Fluidised pellet bed bioreactor: a promising technology for onsite wastewater treatment and reuse.

A pilot-scale fluidised pellet bed (FPB) bioreactor, which combines chemical coagulation, biological degradation, particle pelletisation and separation in one unit, was applied for onsite wastewater treatment and reuse. As a result of rational use of inorganic coagulant and organic polymer and moderate mechanical agitation, spherical particles were generated in the upflow column and a well-fluidised bed was formed. With a continuous supply of dissolved oxygen through a recycling loop, an aerobic condition was kept in the bottom section of the FPB column. Under such conditions the pellets in the FPB column showed the following characteristics: (1) compact structure and high density; (2) rich in microorganisms; and (3) high MLSS and MLVSS concentrations. Therefore, the FPB bioreactor achieved more than 90% removal of SS, COD, BOD and TP from raw domestic wastewater within a total hydraulic retention time (HRT) of only about 30 minutes. It also showed nitrification and denitrification ability and the TN removal could be about 50% as the recycling ratio was increased to 1:1. The treated water quality is generally competitive with the secondary effluent from a conventional activated sludge process. With these advantages the FPB bioreactor is recommendable as a compact system for onsite wastewater treatment and reuse.     

A novel methanol-tolerant Ir-Se chalcogenide electrocatalyst for oyxgen reduction

A novel methanol-tolerant oxygen-reduction catalyst, Iridium-selenium (Ir-Se) chalcogenide, was synthesized by chemical precipitation in an organic solvent. Auger electron spectroscopy (AES) analysis confirmed that the synthesized Ir-Se chalcogenide had a chemical formula of Ir₄Se. This chalcogenide showed strong catalytic activity towards the oxygen reduction reaction (ORR) and a high methanol tolerance. It was found that most of the oxygen could be directly reduced to water through a four-electron pathway with less than 10% hydrogen peroxide (H₂O₂) being produced during the ORR. The improvement in catalytic activity of the Ir-Se chalcogenide in comparison with that of pure Ir might be attributed to the effect of a bimetallic interaction.     

用生态模式建设城市河流防护工程刍议

在城市河流防护工程实践中,传统砌石、混凝土等护砌方式在达到一定的功能目的的同时,产生了许多消极后果。针对用生态模式建设城市河流防护工程,恢复并保护自然水环境进行研究与探讨,可为山东三大工程提供有关技术的可行性与技术支持,做好科技服务。     

Brain-computer communication: motivation, aim, and impact of exploring a virtual apartment.

The step away from a synchronized or cue-based brain-computer interface (BCI) and from laboratory conditions towards real world applications is very important and crucial in BCI research. This work shows that ten naive subjects can be trained in a synchronous paradigm within three sessions to navigate freely through a virtual apartment, whereby at every junction the subjects could decide by their own, how they wanted to explore the virtual environment (VE). This virtual apartment was designed similar to a real world application, with a goal-oriented task, a high mental workload, and a variable decision period for the subject. All subjects were able to perform long and stable motor imagery over a minimum time of 2 s. Using only three electroencephalogram (EEG) channels to analyze these imaginations, we were able to convert them into navigation commands. Additionally, it could be demonstrated that motivation is a very crucial factor in BCI research; motivated subjects perform much better than unmotivated ones.     

Improvement of device performances by thin interlayer in conjugated polymers/methanofullerene plastic solar cell

Recent studies have reported that a thin interlayer between poly(3, 4-ethylene dioxythiophene)-poly(styrene sulfonic acid) (PEDOT: PSS) and an emissive polymer layer leads to a large increase in the performances of polymer light-emitting diodes (PLEDs) by preventing significant quenching of the radiative excitons at the PEDOT: PSS interface; therefore, acting as an efficient exciton-blocking layer. Using the similar idea, a thin interlayer was fabricated between PEDOT: PSS and the active layer of conjugated polymers/methanofullerene composites in a plastic solar cell. The interlayer consisted of a poly(fluorene)-based hole transporter spin-coated directly on top of the PEDOT: PSS layer. The devices with the interlayer exhibited a higher efficiency than in those without the interlayer.     

An analytical study on the thermal characteristics of flat-plate and evacuated solar collectors

In this study, we highlighted differences in the standards used in performance tests of solar collectors. We analyzed testing results for different types of solar collectors to determine the effects of the collector area and mass flow rate, which were not necessarily consistent across all tests. Our analysis showed that the factor,F′ (τα), including collector efficiency factor (F′), could be correlated with the flow rate or area regardless of the collector type. Moreover, the collector loss coefficient (F′U _L ) per flow rate or area for an evacuated collector was less that of a flat-plate collector; this was also correlated with the flow rate or area, regardless of the type of evacuated collector. As a result of this analysis, we propose a modified heat loss coefficient that includes the effects of all parameters that can be considered in a performance test and show that this coefficient could better describe the thermal characteristics of various types of solar collectors.     

Dewpoints of flue gases for energy-recovery system design and operation

Low temperature corrosion from flue gases is a common problem in energy recovery systems. We present a simple computation procedure to estimate the dewpoint of combustion gases, which is the limiting design temperature to prevent corrosion. If the composition of fuel oil and the percentage of CO₂ or O₂ in the flue gases are known, the air ratio, percentage of H₂O, p.p.m. of SO₃ in the flue gas, and the dewpoint can be estimated with an error of 1.9%. The results indicate that the dewpoint is high because the combustion conditions are not appropriately adjusted, even if low sulfur fuel oil is used. We conclude that both the fuel quality and the combustion conditions are controlling variables in the design and operation of energy recovery systems.     

Dependence of electrical properties on interfacial layer of Ta2O5 films

The change in the thickness and chemical states of the interfacial layer and the related electrical properties in Ta₂O₅ films with different annealing temperatures were investigated. The high-resolution transmission electron microscopy and X-ray photoelectron spectroscopy analyses revealed that the 700 °C-annealed Ta₂O₅ film remained to be amorphous and had the thinnest interfacial layer which was caused by Ta-silicate decomposition to Ta₂O₅ and SiO₂. In addition, the electrical properties were improved after annealing treatments. Our results suggest that an annealing treatment at 700 °C results in the highest capacitance and the lowest leakage current in Ta₂O₅ films due to the thinnest interfacial layer and non-crystallization.     

Bandwidth-Compensation Method for Miniaturized Parallel Coupled-Line Filters

This paper proposes a bandwidth-compensation method for miniaturized filters based on short-ended parallel coupled lines. Capacitive loading of such coupled lines is a relatively simple means of reducing the line lengths. In this study, a method is developed that predicts exactly the degree of reduction in the fractional bandwidth due to miniaturization. Using this method, the fractional bandwidth of the prototype coupled line filter can be adjusted, enabling miniaturized filters to maintain the targeted fractional bandwidth. The proposed bandwidth-compensation method applies for any type of filters with coupled lines realized with various transmission lines, with uniform or nonuniform line lengths. Experimental results are also presented that verify the validity of the method.