three different regimes of DDT were observed in the near-stoichiometric inhomogeneous mixture: i) Detonation was ignited when a strong Mach stem formed and propagated between the obstacles; ii) two explosion centers appeared when incident shock and Mach stem reflected from upper and lower obstacles, respectively; iii) Mach stem did not form but DDT occurred behind the flame front at the top of the obstacle.     

Acidic sulphate leaching of chalcopyrite concentrates in presence of pyrite

Copper concentrates with mineralogy dominated by chalcopyrite have slow leaching kinetics at atmospheric pressure in sulphate media because of the formation of passivation layer on its surface during the leaching. To enhance the leaching rate of the copper concentrate, pyrite was added to act as a catalyst. Pyrite and copper sulphide minerals then form a galvanic cell which increases both the copper leaching rate and yield. Effect of parameters such as solution redox potential, temperature, initial acid concentration, solids content, total initial iron concentration and pyrite to copper sulphide minerals mass ratio were investigated. Mineralogical analyses by XRD were performed on selected leach residues and the feed materials. A copper recovery higher than 80% in 24 h was achieved at a redox potential of 410 mV vs Ag, AgCl, a temperature of 85 °C, 15 g/L of initial acid concentration, a solid content of 7.8% (w/v), a total initial iron concentration 5 g/L and pyrite to copper sulphide minerals mass ratio 2:1. XRD patterns on leach residues showed that candidates for surface passivation, i.e. jarosite and elemental sulphur, were formed at high total initial iron concentrations.     

The S-transform using a new window to improve frequency and time resolutions

The S-transform presents arbitrary time series as localized invertible time–frequency spectra. This transformation improves the short-time Fourier transform and the wavelet transform by merging the multiresolution and frequency-dependent analysis properties of wavelet transform with the absolute phase retaining of Fourier transform. The generalized S-transform utilizes a combination of a Fourier transform kernel and a scalable-sliding window. The common S-transform applies a Gaussian window to provide appropriate time and frequency resolution and minimizes the product of these resolutions. However, the Gaussian S-transform is unable to obtain uniform time and frequency resolution for all frequency components. In this paper, a novel window based on the $t$ student distribution is proposed for the S-transform to achieve a more uniform resolution. Simulation results show that the S-transform with the proposed window provides in comparison with the Gaussian window a more uniform resolution for the entire time and frequency range. The result is suitable for applications such as spectrum sensing.     

Highly Conductive Carbon Nanotube‐Graphene Hybrid Yarn

An efficient procedure for the fabrication of highly conductive carbon nanotube/graphene hybrid yarns has been developed. To start, arrays of vertically aligned multi‐walled carbon nanotubes (MWNT) are converted into indefinitely long MWNT sheets by drawing. Graphene flakes are then deposited onto the MWNT sheets by electrospinning to form a composite structure that is transformed into yarn filaments by twisting. The process is scalable for yarn fabrication on an industrial scale. Prepared materials are characterized by electron microscopy, electrical, mechanical, and electrochemical measurements. It is found that the electrical conductivity of the composite MWNT‐graphene yarns is over 900 S/cm. This value is 400% and 1250% higher than electrical conductivity of pristine MWNT yarns or graphene paper, respectively. The increase in conductivity is asssociated with the increase of the density of states near the Fermi level by a factor of 100 and a decrease in the hopping distance by an order of magnitude induced by grapene flakes. It is found also that the MWNT‐graphene yarn has a strong electrochemical response with specific capacitance in excess of 111 Fg^?1. This value is 425% higher than the capacitance of pristine MWNT yarn. Such substantial improvements of key properties of the hybrid material can be associated with the synergy of MWNT and graphene layers in the yarn structure. Prepared hybrid yarns can benefit such applications as high‐performance supercapacitors, batteries, high current capable cables, and artificial muscles.     

GTD-111高温合金瞬时液相连接过程中显微组织的变化

研究连接温度和时间对瞬时液相连接GTD-111高温合金显微组织的影响.连接过程采用BNi-3填料,在1080、1120和1160℃下,分别进行195、135和90 min的等温凝固,再进行均匀化热处理.结果表明,在冷却过程中,接头区域连续形成富Ni硼化物、Ni?B?Si三元化合物和共晶γ的金属间化合物和共晶化合物.随着...     

Systematic design optimization of grabs considering bulk cargo variability

Ship unloader grabs are usually designed using the manufacturer’s in-house knowledge based on a traditional physical prototyping approach. The grab performance depends greatly on the properties of the bulk material being handled. By considering the bulk cargo variability in the design process, the grab performance can be improved significantly. A multi-objective simulation-based optimization framework is therefore established to include bulk cargo variability in the design process of grabs. The primary objective is to reach a maximized and consistent performance in handling a variety of iron ore cargoes. First, a range of bulk materials is created by varying levels of cohesive forces and plasticity in the elasto-plastic adhesive DEM contact model. The sensitivity analysis of the grabbing process to the bulk variability allowed three classes of iron ore materials to be selected that have significant influence on the product performance. Second, 25 different grab designs are generated using a random sampling method, Latin Hypercube Design, to be assessed as to their handling of the three classes of iron ore materials. Of this range of grab designs, optimal solutions are found using surrogate modelling-based optimization and the NSGA-II genetic algorithm. The optimization outcome is verified by comparing predictions of the optimization algorithm and results of DEM-MBD co-simulation. The established optimization framework offers a straightforward and reliable tool for designing grabs and other similar equipment.     

The identification of radiolytic decomposition products from tributyrin

In order to facilitate the detection of radiolytic products of triglycerides which may be of higher molecular weight than their precursor, a low molecular weight triglyceride, tributyrin, was selected as a model system, and gel permeation chromatography was used to effect their separation. The irradiation treatment was conducted under vacuum at 50 Mrad. Radiolytic products were collected by a precolumn technique for the highly volatile compounds; a combination of cold finger distillation and gel permeation for the less volatile fractions and finally gel permeation chromatography of the residue after distillation for the higher molecular weight compounds. A large number of compounds expected on the basis of previous work were identified in the present work from irradiated tributyrin. In addition, the techniques employed permitted the identification of several new compounds. These include butanetriol triesters, erythritol tetraesters, and other polyglycol polyesters.     

Prediction of hydrate equilibrium conditions using k-nearest neighbor algorithm to CO2 capture

Gas or clathrate hydrates are an important issue when they form in the oil and gas pipelines. Since the determination of the hydrate formation temperature and pressure is very difficult experimentally for every gas system and it is impossible in terms of cost and time approximately, mathematical models can be useful tools to overcome these difficulties. In this study, k-nearest neighbor model was used to predict the equilibrium conditions of hydrate formation in absorption and separation of carbon dioxide from flue gas mixture, containing carbon dioxide and nitrogen. At the training phase, temperature and composition data of nitrogen and carbon dioxide in the flue gas mixture at equilibrium conditions and the equilibrium pressures of hydrate formation were used as input and output, respectively. The error percentage less than 0.38% indicates the high accuracy of the proposed model. In this study, 80%, 85%, and 90% of the training data are examined for three numbers of nearest. For three numbers of used nearest (k = 1, k = 2 and k = 3), the value of k = 1 leads to the lowest error; so, it is selected as the best nearest in the presented model.