一种新型背面接触式H~+-ISFET

简要地介绍了氢离子敏场效应晶体管(H~+-ISFET)的基本结构和工作原理,提出了一种新型背面接触式H~+-ISFET。对该结构在版图、工艺设计中的有关问题,进行了探讨。最后指出:它在pH值的测量中有较好的实用价值。     

基于遗传算法的工作辊温度场参数优化模型

针对热连轧机工作辊热辊形计算中温度场模型的热交换等参数难以确定的问题 ,建立了基于遗传算法的参数优化模型 ,可以解决复杂条件下的热参数的求解问题。利用优化参数计算的轧辊温度场与实际测量结果一致。     

低铁耗条件下转炉高碳低磷工艺实践与应用

对转炉炼钢实现低铁耗和高碳低磷工艺进行了分析，介绍了南钢公司转炉炼钢实践低铁耗条件下高碳低磷工艺的具体应用措施。     

Miniaturized Hexagonal Stepped-Impedance Resonators and Their Applications to Filters

Miniaturized hexagonal stepped-impedance resonators and their applications to bandpass filters are presented. Based on the odd- and even-mode equivalent circuits, the resonance characteristics of these resonators are investigated. A series of circuit configurations, including the third-order Chebyshev, trisection, and fifth-order cascaded trisection filters, are constructed by the proposed resonators. These filters are very compact and have good stopband responses. Measured results validate the analysis and theoretical prediction with good agreement.     

Frames of Reference in Mobile Augmented Reality Displays.

In 3 experiments, the authors investigated spatial updating in augmented reality environments. Participants learned locations of virtual objects on the physical floor. They were turned to appropriate facing directions while blindfolded before making pointing judgments (e.g., "Imagine you are facing X. Point to Y"). Experiments manipulated the angular difference between the learning heading and the imagined heading and between the actual heading and the imagined heading. The effect of actual-imagined on pointing latency was observed for naive users but not for users with brief training or instructions concerning the fact that objects can move with body movements. The results indicated that naive users used an environment-stabilized reference frame to access information arrays, but with experience and instruction the nature of the representation changed from an environment stabilized to a body stabilized reference frame. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

A disposable sensor based on immobilization of acetylcholinesterase to multiwall carbon nanotube modified screen-printed electrode for determination of carbaryl

A simple method has been devised for immobilization of acetylcholinesterase (AChE) covalent bonding to a multiwall carbon nanotube (MWNT)-cross-linked cellulose acetate composite on a screen-printed carbon electrode (SPCE) and a sensitive and disposable amperometric sensor for rapid determination of carbaryl pesticide is proposed. The immobilized enzyme was preserved on this film because of the excellent biocompatibility and non-toxicity of cellulose acetate. Based on the inherent conductive properties of the MWNT, the immobilized AChE had greater affinity for ATCl and excellent catalytic effect in the hydrolysis of ATCl. MWNT improved the interface enzymatic hydrolysis reaction and increased the amperometric response of the sensor. Under optimum conditions, the inhibition of carbaryl on AChE increased linearly with the increasing concentration of carbaryl in two ranges, from 0.01 to 0.5 μg mL⁻¹ and from 2 to 20 μg mL⁻¹, with the correlation coefficients of 0.9985 and 0.9977, respectively. The detection limit was 0.004 μg mL⁻¹ taken as the concentration equivalent to 10% decrease in signal. The sensor showed acceptable stability, accuracy and could be fabricated in batches, thus it is economic and portable. This type of disposable enzyme-based amperometric sensor has extensive application potential in environmental monitoring of pesticides.     

Synthesis and characterization of a novel proton‐exchange membrane for fuel cells operating at high temperatures and low humidities

The synthesis of a p‐toluidine/formaldehyde (PTF) resin was performed, and the effects of the molar ratio of the individual monomers and the polymerization conditions on the structure of the PTF resin were studied. Fourier transform infrared and ¹³C‐NMR spectra were used to characterize the PTF. Wide‐angle X‐ray diffraction patterns revealed the crystalline structures of various PTFs. Polarized optical microscopy revealed that the molar ratio of the monomers had a strong effect on the crystalline morphologies. A longer polymerization time turned out a polymer with a higher intrinsic viscosity and molecular weight, which led to differences in the proton conductivity. All of the PTFs showed a higher proton conductivity than a commercial Nafion membrane at 90–100°C and 0% relative humidity. The proton conductivity of the PTF series could be improved by sulfonation with sulfuric acid and could be maintained after blending with polyurethane. Pure methanol could be used as a fuel source because of the insolubility and nonwetting properties of PTF in methanol to increase the output current density for a PTF membrane electrode assembly. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

Modeling Multiterminal Spintronic Devices

We are encountering tremendous opportunities and challenges in combining emerging nanotechnology for developing nanoelectronic devices. Researchers are designing nanoelectronic circuits based on newly discovered nanoscale building blocks, such as spintronic devices. In this paper, we calculate conductance in spintronic gates using the nonequilibrium Green's function and show useful operations for "multiterminal" logic gates. These spintronic devices can be used to design complicated spin circuits     

Design of a microstrip filter using multiple capacitively loaded coupled lines

A method to design a microstrip filter has been proposed. The multiple capacitively loaded coupled lines are adopted for the design of the microstrip filter. The filter shows different stopband behaviour with respect to even or odd total number of resonators. The transmission zeros may be located around the lower, higher or both regions of the passband's skirt. The coupling among the capacitively loaded lines can produce another transmission zero particularly in the higher stopband. A bandpass filter and a duplexer utilising these features are designed. The equivalent model is also proposed to illustrate the filter's coupling among these capacitively loaded coupled lines. The design has been verified by experimental results     

A branch-and-price algorithm to solve the molten iron allocation problem in iron and steel industry

The molten iron allocation problem (MIAP) is to allocate molten iron from blast furnaces to steel-making furnaces. The allocation needs to observe the release times of the molten iron defined by the draining plan of the blast furnaces and the transport time between the iron-making and steel-making stages. Time window constraints for processing the molten iron must be satisfied to avoid freezing. The objective is to find a schedule with minimum total weighted completion time. This objective reflects the practical consideration of improving steel-making efficiency and reducing operation cost caused by the need for reheating. Such a problem can be viewed as a parallel machine scheduling problem with time windows which is known to be NP-hard. In this paper, we first formulate the molten iron allocation problem as an integer programming model and then reformulate it as a set partitioning model by applying the Dantzig–Wolfe decomposition. We solve the problem using a column generation-based branch-and-price algorithm. Since the subproblem of column generation is still NP-hard, we propose a state-space relaxation-based dynamic programming algorithm for the subproblem. Computational experiments demonstrate that the proposed algorithm is capable of solving problems with up to 100 jobs to optimality within a reasonable computation time.