Reduction of optical beat interference using gain-saturated RSOA in upstream WDM/SCM optical links

A new scheme for reducing optical beat interference (OBI) noise in optical network units is proposed for subcarrier multiplexing-based access network applications. The optical spectrum of the transmit lasers is broadened by using a radio frequency (RF) clipping tone with a modulation depth greater than one. This reduces the impact of the OBI noise. The distortions caused by an RF clipping tone are also suppressed by introducing a gain-saturated reflective optical amplifier, which shows the characteristics of high-pass filter. The proposed scheme has been verified by measuring the error vector magnitude of 16QAM signal with 20 Mbps. Error-free transmission has been achieved even when the light of OBI-noise-causing lasers is stronger than that of the signal laser by 7 dB     

齿轮键槽拉削胎具

我公司生产的150C刮板机斜齿轮和40t刮板机斜齿轮、正齿轮双键槽(如图1),一直采用插床加工,生产效率低,满足不了产品的生产需要。为此,我们改用拉床拉削键槽,设计制作了如图2所示的键槽拉胎。     

Wavelength and repetition rate tunable optical pulse source using a chirped fiber Bragg grating and a nonlinear optical loop mirror

We experimentally demonstrate a simple and novel scheme for tunable real-repetition-rate multiplication, based on the combined use of fractional Talbot effect in a linearly tunable chirped fiber Bragg grating (FBG) and cross-phase modulation (XPM) effect in a nonlinear optical loop mirror (NOLM). By tuning the group-velocity dispersion of the chirped FBG fabricated with the S-bending method using a uniform FBG, we obtain high quality pulses at pseudorepetition rates of 20/spl sim/50 GHz from an original 8.5-ps 10-GHz soliton pulse train. We subsequently convert this pseudorate multiplication into a real-rate multiplication using XPM effect in an NOLM. A wavelength tuning is also achieved over a /spl sim/15-nm range.     

Cu—Zn—Al系合金热弹性马氏体相变的热滞

本文通过热处理工艺及添加第四组元研究了Cu－Zn－Al系记忆合金的相变热滞。结果表明，淬火冷却速度影响合金的相变热滞大小，随着母相时效时间的延长，马氏体相变热滞变大．Mn元素的加入可以减小CU－Zn－Al合金相变热滞．     

失水山梨醇倍半油酸酯的合成

考察了合成乳化剂失水山梨醇倍半油酸酯（ＡｒｌａｃｅｌＣ）的原料配比、反应温度、反应时间、催化剂用量对产品性能的影响，并找到了最佳反应条件．     

屏蔽暂堵反排解堵效率的实验分析

在一定实验条件下，屏蔽暂堵的反排解堵效率随压差、温度的增大而增大，反排解堵在很短的时间内就可完成。一般的反排解堵率都在60％以上，但反徘不能完全解堵。     

石英玻璃结构调整和二阶非线性光学效应产生机制的理论研究

从非谐振动理论观点出发．考虑到玻璃在外场及加热条件下结构取向调整和弛豫，对外部静电场和加热的温度及加热时间对其信频光产生的影响进行了探讨性理论研究，结果较好地解释了有关实验现象。     

System reliability estimation using simulation combined with network reductions

This paper proposes a dynamic Monte Carlo sampling method, called the conditional minimal cut set (COMICS) algorithm, where all arcs are not simulated at each trial and all minimal cut sets need not be given in advance. The proposed algorithm repeats simulating a minimal cut set composed of the arcs which originate from the (new) source node and reducing the network on the basis of the states of simulated arcs until the s-t connectedness is confirmed. We develop the importance sampling estimator, the total hazard estimator and the hazard importance sampling estimator which are all based on the proposed algorithm, and compare the performance of these simulation estimators. It is found that these estimators can significantly reduce the variance of the raw simulation estimator and the usual importance sampling estimator.     

粉末材料中微夹杂缺陷的超声波检验

介绍了用超声波方法检测微夹杂缺陷的一些试验结果，比较了不同频率、不同试验方法检测能力的差异，并通过解剖试验对检出缺陷的性质、尺寸作了比较。     

Interdiffusion behavior of Hg in HgTe/CdTe superlattices grown on Cd0.96Zn0.04 Te (211)B substrates by molecular beam epitaxy

Double-crystal x-ray rocking curve (DCRC) and secondary-ion mass-spectroscopy (SIMS) measurements have been performed to investigate the effect of rapid thermal annealing on the interdiffusion behavior of Hg in HgTe/CdTe superlattices grown on Cd_0.96Zn_0.04Te (211)B substrates by molecular beam epitaxy. The sharp satellite peaks of the DCRC measurements on a 100-period HgTe/CdTe (100Å/100Å) superlattice show a periodic arrangement of the superlattice with high-quality interfaces. The negative direction of the entropy change obtained from the diffusion coefficients as a function of the reciprocal of the temperature after RTA indicates that the Hg diffusion for the annealed HgTe/CdTe superlattice is caused by an interstitial mechanism. The Cd and the Hg concentration profiles near the annealed HgTe/CdTe superlattice interfaces, as measured by SIMS, show a nonlinear behavior for Hg, originating from the interstitial diffusion mechanism of the Hg composition. These results indicate that a nonlinear interdiffusion behavior is dominant for HgTe/CdTe superlattices annealed at 190°C and that the rectangular shape of HgTe/CdTe superlattices may change to a parabolic shape because of the intermixing of Hg and Cd due to the thermal treatment.