Aurora Kinase A Is Involved in Controlling the Localization of Aquaporin-2 in Renal Principal Cells

The cAMP-dependent aquaporin-2 (AQP2) redistribution from intracellular vesicles into the plasma membrane of renal collecting duct principal cells induces water reabsorption and fine-tunes body water homeostasis. However, the mechanisms controlling the localization of AQP2 are not understood in detail. Using immortalized mouse medullary collecting duct (MCD4) and primary rat inner medullary collecting duct (IMCD) cells as model systems, we here discovered a key regulatory role of Aurora kinase A (AURKA) in the control of AQP2. The AURKA-selective inhibitor Aurora-A inhibitor I and novel derivatives as well as a structurally different inhibitor, Alisertib, prevented the cAMP-induced redistribution of AQP2. Aurora-A inhibitor I led to a depolymerization of actin stress fibers, which serve as tracks for the translocation of AQP2-bearing vesicles to the plasma membrane. The phosphorylation of cofilin-1 (CFL1) inactivates the actin-depolymerizing function of CFL1. Aurora-A inhibitor I decreased the CFL1 phosphorylation, accounting for the removal of the actin stress fibers and the inhibition of the redistribution of AQP2. Surprisingly, Alisertib caused an increase in actin stress fibers and did not affect CFL1 phosphorylation, indicating that AURKA exerts its control over AQP2 through different mechanisms. An involvement of AURKA and CFL1 in the control of the localization of AQP2 was hitherto unknown.     

The effect of cocoa fermentation and weak organic acids on growth and ochratoxin A production by Aspergillus species

The acidic characteristics of cocoa beans have influence on flavor development in chocolate. Cocoa cotyledons are not naturally acidic, the acidity comes from organic acids produced by the fermentative microorganisms which grow during the processing of cocoa. Different concentrations of these metabolites can be produced according to the fermentation practices adopted in the farms, which could affect the growth and ochratoxin A production by fungi. This work presents two independent experiments carried out to investigate the effect of some fermentation practices on ochratoxin A production by Aspergillus carbonarius in cocoa, and the effect of weak organic acids such as acetic, lactic and citric at different pH values on growth and ochratoxin A production by A. carbonarius and Aspergillus niger in culture media. A statistical difference (ρ<0.05) in the ochratoxin A level in the cured cocoa beans was observed in some fermentation practices adopted. The laboratorial studies demonstrate the influence of organic acids on fungal growth and ochratoxin A production, with differences according to the media pH and the organic acid present. Acetic acid was the most inhibitory acid against A. carbonarius and A. niger. From the point of view of food safety, considering the amount of ochratoxin A produced, fermentation practices should be conducted towards the enhancement of acetic acid, although lactic and citric acids also have an important role in lowering the pH to improve the toxicity of acetic acid.     

Gewinnung leichter Kohlenwasserstoffe aus schweren Ölen — Verfahren und Entwicklungen

Manufacture of light hydrocarbons from heavy oils – processes and developments . High quality crude oils are running short and their price continues to increase. At the same time there is a trend towards light petroleum products for use as transportation fuels or petrochemical raw materials. Consequently, the conversion of heavy oils, i.e., particularly distillation residues but also heavy oils from tar sands, is gaining increasing commercial importance. The cracking processes currently used in the refining industry are reviewed. Emphasis is placed on their application to metal-and asphaltene-containing heavy oils. Feed pretreatment by solvent deasphalting is discussed and the manufacture of syncrude from tar sands is considered. New developments for conversion of heavy oils are outlined. The future production of shale oil and of transportation fuels from oil shale is briefly treated.     

The Falling Lake Victoria Water Level: GRACE,TRIMM and CHAMP Satellite Analysis of the Lake Basin

In the last 5 years, Lake Victoria water level has seen a dramatic fall that has caused alarm to water resource managers. Since the lake basin contributes about 20% of the lakes water in form of discharge, with 80% coming from direct rainfall, this study undertook a satellite analysis of the entire lake basin in an attempt to establish the cause of the decline. Gravity Recovery And Climate Experiment (GRACE), Tropical Rainfall Measuring Mission (TRMM) and CHAllenging Minisatellite Payload (CHAMP) satellites were employed in the analysis. Using 45 months of data spanning a period of 4 years (2002–2006), GRACE satellite data are used to analyse the variation of the geoid (equipotential surface approximating the mean sea level) triggered by variation in the stored waters within the lake basin. TRMM Level 3 monthly data for the same period of time are used to compute mean rainfall for a spatial coverage of .25°×.25° (25×25 km) and the rainfall trend over the same period analyzed. To assess the effect of evaporation, 59 CHAMP satellite’s occultation for the period 2001 to 2006 are analyzed for tropopause warming. GRACE results indicate an annual fall in the geoid by 1.574 mm/year during the study period 2002–2006. This fall clearly demonstrates the basin losing water over these period. TRMM results on the other hand indicate the rainfall over the basin (and directly over the lake) to have been stable during this period. The CHAMP satellite results indicate the tropopause temperature to have fallen in 2002 by about 3.9 K and increased by 2.2 K in 2003 and remained above the 189.5 K value of 2002. The tropopause heights have shown a steady increase from a height of 16.72 m in 2001 and has remained above this value reaching a maximum of 17.59 km in 2005, an increase in height by 0.87 m. Though the basin discharge contributes only 20%, its decline has contributed to the fall in the lake waters. Since rainfall over the period remained stable, and temperatures did not increase drastically to cause massive evaporation, the remaining major contributor is the discharge from the expanded Owen Falls dam.     

The Role of Plasma Extracellular Vesicles in Remote Ischemic Conditioning and Exercise-Induced Ischemic Tolerance

Ischemic conditioning and exercise have been suggested for protecting against brain ischemia-reperfusion injury. However, the endogenous protective mechanisms stimulated by these interventions remain unclear. Here, in a comprehensive translational study, we investigated the protective role of extracellular vesicles (EVs) released after remote ischemic conditioning (RIC), blood flow restricted resistance exercise (BFRRE), or high-load resistance exercise (HLRE). Blood samples were collected from human participants before and at serial time points after intervention. RIC and BFRRE plasma EVs released early after stimulation improved viability of endothelial cells subjected to oxygen-glucose deprivation. Furthermore, post-RIC EVs accumulated in the ischemic area of a stroke mouse model, and a mean decrease in infarct volume was observed for post-RIC EVs, although not reaching statistical significance. Thus, circulating EVs induced by RIC and BFRRE can mediate protection, but the in vivo and translational effects of conditioned EVs require further experimental verification.     

Extraction of heavy metals from soils using biodegradable chelating agents

Metal pollution of soils is widespread across the globe, and the clean up of these soils is a difficulttask. One possible remediation technique is ex-situ soil washing using chelating agents. Ethylenediaminetetraacetic acid (EDTA) is a very effective chelating agent for this purpose but has the disadvantage that it is quite persistent in the environment due to its low biodegradability. The aim of our work was to investigate the biodegradable chelating agents [S,S]-ethylenediaminedisuccinic acid (EDDS), iminodisuccinic acid (IDSA), methylglycine diacetic acid (MGDA), and nitrilotriacetic acid (NTA) as potential alternatives and compare them with EDTA for effectiveness. Kinetic experiments showed for all metals and soils that 24 h was the optimum extraction time. Longer times only gave minor additional benefits for heavy metal extraction but an unwanted increase in iron mobilization. For Cu at pH 7, the order of the extraction efficiency for equimolar ratios of chelating agent to metal was EDDS > NTA> IDSA > MGDA > EDTA and for Zn it was NTA > EDDS > EDTA >MGDA > IDSA. The comparatively low efficiency of EDTA resulted from competition between the heavy metals and co-extracted Ca. For Pb the order of extraction was EDTA > NTA >EDDS due to the much stronger complexation of Pb by EDTA compared to EDDS. At higher concentration of complexing agent, less difference between the agents was found and less pH dependence. There was an increase in heavy metal extraction with decreasing pH, but this was offset by an increase in Ca and Fe extraction. In sequential extractions EDDS extracted metals almost exclusively from the exchangeable, mobile, and Mn-oxide fractions. We conclude that the extraction with EDDS at pH 7 showed the best compromise between extraction efficiency for Cu, Zn, and Pb and loss of Ca and Fe from the soil.     

Profiling glucosinolates in vegetative and reproductive tissues of four Brassica species of the U‐triangle for their biofumigation potential

Glucosinolates are amino acid derived allelochemicals present in all plants of the order Capparales. These compounds are degraded by myrosinase isoenzymes, releasing a series of biologically active products defined by the parent glucosinolate and the reaction conditions. Species within the Brassicaceae are found to differ in their glucosinolate profile and glucosinolate concentrations. Different tissues within a single plant also show such variations, which are further influenced by the growth stage and environmental conditions. In the experiments described in this paper, four Brassica species of the U‐triangle (B. carinata, B. nigra, B. juncea and B. rapa) were compared with respect to their glucosinolate profiles in roots, stems, leaves and reproductive organs at different developmental stages. The glucosinolate profile of corresponding ripe seeds was also determined. Prop‐2‐enylglucosinolate was identified as the major glucosinolate in the three mustards, where it represented over 90% of the total glucosinolate concentration of ripe seeds and over 50% of green tissues. The relative concentration of this glucosinolate increased in all tissues during plant growth. Brassica rapa showed a different glucosinolate profile than the three mustards, with higher concentrations of but‐3‐enylglucosinolate, 2‐hydroxybut‐3‐enylglucosinolate and 2‐hydroxypent‐4‐enylglucosinolate. The concentration of indol‐3‐ylmethylglucosinolates was also higher in B. rapa than in the mustard plants, with 4‐hydroxyglucobrassicin representing 30% of the total glucosinolate concentration in ripe seeds. The total glucosinolate concentration of the species studied varied with growth stage and the mustards achieved a maximum towards the end of the period monitored. Glucosinolate concentration decreased in roots and leaves but increased in reproductive tissues. The determined glucosinolate profiles are an initial step in assessing the biofumigation potential of these species of the Brassicaceae family. Copyright © 2007 Society of Chemical Industry     

Growth and characterization of gold catalyzed SiGe nanowires and alternative metal-catalyzed Si nanowires

The growth of semiconductor (SC) nanowires (NW) by CVD using Au-catalyzed VLS process has been widely studied over the past few years. Among others SC, it is possible to grow pure Si or SiGe NW thanks to these techniques. Nevertheless, Au could deteriorate the electric properties of SC and the use of other metal catalysts will be mandatory if NW are to be designed for innovating electronic. First, this article's focus will be on SiGe NW's growth using Au catalyst. The authors managed to grow SiGe NW between 350 and 400°C. Ge concentration (x) in Si1-xGex NW has been successfully varied by modifying the gas flow ratio: R = GeH4/(SiH4 + GeH4). Characterization (by Raman spectroscopy and XRD) revealed concentrations varying from 0.2 to 0.46 on NW grown at 375°C, with R varying from 0.05 to 0.15. Second, the results of Si NW growths by CVD using alternatives catalysts such as platinum-, palladium- and nickel-silicides are presented. This study, carried out on a LPCVD furnace, aimed at defining Si NW growth conditions when using such catalysts. Since the growth temperatures investigated are lower than the eutectic temperatures of these Si-metal alloys, VSS growth is expected and observed. Different temperatures and HCl flow rates have been tested with the aim of minimizing 2D growth which induces an important tapering of the NW. Finally, mechanical characterization of single NW has been carried out using an AFM method developed at the LTM. It consists in measuring the deflection of an AFM tip while performing approach-retract curves at various positions along the length of a cantilevered NW. This approach allows the measurement of as-grown single NW's Young modulus and spring constant, and alleviates uncertainties inherent in single point measurement.     

Nonparametric Autoregression with Multiplicative Volatility and Additive mean

For over a decade, nonparametric modelling has been successfully applied to studying nonlinear structures in financial time series. It is well known that the usual nonparametric models often have less than satisfactory performance when dealing with more than one lag. When the mean has an additive structure, however, better estimation methods are available which fully exploit such a structure. Although in the past such nonparametric applications had been focused more on the estimation of the conditional mean, it is equally if not more important to measure the future risk of the series along with the mean. For the volatility function, i.e. the conditional variance given the past, a multiplicative structure is more appropriate than an additive structure, as the volatility is a positive scale function and a multiplicative model provides a better interpretation of each lagged value's influence on such a function. In this paper we consider the joint estimation of both the additive mean and the multiplicative volatility. The technique used is marginally integrated local polynomial estimation. The procedure is applied to the deutschmark/US dollar daily exchange returns.