Resource optimization algorithm of combination of NFV and SDN for application of multiple services

Various services of internet of things (IoT) require flexible network deployment to guarantee different quality of service (QoS).Aiming at the problem of IoT service function chain deployment,network function virtualization (NFV) and software defined networking (SDN) were combined to optimize resources.Considering forwarding cost and traffic load balance,a joint optimization model of virtual network function placement and service function chain routing was given and was proved to be NP-Hard.In order to solve this model,two heuristic algorithms were proposed.One was the service chain deployment algorithm of first routing then placing (FRTP) and the other was the placing followed by routing (PFBR) based on node priority.Simulation results demonstrate that FRTP and PFBR algorithm can significantly balance network traffic load while alleviating congestion and improving the acceptance ratio of the chain requests compared with other algorithms.     

红外焦平面阵列非均匀性自适应校正算法研究

在分析红外焦平面阵列非均匀性校正现行算法的基础上,提出了一种具有自适应性能的新算法。该算法以小波变换中的滤波器理论为基础,通过将图像序列在时间域的尺度分解和相庆统计量计算,获得在红外焦平面校正中起影响的偏置和增益系数。模拟实验结果验证了其有效性和先进性。     

自适应电话网关的网络存储系统

基于目前解决存储瓶颈的各种技术受到各环节性能极限的约束,本文提出的自适应网络存储系统采用设计独特的可扩展双通道存储体系结构,综合利用各种I／O技术,解决了I／O密集型应用的存储瓶颈。     

一种新的变步长LMS自适应算法及其在自适应噪声对消中的应用

许多时变步长(VSS)自适应算法已经提出用来完善标准LMS算法的性能,但实验表明这些算法容易受噪声干扰.本文介绍了一种新的变步长LMS自适应算法,这种算法保证了较小的失调,同时使算法在自适应初始阶段有较快的收敛速度.该算法的优越性在于它不受已经存在的不相关噪声的干扰.本文对该算法的收敛性和稳定性进行了分析,并将该算法应用于自适应噪声对消的仿真实验中,给出了计算机的仿真结果.     

自动步枪激光模拟射击系统

介绍一种自动步枪激光模拟射击系统,它具有弹着点实时显示、实时语音报靶及成绩统计等功能,射击精度高,电脑显示弹着点与实际位置误差小于2mm;为射击训练提供一种安全、高效、仿真(使用空包弹)激光模拟射击训练系统。     

A New Architecture for Nonblocking Optical Switching Networks

With the current technology, all-optical networks require nonblocking switch architectures for building optical cross-connects. The crossbar switch has been widely used for building an optical cross-connect due to its simple routing algorithm and short path setup time. It is known that the crossbar suffers from huge signal loss and crosstalk. The Clos network uses a crossbar as building block and reduces switch complexity, but it does not significantly reduce signal loss and crosstalk. Although the Spanke's network eliminates the crosstalk problem, it increases the number of switching elements required considerably (to 2N ² - 2N). In this paper, we propose a new architecture for building nonblocking optical switching networks that has much lower signal loss and crosstalk than the crossbar without increasing switch complexity. Using this architecture we can build non-squared nonblocking networks that can be used as building block for the Clos network. The resulting Clos network will then have not only lower signal loss and crosstalk but also a lower switch complexity.     

Friction modeling and adaptive compensation using a relay feedbackapproach

In this paper, the application of a dual-relay feedback approach toward modeling of frictional effects in servomechanisms is addressed. The friction model consists of Coulomb and viscous friction components, both of which can be automatically extracted from suitably designed relay experiments. At the same time, the dynamical model of the servomechanical system can be obtained from the experiments. Thus, a proportional-integral-derivative feedback motion controller and a feedforward friction compensator can be automatically tuned in this manner. The friction model obtained is also directly applicable to initialization of an adaptive control scheme proposed. Results from simulation and experiments are presented to illustrate the practical appeal of the proposed method     

Characteristic analysis of coupled HTS interconnects withtwo-dimensional FDTD

In this work, the frequency-dependent RLGC parameters of high-speed coupled high T_c superconductor (HTS) interconnects are extracted with a two-dimensional (2-D) FDTD algorithm. The response signals of an HTS interconnect circuit and a normal Al interconnect circuit are simulated and compared, showing that not only the signal dispersion, delay, and magnitude decay of HTS interconnects are smaller than that of Al interconnects, the crosstalk of HTS interconnects is much smaller, too     

利用集成光学调制器实现ICF固体激光驱动器中激光脉冲任意整形 Ⅱ.集成光学调制器

本文利用集成光学和光纤技术制作了集成光学调制器,驱动调制器的电压仅为４伏,配之以高稳定的、ＬＤ泵浦的单纵模振荡源和任意整形电脉冲源,大大提高了ＩＣＦ固体激光驱动器前级整形系统对激光脉冲整形的稳定性和灵活性．     

无源光网络的初步升级方案

利用 13 10nm/ 15 5 0nm粗波分复用器 (CWDM)与 15 5 0nm光纤型带内耦合器 (OFIBC) ,提出了无源光网络(PON)的初步升级方案 ,CWDM与OFIBC复用器大的通带间隔与温度不敏感性保证了可以采用现行的无制冷的F P腔激光器 ,实验表明根据OFIBC的通带 ,选择激光器中心波长 ,系统可以达到具有较小的功率损耗与串扰。