The Effect of Relationship Characteristics and Relational Communication on Experiences of Hurt From Romantic Partners

This study expands the relational turbulence model (RTM; Solomon & Knobloch,) by theorizing about how characteristics of relationships and relational judgments influence people's experiences of hurtful messages. Previous applications of RTM to hurt have uncovered associations among relational characteristics that influence people's hurtful experiences; however, the process by which these characteristics influence experiences of hurt remains unclear. We propose that relational communication (specifically, perceptions of dominance, and disaffiliation) is the mechanism linking relational qualities to hurt. A multigroup SEM was conducted to test for the possibility of sex differences. Results showed that people's experiences of hurt vary as a function of both relationship characteristics and relational inferences. Results also indicated a difference in path coefficients for males and females.     

Vapor Annealing as a Post-Processing Technique to Control Carrier Concentrations of Bi<Subscript>2</Subscript>Te<Subscript>3</Subscript> Thin Films

This article demonstrates that carrier concentrations in bismuth telluride films can be controlled through annealing in controlled vapor pressures of tellurium. For the bismuth telluride source with a small excess of tellurium, all the films reached a steady state carrier concentration of 4 × 10¹⁹ carriers/cm³ with Seebeck coefficients of −170 μV K⁻¹. For temperatures below 300°C and for film thicknesses of 0.4 μm or less, the rate-limiting step in reaching a steady state for the carrier concentration appeared to be the mass transport of tellurium through the gas phase. At higher temperatures, with the resulting higher pressures of tellurium or for thicker films, it was expected that mass transport through the solid would become rate limiting. The mobility also changed with annealing, but at a rate different from that of the carrier concentration, perhaps as a consequence of the non-equilibrium concentration of defects trapped in the films studied by the low temperature synthesis approach.     

Direct‐Write Assembly of Microperiodic Silk Fibroin Scaffolds for Tissue Engineering Applications

Three–dimensional, microperiodic scaffolds of regenerated silk fibroin have been fabricated for tissue engineering by direct ink writing. The ink, which consisted of silk fibroin solution from the Bombyx mori silkworm, was deposited in a layer‐by‐layer fashion through a fine nozzle to produce a 3D array of silk fibers of diameter 5 µm. The extruded fibers crystallized when deposited into a methanol‐rich reservoir, retaining a pore structure necessary for media transport. The rheological properties of the silk fibroin solutions were investigated and the crystallized silk fibers were characterized for structure and mechanical properties by infrared spectroscopy and nanoindentation, respectively. The scaffolds supported human bone marrow‐derived mesenchymal stem cell (hMSC) adhesion, and growth. Cells cultured under chondrogenic conditions on these scaffolds supported enhanced chondrogenic differentiation based on increased glucosaminoglycan production compared to standard pellet culture. Our results suggest that 3D silk fibroin scaffolds may find potential application as tissue engineering constructs due to the precise control of their scaffold architecture and their biocompatibility.     

Mathematical analysis of lead field expansions

The solution to the bioelectromagnetic inverse problem is discussed in terms of a generalized lead field expansion, extended to weights depending polynomially on the current strength. The expansion coefficients are obtained from the resulting system of equations which relate the lead field expansion to the data. The framework supports a family of algorithms which include the class of minimum norm solutions and those of weighted minimum norm, including FOCUSS (suitably modified to conform to requirements of rotational invariance). The weighted-minimum-norm family is discussed in some detail, making explicit the dependence (or independence) of the weighting scheme on the modulus of the unknown current density vector. For all but the linear case, and with a single power in the weight, a highly nonlinear system of equations results. These are analyzed and their solution reduced to tractable problems for a finite number of degrees of freedom. In the simplest magnetic field tomography (MFT) case, this is shown to possess expected properties for localized distributed sources. A sensitivity analysis supports this conclusion.     

Printing Reconfigurable Bundles of Dielectric Elastomer Fibers

Active soft materials that change shape on demand are of interest for a myriad of applications, including soft robotics, biomedical devices, and adaptive systems. Despite recent advances, the ability to rapidly design and fabricate active matter in complex, reconfigurable layouts remains challenging. Here, the 3D printing of core-sheath-shell dielectric elastomer fibers (DEF) and fiber bundles with programmable actuation is reported. Complex shape morphing responses are achieved by printing individually addressable fibers within 3D architectures, including vertical coils and fiber bundles. These DEF devices exhibit resonance frequencies up to 700 Hz and lifetimes exceeding 2.6 million cycles. The multimaterial, multicore-shell 3D printing method opens new avenues for creating active soft matter with fast programable actuation.     

Quantification of Temperature-Dependent Charge Separation and Recombination Dynamics in Non-Fullerene Organic Photovoltaics

Transient optical spectroscopy is used to quantify the temperature-dependence of charge separation and recombination dynamics in P3TEA:SF-PDI₂ and PM6:Y6, two non-fullerene organic photovoltaic (OPV) systems with a negligible driving force and high photocurrent quantum yields. By tracking the intensity of the transient electroabsorption response that arises upon interfacial charge separation in P3TEA:SF-PDI₂, a free charge generation rate constant of ≈2.4 × 10¹⁰ s⁻¹ is observed at room temperature, with an average energy of ≈230 meV stored between the interfacial charge pairs. Thermally activated charge separation is also observed in PM6:Y6, and a faster charge separation rate of ≈5.5 × 10¹⁰ s⁻¹ is estimated at room temperature, which is consistent with the higher device efficiency. When both blends are cooled down to cryogenic temperature, the reduced charge separation rate leads to increasing charge recombination either directly at the donor-acceptor interface or via the emissive singlet exciton state. A kinetic model is used to rationalize the results, showing that although photogenerated charges have to overcome a significant Coulomb potential to generate free carriers, OPV blends can achieve high photocurrent generation yields given that the thermal dissociation rate of charges outcompetes the recombination rate.     

Long‐Term Electrical and Mechanical Function Monitoring of a Human‐on‐a‐Chip System

The goal of human‐on‐a‐chip systems is to capture multiorgan complexity and predict the human response to compounds within physiologically relevant platforms. The generation and characterization of such systems is currently a focal point of research given the long‐standing inadequacies of conventional techniques for predicting human outcome. Functional systems can measure and quantify key cellular mechanisms that correlate with the physiological status of a tissue, and can be used to evaluate therapeutic challenges utilizing many of the same endpoints used in animal experiments or clinical trials. Culturing multiple organ compartments in a platform creates a more physiologic environment (organ–organ communication). Here is reported a human 4‐organ system composed of heart, liver, skeletal muscle, and nervous system modules that maintains cellular viability and function over 28 days in serum‐free conditions using a pumpless system. The integration of noninvasive electrical evaluation of neurons and cardiac cells and mechanical determination of cardiac and skeletal muscle contraction allows the monitoring of cellular function, especially for chronic toxicity studies in vitro. The 28‐day period is the minimum timeframe for animal studies to evaluate repeat dose toxicity. This technology can be a relevant alternative to animal testing by monitoring multiorgan function upon long‐term chemical exposure.     

Optical Communication Using Subcarrier PSK Intensity Modulation Through Atmospheric Turbulence Channels

This paper studies optical communications using subcarrier phase shift keying (PSK) intensity modulation through atmospheric turbulence channels. The bit error rate (BER) is derived for optical communication systems employing either on/off key (OOK) or subcarrier PSK intensity modulation. It is shown that at BER = 10^-6 and a scintillation level of sigma = 0.1, an optical communication system employing subcarrier BPSK is 3 dB better than a comparable system using fixed-threshold OOK. When sigma = 0.2, an optical communication system employing subcarrier BPSK achieves a BER = 10^-6 at SNR = 13.7 dB, while the BER of a comparable system employing OOK can never be less than 10^-4. Convolutional codes are discussed for optical communication through atmospheric turbulence channels. Interleaving is employed to overcome memory effect in atmospheric turbulence channels. An upper bound on BER is derived for optical communication systems employing convolutional codes and subcarrier BPSK modulation.     

Toward a Theory Relating Political Discourse, Media, and Public Opinion

This paper presents a multimethod investigation of framing in the government–media–public interaction during the so-called partial-birth abortion (PBA) debate in the U.S. Operationalizing framing as the use of the word "baby" or "fetus," content analysis first shows that opposing political elites employed almost exclusive vocabularies in attempts to justify their views and shape attitudes. Time-series analysis then charts the path of "baby's" discursive dominance from congressional discourse through news and editorials to citizens. Finally, experimental results support 2 microlevel hypotheses. First, uptake—exposure to articles featuring the exclusive use of "baby" or "fetus," respectively, increased or decreased support for banning PBA. Second, emergence—participants exposed to discourse using both terms converged upon a response independent of the words' relative proportions. In contrast to probabilistic survey response models, these findings support the idea that a kind of public reason can emerge from the interaction of citizens' judgment processes and elite communication.     

Thermoelectric quantum-dot superlattices with high ZT

Following the experimentally observed Seebeck coefficient enhancement in PbTe quantum wells in Pb_1−xEu_xTe/PbTe multiple-quantum-well structures which indicated the potential usefulness of low dimensionality, we have investigated the thermoelectric properties of PbSe_xTe_1−x/PbTe quantum-dot superlattices for possible improved thermoelectric materials. We have again found enhancements in Seebeck coefficient and thermoelectric figure of merit (ZT) relative to bulk values, which occur through the various physics and materials science phenomena associated with the quantum-dot structures. To date, we have obtained estimated ZT values approximately double the best bulk PbTe values, with estimated ZT as high as about 0.9 at 300 K.