Heptane Dehydrocyclization Over Pt/KL Catalysts Doped with Barium or Lanthanum

Several 1 wt% Pt/KL catalysts doped with different concentrations of either BaO or La₂O₃ were prepared by successive impregnation of a zeolite KL and then characterized by H₂-O₂ titration, TPR, CO–FTIR, TEM-XEDS and XPS. Catalytic activity measurements in the hydroconversion of n-heptane showed that barium highly enhances the aromatization activity of Pt/KL, the more so the higher the barium concentration. The yield to aromatics increases to a lesser degree by adding 1 wt% La, but it is little modified at higher La concentrations. The CO–FTIR results suggest that the promoter effect of barium is related to an electron enrichment of Pt produced by the BaO Pt⁰ interaction which, according to the TEM–XEDS and XPS results, is more favored than the La₂O₃ Pt interaction.     

Effect of compression on the performance of a HT-PEM fuel cell

This paper shows by thorough electrochemical investigation that (1) the performances of high-temperature polymer electrolyte fuel cell membrane electrode assemblies of three suppliers are differently affected by compressive forces. (2) Membrane thickness reduction by compressive pressure takes place less than expected. (3) A contact pressure cycling experiment is a useful tool to distinguish the impact of compression on the contact resistances bipolar plate/gas diffusion layer (GDL) and GDL/catalytic layer. A detailed visual insight into the structural effects of compressive forces on membrane and gas diffusion electrode (GDE) is obtained by micro-computed X-ray tomography (μ-CT). μ-CT imaging confirms that membrane and GDEs undergo severe mechanical stress resulting in performance differences. Irreversible GDL deformation behavior and pinhole formation by GDL fiber penetration into the membrane could be observed.     

Scanning microelectrochemical characterization of the anti-corrosion performance of inhibitor films formed by 2-mercaptobenzimidazole on copper

The aim of this work is to explore the applicability of the scanning electrochemical microscope (SECM) to characterize the inhibiting effect of 2-mercaptobenzimidazole against the corrosion of copper. SECM was operated in the feedback mode by using ferrocene-methanol as redox mediator, and the sample was left unbiased at all times. The kinetic changes in the corrosion processes were monitored over time from the Z-approach curves. Furthermore, inhibitor-modified copper samples presenting various surface finishes were imaged by SECM and the scanning vibrating electrode technique (SVET), allowing changes both in the surface activity of metal-inhibitor films and in the extent of corrosion attack to be spatially resolved. Differences in the local electrochemical activity between inhibitor-free and inhibitor-covered areas of the sample were successfully monitored.     

Understanding the detrimental effect of nitrate presence on EBPR systems: effect of the plant configuration

The interaction between enhanced biological phosphorus removal (EPBR) and biological nitrogen removal may result in EBPR failure in full‐scale wastewater treatment plants (WWTPs). This work studies one of the common causes of this failure: the presence of nitrate in the anaerobic phase, which may act as an inhibitor for polyphosphate accumulating organisms (PAO) activity or may activate the competition between PAO and denitrifying bacteria for the carbon source. Several batch experiments were performed with different carbon sources (acetic acid, propionic acid and sucrose) at different nitrate concentrations using PAO‐enriched sludge from two different pilot plants: an anaerobic/aerobic sequential batch reactor (SBR) and an anaerobic/anoxic/aerobic (A²/O) continuous plant. The results imply that the operational conditions of the A²/O pilot plant selected a PAO population capable of i) coexisting with nitrate without an inhibitory effect and ii) outcompeting denitrifying bacteria for the carbon source, in contrast to the SBR pilot plant where nitrate had an inhibitory effect on EBPR. Copyright © 2012 Society of Chemical Industry     

Stabilization of apoflavodoxin by replacing hydrogen-bonded charged Asp or Glu residues by the neutral isosteric Asn or Gln

Knowledge of protein stability principles provides a means toincrease protein stability in a rational way. Here we explorethe feasibility of stabilizing proteins by replacing solvent-exposedhydrogen-bonded charged Asp or Glu residues by the neutral isostericAsn or Gln. The rationale behind this is a previous observationthat, in some cases, neutral hydrogen bonds may be more stablethat charged ones. We identified, in the apoflavodoxin fromAnabaena PCC 7119, three surface-exposed aspartate or glutamateresidues involved in hydrogen bonding with a single partnerand we mutated them to asparagine or glutamine, respectively.The effect of the mutations on apoflavodoxin stability was measuredby both urea and temperature denaturation. We observed thatthe three mutant proteins are more stable than wild-type (onaverage 0.43 kcal/mol from urea denaturation and 2.8°C froma two-state analysis of fluorescence thermal unfolding data).At high ionic strength, where potential electrostatic repulsionsin the acidic apoflavodoxin should be masked, the three mutantsare similarly more stable (on average 0.46 kcal/mol). To ruleout further that the stabilization observed is due to removalof electrostatic repulsions in apoflavodoxin upon mutation,we analysed three control mutants and showed that, when thecharged residue mutated to a neutral one is not hydrogen bonded,there is no general stabilizing effect. Replacing hydrogen-bondedcharged Asp or Glu residues by Asn or Gln, respectively, couldbe a straightforward strategy to increase protein stability.     

Effect of cavity surface coating and molding parameters on pressure drop: Developing a new software for rapid calculations

Nowadays, many of the plastic components are aesthetic pieces, and they are fabric, thermoplastic vulcanizates (TPVs), or film coated. In the case of upholstered pieces, they are injected onto a textile tissue introduced into the mold, and they are finished with an edging process. Simulation programs used to optimize the injection process are not able to simulate the injection over fabrics, and therefore, it is difficult to select an injection machine without knowing the pressure drop inside the mold and without knowing how the parameters affect to the injection cycle or to the aesthetic aspect of this kind of pieces. This article presents a software for rapid calculations during the filling phase without the need for complex modeling. The program will be able to calculate pressure drop and other flow parameters that are fundamental for a good design of an industrial mold used in in‐mold decoration (IMD) technique. POLYM. ENG. SCI., 2012. © 2011 Society of Plastics Engineers     

Ablative Properties of Polyurethanes Reinforced with Organoclay

Ablation resistance and mechanical properties of polyurethane-based composites containing different amounts (up to 5 wt%) of organoclay were correlated with the morphological characterization. The crosslinking density of the polyurethane increased with the amount of organoclay. At low concentration (up to 1 wt%), the organoclay was well exfoliated, while at higher concentration, both exfoliated and intercalated platelets were found. A linear correlation was observed between the tensile test and the concentration of organoclay. Erosion velocity decreased 40% with the incorporation of 5% of organoclay. POLYM. ENG. SCI., 60:630–635, 2020. © 2020 Society of Plastics Engineers     

Molecular Recognition in C-Type Lectins: The Cases of DC-SIGN,Langerin, MGL,and L-Sectin

Carbohydrates play a pivotal role in intercellular communication processes. In particular, glycan antigens are key for sustaining homeostasis, helping leukocytes to distinguish damaged tissues and invading pathogens from healthy tissues. From a structural perspective, this cross-talk is fairly complex, and multiple membrane proteins guide these recognition processes, including lectins and Toll-like receptors. Since the beginning of this century, lectins have become potential targets for therapeutics for controlling and/or avoiding the progression of pathologies derived from an incorrect immune outcome, including infectious processes, cancer, or autoimmune diseases. Therefore, a detailed knowledge of these receptors is mandatory for the development of specific treatments. In this review, we summarize the current knowledge about four key C-type lectins whose importance has been steadily growing in recent years, focusing in particular on how glycan recognition takes place at the molecular level, but also looking at recent progresses in the quest for therapeutics.     

NMR Profiling of Exhaled Breath Condensate Defines Different Metabolic Phenotypes of Non-Cystic Fibrosis Bronchiectasis

Nuclear-magnetic-resonance (NMR) profiling of exhaled breath condensate (EBC) provides insights into the pathophysiology of bronchiectasis by identifying specific biomarkers. We evaluated whether NMR-based metabolomics discriminates the EBC-derived metabolic phenotypes (“metabotypes”) of 41 patients with non-cystic fibrosis (nCF) bronchiectasis of various etiology [24 subjects with Primary Ciliary Dyskinesia (PCD); 17 patients with bronchiectasis not associated with PCD (nCF/nPCD)], who were compared to 17 healthy subjects (HS). NMR was used for EBC profiling, and Orthogonal Projections to Latent Structures with partial least-squares discriminant analysis (OPLS-DA) was used as a classifier. The results were validated by using the EBC from 17 PCD patients not included in the primary analysis. Different statistical models were built, which compared nCF/nPCD and HS, PCD and HS, all classes (nCF/nPCD-PCD-HS), and, finally, PCD and nCF/nPCD. In the PCD-nCF/nPCD model, four statistically significant metabolites were able to discriminate between the two groups, with only a minor reduction of the quality parameters. In particular, for nCF/nPCD, acetone/acetoin and methanol increased by 21% and 18%, respectively. In PCD patients, ethanol and lactate increased by 25% and 28%, respectively. They are all related to lung inflammation as methanol is found in the exhaled breath of lung cancer patients, acetone/acetoin produce toxic ROS that damage lung tissue in CF, and lactate is observed in acute inflammation. Interestingly, a high concentration of ethanol hampers cilia beating and can be associated with the genetic defect of PCD. Model validation with 17 PCD samples not included in the primary analysis correctly predicted all samples. Our results indicate that NMR of EBC discriminates nCF/nPCD and PCD bronchiectasis patients from HS, and patients with nCF/nPCD from those with PCD. The metabolites responsible for between-group separation identified specific metabotypes, which characterize bronchiectasis of a different etiology.     

Dendritic Nanotheranostic for the Delivery of Infliximab: A Potential Carrier in Rheumatoid Arthritis Therapy

Antibodies are macromolecules that specifically recognize their target, making them good candidates to be employed in various therapies. The possibility of attaching a drug to an immunoglobulin makes it possible to release it specifically into the affected tissue as long as it overexpresses the target. However, chemical coupling could affect the functionality (specificity and affinity) of the antibody. It has been observed that the use of intermediaries, such as dendrimers, could resolve this issue. Because carbosilane dendrimers have aroused great interest in the field of biomedicine, this report describes the synthesis of an anionic carbosilane dendrimer with a fluorochrome on its surface that then forms a conjugate with an antibody. It has been used as immunoglobulin and infliximab, whose target is TNF-α, which is a cytokine that is overexpressed in the inflamed area or even in the blood of patients with autoimmune diseases, such as rheumatoid arthritis. In addition, the integrity and functionality of the antibody has been studied to see if they have been affected after the chemical coupling process.