数字多用表的比例功能在电阻箱检测中的应用

本文提出了检测电阻箱的一种新方法--比例法.文章除介绍其原理和方法外,还对装置的不确定度进行了分析,并对比例法检测数据和数表法直接测量的检定结果进行比对.比例法检测电阻箱的特点是对标准器和辅助设备的要求低、工作效率高并可实现半自动检定.拥有数字多用表和标准电阻的检测部门可利用本方法.     

Fabrication of thick BOX SOI by Smart-cut technology

A SOI material with thick BOX (2.2 μm) was successfully fabricated using the Smart-cut technology. The thick BOX SOI microstructures were investigated by high resolution cross-sectional transmission electron mi-croscopy (XTEM), while the electrical properties were studied by the spreading resistance profile (SRP). Experimen-tal results demonstrate that both structural and electrical properties of the SOI structure are very good.     

对我国高等职业教育人才培养的分析与思考

高等职业教育是我国现代高等教育的重要组成部分,其培养目标是实用型、应用型的高级专门人才。如何使高等职业教育培养的人才更适应社会经济发展的需要是摆在每一所高职学校面前的重要课题。文章认为目前高职教育的办学层次未尽合理,人才培养过程难以反映出职业技术教育的特点,并就此提出了若干建议。     

计算铁心附加损耗系数的公式推导及其验证

阐述了铁心空载损耗产生的原因，分析推导了二片一叠铁心附加损耗系数的计算公式，给出了不同结构铁心附加损耗系数的计算式，并通过实例加以验证。     

彩色平板玻璃的色度计算

通过数值分析，运用解析几何原理推导出计算彩色玻璃三个参数（主波长、纯度和亮度）的数学模型，编制出计算程序。利用彩色玻璃的单色光透过率，通过该程序可以快速、准确地计算该玻璃的色度值，鉴定该颜色的质量。     

飞艇和软索跨越用于张力放线可行性研究

采用飞艇和软索跨越,是定性地从专用范围及使用新材料方面,对现在电网建设复杂环境下的架线施工新方案进行分析研究,并对其实施方案和经济指标进行可行性探讨.     

Investigation of elastic modulus of nanoporous alumina membrane

Nanoporous alumina membranes containing parallel regular pores of uniform size and normal to substrate surface were fabricated by anodically oxidizing high purity aluminum foils in acid solutions and their elastic modulus was investigated. The continuous out-of-plane displacement and current load of the porous membranes were obtained through bulge test combining real-time ESPI (electronic speckle pattern interferometry) observation system. Then the elastic modulus was calculated through an analytical model and the pore distortion after load was characterized by HRSEM (high resolution scan electron microscope). Measurement of mechanical properties indicates unusual mechanical behavior of these anodic alumina films compared with bulk alumina materials. This observation may help shed light on fracture mechanism of these films with nanopore arrays and bring further understanding on connecting of micro-meso structure and mechanical properties.     

K23JK-R气控截止阀的应用

介绍了K23JK—R气控截止阀的结构，并对其应用应注意的几点问题进行详细论述。     

气体分析法测定岩棉中甲醛释放量影响因素探讨

针对利用气体分析法测定岩棉中甲醛释放量的影响因素展开研究,从试验舱背景、洗瓶水的更换、硅胶有效性以及供气系统气密性等因素展开验证分析。结果表明,在洗瓶水甲醛含量未饱和的状态下,试验舱背景和洗瓶水的更换对试验结果没有明显影响,硅胶有效性和供气系统气密性对试验数据影响较大,其中供气系统气密性同时对硅胶有效性有显著影响,对试验结果影响最大。     

水产品加工废水深度处理的试验

进行了用"生物接触氧化-微滤膜"组合工艺对水产品加工废水深度处理的试验研究.试验结果表明:在进水COD约900~1 200 ms/L,水力停留时间>16 h的情况下,平均出水COD<50 ms/t,达到再生水杂用水质标准.同时,研究探讨了处理过程中膜组件的污染及清洗问题,为实际工程中膜的运行提供了必要的参考.